Struct aws_sdk_s3::input::PutBucketLifecycleConfigurationInput

#[non_exhaustive]
pub struct PutBucketLifecycleConfigurationInput { /* private fields */ }

Implementations

impl PutBucketLifecycleConfigurationInput

pub async fn make_operation(
    &self,
    _config: &Config
) -> Result<Operation<PutBucketLifecycleConfiguration, AwsResponseRetryClassifier>, BuildError>

Consumes the builder and constructs an Operation<PutBucketLifecycleConfiguration>

Examples found in repository

src/client.rs (line 11862)

        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::operation::customize::CustomizableOperation<
                crate::operation::PutBucketLifecycleConfiguration,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::PutBucketLifecycleConfigurationError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?
                .make_operation(&handle.conf)
                .await
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?;
            Ok(crate::operation::customize::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::PutBucketLifecycleConfigurationOutput,
            aws_smithy_http::result::SdkError<crate::error::PutBucketLifecycleConfigurationError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?
                .make_operation(&self.handle.conf)
                .await
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?;
            self.handle.client.call(op).await
        }

pub fn builder() -> Builder

Creates a new builder-style object to manufacture PutBucketLifecycleConfigurationInput.

impl PutBucketLifecycleConfigurationInput

pub fn bucket(&self) -> Option<&str>

The name of the bucket for which to set the configuration.

pub fn checksum_algorithm(&self) -> Option<&ChecksumAlgorithm>

Indicates the algorithm used to create the checksum for the object when using the SDK. This header will not provide any additional functionality if not using the SDK. When sending this header, there must be a corresponding x-amz-checksum or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request. For more information, see Checking object integrity in the Amazon S3 User Guide.

If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm parameter.

Examples found in repository

src/input.rs (line 17389)

    pub async fn make_operation(
        &self,
        _config: &crate::config::Config,
    ) -> std::result::Result<
        aws_smithy_http::operation::Operation<
            crate::operation::PutBucketLifecycleConfiguration,
            aws_http::retry::AwsResponseRetryClassifier,
        >,
        aws_smithy_http::operation::error::BuildError,
    > {
        let checksum_algorithm = self.checksum_algorithm().cloned();
        let mut request = {
            fn uri_base(
                _input: &crate::input::PutBucketLifecycleConfigurationInput,
                output: &mut String,
            ) -> Result<(), aws_smithy_http::operation::error::BuildError> {
                let input_150 = &_input.bucket;
                let input_150 = input_150.as_ref().ok_or_else(|| {
                    aws_smithy_http::operation::error::BuildError::missing_field(
                        "bucket",
                        "cannot be empty or unset",
                    )
                })?;
                let bucket = aws_smithy_http::label::fmt_string(
                    input_150,
                    aws_smithy_http::label::EncodingStrategy::Default,
                );
                if bucket.is_empty() {
                    return Err(
                        aws_smithy_http::operation::error::BuildError::missing_field(
                            "bucket",
                            "cannot be empty or unset",
                        ),
                    );
                }
                write!(output, "/{Bucket}", Bucket = bucket).expect("formatting should succeed");
                Ok(())
            }
            fn uri_query(
                _input: &crate::input::PutBucketLifecycleConfigurationInput,
                mut output: &mut String,
            ) -> Result<(), aws_smithy_http::operation::error::BuildError> {
                let mut query = aws_smithy_http::query::Writer::new(&mut output);
                query.push_v("lifecycle");
                Ok(())
            }
            #[allow(clippy::unnecessary_wraps)]
            fn update_http_builder(
                input: &crate::input::PutBucketLifecycleConfigurationInput,
                builder: http::request::Builder,
            ) -> std::result::Result<
                http::request::Builder,
                aws_smithy_http::operation::error::BuildError,
            > {
                let mut uri = String::new();
                uri_base(input, &mut uri)?;
                uri_query(input, &mut uri)?;
                let builder = crate::http_serde::add_headers_put_bucket_lifecycle_configuration(
                    input, builder,
                )?;
                Ok(builder.method("PUT").uri(uri))
            }
            let mut builder = update_http_builder(&self, http::request::Builder::new())?;
            builder = aws_smithy_http::header::set_request_header_if_absent(
                builder,
                http::header::CONTENT_TYPE,
                "application/xml",
            );
            builder
        };
        let mut properties = aws_smithy_http::property_bag::SharedPropertyBag::new();
        #[allow(clippy::useless_conversion)]
        let body = aws_smithy_http::body::SdkBody::from(
            crate::operation_ser::serialize_payload_put_bucket_lifecycle_configuration_input(
                &self.lifecycle_configuration,
            )?,
        );
        if let Some(content_length) = body.content_length() {
            request = aws_smithy_http::header::set_request_header_if_absent(
                request,
                http::header::CONTENT_LENGTH,
                content_length,
            );
        }
        let request = request.body(body).expect("should be valid request");
        let mut request = aws_smithy_http::operation::Request::from_parts(request, properties);
        request
            .properties_mut()
            .insert(aws_smithy_http::http_versions::DEFAULT_HTTP_VERSION_LIST.clone());
        let mut user_agent = aws_http::user_agent::AwsUserAgent::new_from_environment(
            aws_types::os_shim_internal::Env::real(),
            crate::API_METADATA.clone(),
        );
        if let Some(app_name) = _config.app_name() {
            user_agent = user_agent.with_app_name(app_name.clone());
        }
        request.properties_mut().insert(user_agent);
        request = request.augment(|mut req, properties| {
            let checksum_algorithm = checksum_algorithm.as_ref();
            let checksum_algorithm = checksum_algorithm
                .map(|algorithm| algorithm.as_str())
                .or(Some("md5"));
            let checksum_algorithm = match checksum_algorithm {
                Some(algo) => Some(
                    algo.parse::<aws_smithy_checksums::ChecksumAlgorithm>()
                        .map_err(aws_smithy_http::operation::error::BuildError::other)?,
                ),
                None => None,
            };
            if let Some(checksum_algorithm) = checksum_algorithm {
                crate::http_body_checksum::add_checksum_calculation_to_request(
                    &mut req,
                    properties,
                    checksum_algorithm,
                )?;
            }
            Result::<_, aws_smithy_http::operation::error::BuildError>::Ok(req)
        })?;
        let mut signing_config = aws_sig_auth::signer::OperationSigningConfig::default_config();
        signing_config.signing_options.content_sha256_header = true;
        signing_config.signing_options.double_uri_encode = false;
        signing_config.signing_options.normalize_uri_path = false;
        request.properties_mut().insert(signing_config);
        request
            .properties_mut()
            .insert(aws_types::SigningService::from_static(
                _config.signing_service(),
            ));
        if let Some(region) = &_config.region {
            request
                .properties_mut()
                .insert(aws_types::region::SigningRegion::from(region.clone()));
        }
        let endpoint_params = aws_endpoint::Params::new(_config.region.clone());
        request
            .properties_mut()
            .insert::<aws_smithy_http::endpoint::Result>(
                _config.endpoint_resolver.resolve_endpoint(&endpoint_params),
            );
        if let Some(region) = &_config.region {
            request.properties_mut().insert(region.clone());
        }
        aws_http::auth::set_provider(
            &mut request.properties_mut(),
            _config.credentials_provider.clone(),
        );
        let op = aws_smithy_http::operation::Operation::new(
            request,
            crate::operation::PutBucketLifecycleConfiguration::new(),
        )
        .with_metadata(aws_smithy_http::operation::Metadata::new(
            "PutBucketLifecycleConfiguration",
            "s3",
        ));
        let op = op.with_retry_classifier(aws_http::retry::AwsResponseRetryClassifier::new());
        Ok(op)
    }

pub fn lifecycle_configuration(&self) -> Option<&BucketLifecycleConfiguration>

Container for lifecycle rules. You can add as many as 1,000 rules.

pub fn expected_bucket_owner(&self) -> Option<&str>

The account ID of the expected bucket owner. If the bucket is owned by a different account, the request fails with the HTTP status code 403 Forbidden (access denied).

Trait Implementations

impl Clone for PutBucketLifecycleConfigurationInput

fn clone(&self) -> PutBucketLifecycleConfigurationInput

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for PutBucketLifecycleConfigurationInput

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq<PutBucketLifecycleConfigurationInput> for PutBucketLifecycleConfigurationInput

fn eq(&self, other: &PutBucketLifecycleConfigurationInput) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for PutBucketLifecycleConfigurationInput