Struct aws_sdk_s3::output::ListObjectsV2Output

#[non_exhaustive]
pub struct ListObjectsV2Output {
    pub is_truncated: bool,
    pub contents: Option<Vec<Object>>,
    pub name: Option<String>,
    pub prefix: Option<String>,
    pub delimiter: Option<String>,
    pub max_keys: i32,
    pub common_prefixes: Option<Vec<CommonPrefix>>,
    pub encoding_type: Option<EncodingType>,
    pub key_count: i32,
    pub continuation_token: Option<String>,
    pub next_continuation_token: Option<String>,
    pub start_after: Option<String>,
}

Fields (Non-exhaustive)

Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.

is_truncated: bool

Set to false if all of the results were returned. Set to true if more keys are available to return. If the number of results exceeds that specified by MaxKeys, all of the results might not be returned.

contents: Option<Vec<Object>>

Metadata about each object returned.

name: Option<String>

The bucket name.

When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.

When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this action using S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon S3 User Guide.

prefix: Option<String>

Keys that begin with the indicated prefix.

delimiter: Option<String>

Causes keys that contain the same string between the prefix and the first occurrence of the delimiter to be rolled up into a single result element in the CommonPrefixes collection. These rolled-up keys are not returned elsewhere in the response. Each rolled-up result counts as only one return against the MaxKeys value.

max_keys: i32

Sets the maximum number of keys returned in the response. By default the action returns up to 1,000 key names. The response might contain fewer keys but will never contain more.

common_prefixes: Option<Vec<CommonPrefix>>

All of the keys (up to 1,000) rolled up into a common prefix count as a single return when calculating the number of returns.

A response can contain CommonPrefixes only if you specify a delimiter.

CommonPrefixes contains all (if there are any) keys between Prefix and the next occurrence of the string specified by a delimiter.

CommonPrefixes lists keys that act like subdirectories in the directory specified by Prefix.

For example, if the prefix is notes/ and the delimiter is a slash (/) as in notes/summer/july, the common prefix is notes/summer/. All of the keys that roll up into a common prefix count as a single return when calculating the number of returns.

encoding_type: Option<EncodingType>

Encoding type used by Amazon S3 to encode object key names in the XML response.

If you specify the encoding-type request parameter, Amazon S3 includes this element in the response, and returns encoded key name values in the following response elements:

Delimiter, Prefix, Key, and StartAfter.

key_count: i32

KeyCount is the number of keys returned with this request. KeyCount will always be less than or equals to MaxKeys field. Say you ask for 50 keys, your result will include less than equals 50 keys

continuation_token: Option<String>

If ContinuationToken was sent with the request, it is included in the response.

next_continuation_token: Option<String>

NextContinuationToken is sent when isTruncated is true, which means there are more keys in the bucket that can be listed. The next list requests to Amazon S3 can be continued with this NextContinuationToken. NextContinuationToken is obfuscated and is not a real key

start_after: Option<String>

If StartAfter was sent with the request, it is included in the response.

Implementations

impl ListObjectsV2Output

pub fn is_truncated(&self) -> bool

Set to false if all of the results were returned. Set to true if more keys are available to return. If the number of results exceeds that specified by MaxKeys, all of the results might not be returned.

pub fn contents(&self) -> Option<&[Object]>

Metadata about each object returned.

pub fn name(&self) -> Option<&str>

The bucket name.

When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.

When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this action using S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon S3 User Guide.

pub fn prefix(&self) -> Option<&str>

Keys that begin with the indicated prefix.

pub fn delimiter(&self) -> Option<&str>

Causes keys that contain the same string between the prefix and the first occurrence of the delimiter to be rolled up into a single result element in the CommonPrefixes collection. These rolled-up keys are not returned elsewhere in the response. Each rolled-up result counts as only one return against the MaxKeys value.

pub fn max_keys(&self) -> i32

Sets the maximum number of keys returned in the response. By default the action returns up to 1,000 key names. The response might contain fewer keys but will never contain more.

pub fn common_prefixes(&self) -> Option<&[CommonPrefix]>

All of the keys (up to 1,000) rolled up into a common prefix count as a single return when calculating the number of returns.

A response can contain CommonPrefixes only if you specify a delimiter.

CommonPrefixes contains all (if there are any) keys between Prefix and the next occurrence of the string specified by a delimiter.

CommonPrefixes lists keys that act like subdirectories in the directory specified by Prefix.

For example, if the prefix is notes/ and the delimiter is a slash (/) as in notes/summer/july, the common prefix is notes/summer/. All of the keys that roll up into a common prefix count as a single return when calculating the number of returns.

pub fn encoding_type(&self) -> Option<&EncodingType>

Encoding type used by Amazon S3 to encode object key names in the XML response.

If you specify the encoding-type request parameter, Amazon S3 includes this element in the response, and returns encoded key name values in the following response elements:

Delimiter, Prefix, Key, and StartAfter.

pub fn key_count(&self) -> i32

KeyCount is the number of keys returned with this request. KeyCount will always be less than or equals to MaxKeys field. Say you ask for 50 keys, your result will include less than equals 50 keys

pub fn continuation_token(&self) -> Option<&str>

If ContinuationToken was sent with the request, it is included in the response.

pub fn next_continuation_token(&self) -> Option<&str>

NextContinuationToken is sent when isTruncated is true, which means there are more keys in the bucket that can be listed. The next list requests to Amazon S3 can be continued with this NextContinuationToken. NextContinuationToken is obfuscated and is not a real key

pub fn start_after(&self) -> Option<&str>

If StartAfter was sent with the request, it is included in the response.

impl ListObjectsV2Output

pub fn builder() -> Builder

Creates a new builder-style object to manufacture ListObjectsV2Output.

Trait Implementations

impl Clone for ListObjectsV2Output

fn clone(&self) -> ListObjectsV2Output

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for ListObjectsV2Output

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq<ListObjectsV2Output> for ListObjectsV2Output

fn eq(&self, other: &ListObjectsV2Output) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &ListObjectsV2Output) -> bool

This method tests for !=.

impl StructuralPartialEq for ListObjectsV2Output