Struct aws_sdk_s3::input::CopyObjectInput

source · [−]

#[non_exhaustive]
pub struct CopyObjectInput {Show 40 fields
    pub acl: Option<ObjectCannedAcl>,
    pub bucket: Option<String>,
    pub cache_control: Option<String>,
    pub content_disposition: Option<String>,
    pub content_encoding: Option<String>,
    pub content_language: Option<String>,
    pub content_type: Option<String>,
    pub copy_source: Option<String>,
    pub copy_source_if_match: Option<String>,
    pub copy_source_if_modified_since: Option<DateTime>,
    pub copy_source_if_none_match: Option<String>,
    pub copy_source_if_unmodified_since: Option<DateTime>,
    pub expires: Option<DateTime>,
    pub grant_full_control: Option<String>,
    pub grant_read: Option<String>,
    pub grant_read_acp: Option<String>,
    pub grant_write_acp: Option<String>,
    pub key: Option<String>,
    pub metadata: Option<HashMap<String, String>>,
    pub metadata_directive: Option<MetadataDirective>,
    pub tagging_directive: Option<TaggingDirective>,
    pub server_side_encryption: Option<ServerSideEncryption>,
    pub storage_class: Option<StorageClass>,
    pub website_redirect_location: Option<String>,
    pub sse_customer_algorithm: Option<String>,
    pub sse_customer_key: Option<String>,
    pub sse_customer_key_md5: Option<String>,
    pub ssekms_key_id: Option<String>,
    pub ssekms_encryption_context: Option<String>,
    pub bucket_key_enabled: bool,
    pub copy_source_sse_customer_algorithm: Option<String>,
    pub copy_source_sse_customer_key: Option<String>,
    pub copy_source_sse_customer_key_md5: Option<String>,
    pub request_payer: Option<RequestPayer>,
    pub tagging: Option<String>,
    pub object_lock_mode: Option<ObjectLockMode>,
    pub object_lock_retain_until_date: Option<DateTime>,
    pub object_lock_legal_hold_status: Option<ObjectLockLegalHoldStatus>,
    pub expected_bucket_owner: Option<String>,
    pub expected_source_bucket_owner: Option<String>,
}

Fields (Non-exhaustive)

This struct is marked as non-exhaustive

Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.

acl: Option<ObjectCannedAcl>

The canned ACL to apply to the object.

This action is not supported by Amazon S3 on Outposts.

bucket: Option<String>

The name of the destination bucket.

When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.

When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this action using S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon S3 User Guide.

cache_control: Option<String>

Specifies caching behavior along the request/reply chain.

content_disposition: Option<String>

Specifies presentational information for the object.

content_encoding: Option<String>

Specifies what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field.

content_language: Option<String>

The language the content is in.

content_type: Option<String>

A standard MIME type describing the format of the object data.

copy_source: Option<String>

Specifies the source object for the copy operation. You specify the value in one of two formats, depending on whether you want to access the source object through an access point:

For objects not accessed through an access point, specify the name of the source bucket and the key of the source object, separated by a slash (/). For example, to copy the object reports/january.pdf from the bucket awsexamplebucket, use awsexamplebucket/reports/january.pdf. The value must be URL encoded.
For objects accessed through access points, specify the Amazon Resource Name (ARN) of the object as accessed through the access point, in the format arn:aws:s3: : :accesspoint/ /object/. For example, to copy the object reports/january.pdf through access point my-access-point owned by account 123456789012 in Region us-west-2, use the URL encoding of arn:aws:s3:us-west-2:123456789012:accesspoint/my-access-point/object/reports/january.pdf. The value must be URL encoded.

Amazon S3 supports copy operations using access points only when the source and destination buckets are in the same Amazon Web Services Region.

Alternatively, for objects accessed through Amazon S3 on Outposts, specify the ARN of the object as accessed in the format arn:aws:s3-outposts: : :outpost/ /object/. For example, to copy the object reports/january.pdf through outpost my-outpost owned by account 123456789012 in Region us-west-2, use the URL encoding of arn:aws:s3-outposts:us-west-2:123456789012:outpost/my-outpost/object/reports/january.pdf. The value must be URL encoded.

To copy a specific version of an object, append ?versionId= to the value (for example, awsexamplebucket/reports/january.pdf?versionId=QUpfdndhfd8438MNFDN93jdnJFkdmqnh893). If you don't specify a version ID, Amazon S3 copies the latest version of the source object.

copy_source_if_match: Option<String>

Copies the object if its entity tag (ETag) matches the specified tag.

copy_source_if_modified_since: Option<DateTime>

Copies the object if it has been modified since the specified time.

copy_source_if_none_match: Option<String>

Copies the object if its entity tag (ETag) is different than the specified ETag.

copy_source_if_unmodified_since: Option<DateTime>

Copies the object if it hasn't been modified since the specified time.

expires: Option<DateTime>

The date and time at which the object is no longer cacheable.

grant_full_control: Option<String>

Gives the grantee READ, READ_ACP, and WRITE_ACP permissions on the object.

This action is not supported by Amazon S3 on Outposts.

grant_read: Option<String>

Allows grantee to read the object data and its metadata.

This action is not supported by Amazon S3 on Outposts.

grant_read_acp: Option<String>

Allows grantee to read the object ACL.

This action is not supported by Amazon S3 on Outposts.

grant_write_acp: Option<String>

Allows grantee to write the ACL for the applicable object.

This action is not supported by Amazon S3 on Outposts.

key: Option<String>

The key of the destination object.

metadata: Option<HashMap<String, String>>

A map of metadata to store with the object in S3.

metadata_directive: Option<MetadataDirective>

Specifies whether the metadata is copied from the source object or replaced with metadata provided in the request.

tagging_directive: Option<TaggingDirective>

Specifies whether the object tag-set are copied from the source object or replaced with tag-set provided in the request.

server_side_encryption: Option<ServerSideEncryption>

The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms).

storage_class: Option<StorageClass>

By default, Amazon S3 uses the STANDARD Storage Class to store newly created objects. The STANDARD storage class provides high durability and high availability. Depending on performance needs, you can specify a different Storage Class. Amazon S3 on Outposts only uses the OUTPOSTS Storage Class. For more information, see Storage Classes in the Amazon S3 User Guide.

website_redirect_location: Option<String>

If the bucket is configured as a website, redirects requests for this object to another object in the same bucket or to an external URL. Amazon S3 stores the value of this header in the object metadata.

sse_customer_algorithm: Option<String>

Specifies the algorithm to use to when encrypting the object (for example, AES256).

sse_customer_key: Option<String>

Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded; Amazon S3 does not store the encryption key. The key must be appropriate for use with the algorithm specified in the x-amz-server-side-encryption-customer-algorithm header.

sse_customer_key_md5: Option<String>

Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.

ssekms_key_id: Option<String>

Specifies the Amazon Web Services KMS key ID to use for object encryption. All GET and PUT requests for an object protected by Amazon Web Services KMS will fail if not made via SSL or using SigV4. For information about configuring using any of the officially supported Amazon Web Services SDKs and Amazon Web Services CLI, see Specifying the Signature Version in Request Authentication in the Amazon S3 User Guide.

ssekms_encryption_context: Option<String>

Specifies the Amazon Web Services KMS Encryption Context to use for object encryption. The value of this header is a base64-encoded UTF-8 string holding JSON with the encryption context key-value pairs.

bucket_key_enabled: bool

Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using AWS KMS (SSE-KMS). Setting this header to true causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS.

Specifying this header with a COPY action doesn’t affect bucket-level settings for S3 Bucket Key.

copy_source_sse_customer_algorithm: Option<String>

Specifies the algorithm to use when decrypting the source object (for example, AES256).

copy_source_sse_customer_key: Option<String>

Specifies the customer-provided encryption key for Amazon S3 to use to decrypt the source object. The encryption key provided in this header must be one that was used when the source object was created.

copy_source_sse_customer_key_md5: Option<String>

Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.

request_payer: Option<RequestPayer>

Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. For information about downloading objects from requester pays buckets, see Downloading Objects in Requestor Pays Buckets in the Amazon S3 User Guide.

tagging: Option<String>

The tag-set for the object destination object this value must be used in conjunction with the TaggingDirective. The tag-set must be encoded as URL Query parameters.

object_lock_mode: Option<ObjectLockMode>

The Object Lock mode that you want to apply to the copied object.

object_lock_retain_until_date: Option<DateTime>

The date and time when you want the copied object's Object Lock to expire.

object_lock_legal_hold_status: Option<ObjectLockLegalHoldStatus>

Specifies whether you want to apply a Legal Hold to the copied object.

expected_bucket_owner: Option<String>

The account ID of the expected destination bucket owner. If the destination bucket is owned by a different account, the request will fail with an HTTP 403 (Access Denied) error.

expected_source_bucket_owner: Option<String>

The account ID of the expected source bucket owner. If the source bucket is owned by a different account, the request will fail with an HTTP 403 (Access Denied) error.

Struct aws_sdk_s3::input::CopyObjectInput

Fields (Non-exhaustive)

Implementations

impl CopyObjectInput

pub async fn make_operation( &self, _config: &Config) -> Result<Operation<CopyObject, AwsErrorRetryPolicy>, BuildError>

pub fn builder() -> Builder

impl CopyObjectInput

pub fn acl(&self) -> Option<&ObjectCannedAcl>

pub fn bucket(&self) -> Option<&str>

pub fn cache_control(&self) -> Option<&str>

pub fn content_disposition(&self) -> Option<&str>

pub fn content_encoding(&self) -> Option<&str>

pub fn content_language(&self) -> Option<&str>

pub fn content_type(&self) -> Option<&str>

pub fn copy_source(&self) -> Option<&str>

pub fn copy_source_if_match(&self) -> Option<&str>

pub fn copy_source_if_modified_since(&self) -> Option<&DateTime>

pub fn copy_source_if_none_match(&self) -> Option<&str>

pub fn copy_source_if_unmodified_since(&self) -> Option<&DateTime>

pub fn expires(&self) -> Option<&DateTime>

pub fn grant_full_control(&self) -> Option<&str>

pub fn grant_read(&self) -> Option<&str>

pub fn grant_read_acp(&self) -> Option<&str>

pub fn grant_write_acp(&self) -> Option<&str>

pub fn key(&self) -> Option<&str>

pub fn metadata(&self) -> Option<&HashMap<String, String>>

pub fn metadata_directive(&self) -> Option<&MetadataDirective>

pub fn tagging_directive(&self) -> Option<&TaggingDirective>

pub fn server_side_encryption(&self) -> Option<&ServerSideEncryption>

pub fn storage_class(&self) -> Option<&StorageClass>

pub fn website_redirect_location(&self) -> Option<&str>

pub fn sse_customer_algorithm(&self) -> Option<&str>

pub fn sse_customer_key(&self) -> Option<&str>

pub fn sse_customer_key_md5(&self) -> Option<&str>

pub fn ssekms_key_id(&self) -> Option<&str>

pub fn ssekms_encryption_context(&self) -> Option<&str>

pub fn bucket_key_enabled(&self) -> bool

pub fn copy_source_sse_customer_algorithm(&self) -> Option<&str>

pub fn copy_source_sse_customer_key(&self) -> Option<&str>

pub fn copy_source_sse_customer_key_md5(&self) -> Option<&str>

pub fn request_payer(&self) -> Option<&RequestPayer>

pub fn tagging(&self) -> Option<&str>

pub fn object_lock_mode(&self) -> Option<&ObjectLockMode>

pub fn object_lock_retain_until_date(&self) -> Option<&DateTime>

pub fn object_lock_legal_hold_status( &self) -> Option<&ObjectLockLegalHoldStatus>

pub fn expected_bucket_owner(&self) -> Option<&str>

pub fn expected_source_bucket_owner(&self) -> Option<&str>

Trait Implementations

impl Clone for CopyObjectInput

fn clone(&self) -> CopyObjectInput

fn clone_from(&mut self, source: &Self)

impl Debug for CopyObjectInput

fn fmt(&self, f: &mut Formatter<'_>) -> Result

impl PartialEq<CopyObjectInput> for CopyObjectInput

fn eq(&self, other: &CopyObjectInput) -> bool

fn ne(&self, other: &CopyObjectInput) -> bool

impl StructuralPartialEq for CopyObjectInput

Auto Trait Implementations

impl RefUnwindSafe for CopyObjectInput

impl Send for CopyObjectInput

impl Sync for CopyObjectInput

impl Unpin for CopyObjectInput

impl UnwindSafe for CopyObjectInput

Blanket Implementations

impl<T> Any for T where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

impl<T> Borrow<T> for T where T: ?Sized,

fn borrow(&self) -> &T

impl<T> BorrowMut<T> for T where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

impl<T> From<T> for T

fn from(t: T) -> T

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

fn in_current_span(self) -> Instrumented<Self>

impl<T, U> Into<U> for T where U: From<T>,

fn into(self) -> U

impl<T> Same<T> for T

type Output = T

impl<T> ToOwned for T where T: Clone,

pub async fn make_operation(
&self,
_config: &Config
) -> Result<Operation<CopyObject, AwsErrorRetryPolicy>, BuildError>

pub fn object_lock_legal_hold_status(
&self
) -> Option<&ObjectLockLegalHoldStatus>

impl<T> Any for T where
T: 'static + ?Sized,

impl<T> Borrow<T> for T where
T: ?Sized,

impl<T> BorrowMut<T> for T where
T: ?Sized,

impl<T, U> Into<U> for T where
U: From<T>,

impl<T> ToOwned for T where
T: Clone,

impl<T, U> TryFrom<U> for T where
U: Into<T>,

impl<T, U> TryInto<U> for T where
U: TryFrom<T>,

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,