Struct aws_sdk_s3::input::put_bucket_website_input::Builder

pub struct Builder { /* private fields */ }

A builder for PutBucketWebsiteInput.

Implementations

impl Builder

pub fn bucket(self, input: impl Into<String>) -> Self

The bucket name.

Examples found in repository

src/client.rs (line 13320)

        pub fn bucket(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.bucket(input.into());
            self
        }

pub fn set_bucket(self, input: Option<String>) -> Self

The bucket name.

Examples found in repository

src/client.rs (line 13325)

        pub fn set_bucket(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_bucket(input);
            self
        }

pub fn content_md5(self, input: impl Into<String>) -> Self

The base64-encoded 128-bit MD5 digest of the data. You must use this header as a message integrity check to verify that the request body was not corrupted in transit. For more information, see RFC 1864.

For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.

Examples found in repository

src/client.rs (line 13331)

        pub fn content_md5(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.content_md5(input.into());
            self
        }

pub fn set_content_md5(self, input: Option<String>) -> Self

The base64-encoded 128-bit MD5 digest of the data. You must use this header as a message integrity check to verify that the request body was not corrupted in transit. For more information, see RFC 1864.

For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.

Examples found in repository

src/client.rs (line 13337)

        pub fn set_content_md5(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_content_md5(input);
            self
        }

pub fn checksum_algorithm(self, input: ChecksumAlgorithm) -> Self

Indicates the algorithm used to create the checksum for the object when using the SDK. This header will not provide any additional functionality if not using the SDK. When sending this header, there must be a corresponding x-amz-checksum or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request. For more information, see Checking object integrity in the Amazon S3 User Guide.

If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm parameter.

Examples found in repository

src/client.rs (line 13343)

        pub fn checksum_algorithm(mut self, input: crate::model::ChecksumAlgorithm) -> Self {
            self.inner = self.inner.checksum_algorithm(input);
            self
        }

pub fn set_checksum_algorithm(self, input: Option<ChecksumAlgorithm>) -> Self

Indicates the algorithm used to create the checksum for the object when using the SDK. This header will not provide any additional functionality if not using the SDK. When sending this header, there must be a corresponding x-amz-checksum or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request. For more information, see Checking object integrity in the Amazon S3 User Guide.

If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm parameter.

Examples found in repository

src/client.rs (line 13352)

        pub fn set_checksum_algorithm(
            mut self,
            input: std::option::Option<crate::model::ChecksumAlgorithm>,
        ) -> Self {
            self.inner = self.inner.set_checksum_algorithm(input);
            self
        }

pub fn website_configuration(self, input: WebsiteConfiguration) -> Self

Container for the request.

Examples found in repository

src/client.rs (line 13357)

        pub fn website_configuration(mut self, input: crate::model::WebsiteConfiguration) -> Self {
            self.inner = self.inner.website_configuration(input);
            self
        }

pub fn set_website_configuration(
    self,
    input: Option<WebsiteConfiguration>
) -> Self

Container for the request.

Examples found in repository

src/client.rs (line 13365)

        pub fn set_website_configuration(
            mut self,
            input: std::option::Option<crate::model::WebsiteConfiguration>,
        ) -> Self {
            self.inner = self.inner.set_website_configuration(input);
            self
        }

pub fn expected_bucket_owner(self, input: impl Into<String>) -> Self

The account ID of the expected bucket owner. If the bucket is owned by a different account, the request fails with the HTTP status code 403 Forbidden (access denied).

Examples found in repository

src/client.rs (line 13370)

        pub fn expected_bucket_owner(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.expected_bucket_owner(input.into());
            self
        }

pub fn set_expected_bucket_owner(self, input: Option<String>) -> Self

The account ID of the expected bucket owner. If the bucket is owned by a different account, the request fails with the HTTP status code 403 Forbidden (access denied).

Examples found in repository

src/client.rs (line 13378)

        pub fn set_expected_bucket_owner(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_expected_bucket_owner(input);
            self
        }

pub fn build(self) -> Result<PutBucketWebsiteInput, BuildError>

Consumes the builder and constructs a PutBucketWebsiteInput.

Examples found in repository

src/client.rs (line 13287)

        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::operation::customize::CustomizableOperation<
                crate::operation::PutBucketWebsite,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::PutBucketWebsiteError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?
                .make_operation(&handle.conf)
                .await
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?;
            Ok(crate::operation::customize::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::PutBucketWebsiteOutput,
            aws_smithy_http::result::SdkError<crate::error::PutBucketWebsiteError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?
                .make_operation(&self.handle.conf)
                .await
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?;
            self.handle.client.call(op).await
        }

Trait Implementations

impl Clone for Builder

fn clone(&self) -> Builder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Builder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for Builder

fn default() -> Builder

Returns the “default value” for a type.

impl PartialEq<Builder> for Builder

fn eq(&self, other: &Builder) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for Builder