Struct aws_sdk_s3::input::PutObjectTaggingInput

#[non_exhaustive]
pub struct PutObjectTaggingInput { /* private fields */ }

Implementations

impl PutObjectTaggingInput

pub async fn make_operation(
    &self,
    _config: &Config
) -> Result<Operation<PutObjectTagging, AwsResponseRetryClassifier>, BuildError>

Consumes the builder and constructs an Operation<PutObjectTagging>

Examples found in repository

src/client.rs (line 14872)

        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::operation::customize::CustomizableOperation<
                crate::operation::PutObjectTagging,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::PutObjectTaggingError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?
                .make_operation(&handle.conf)
                .await
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?;
            Ok(crate::operation::customize::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::PutObjectTaggingOutput,
            aws_smithy_http::result::SdkError<crate::error::PutObjectTaggingError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?
                .make_operation(&self.handle.conf)
                .await
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?;
            self.handle.client.call(op).await
        }

pub fn builder() -> Builder

Creates a new builder-style object to manufacture PutObjectTaggingInput.

impl PutObjectTaggingInput

pub fn bucket(&self) -> Option<&str>

The bucket name containing the object.

When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.

When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using Amazon S3 on Outposts in the Amazon S3 User Guide.

pub fn key(&self) -> Option<&str>

Name of the object key.

pub fn version_id(&self) -> Option<&str>

The versionId of the object that the tag-set will be added to.

pub fn content_md5(&self) -> Option<&str>

The MD5 hash for the request body.

For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.

pub fn checksum_algorithm(&self) -> Option<&ChecksumAlgorithm>

Indicates the algorithm used to create the checksum for the object when using the SDK. This header will not provide any additional functionality if not using the SDK. When sending this header, there must be a corresponding x-amz-checksum or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request. For more information, see Checking object integrity in the Amazon S3 User Guide.

If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm parameter.

Examples found in repository

src/input.rs (line 22639)

    pub async fn make_operation(
        &self,
        _config: &crate::config::Config,
    ) -> std::result::Result<
        aws_smithy_http::operation::Operation<
            crate::operation::PutObjectTagging,
            aws_http::retry::AwsResponseRetryClassifier,
        >,
        aws_smithy_http::operation::error::BuildError,
    > {
        let checksum_algorithm = self.checksum_algorithm().cloned();
        let mut request = {
            fn uri_base(
                _input: &crate::input::PutObjectTaggingInput,
                output: &mut String,
            ) -> Result<(), aws_smithy_http::operation::error::BuildError> {
                let input_176 = &_input.bucket;
                let input_176 = input_176.as_ref().ok_or_else(|| {
                    aws_smithy_http::operation::error::BuildError::missing_field(
                        "bucket",
                        "cannot be empty or unset",
                    )
                })?;
                let bucket = aws_smithy_http::label::fmt_string(
                    input_176,
                    aws_smithy_http::label::EncodingStrategy::Default,
                );
                if bucket.is_empty() {
                    return Err(
                        aws_smithy_http::operation::error::BuildError::missing_field(
                            "bucket",
                            "cannot be empty or unset",
                        ),
                    );
                }
                let input_177 = &_input.key;
                let input_177 = input_177.as_ref().ok_or_else(|| {
                    aws_smithy_http::operation::error::BuildError::missing_field(
                        "key",
                        "cannot be empty or unset",
                    )
                })?;
                let key = aws_smithy_http::label::fmt_string(
                    input_177,
                    aws_smithy_http::label::EncodingStrategy::Greedy,
                );
                if key.is_empty() {
                    return Err(
                        aws_smithy_http::operation::error::BuildError::missing_field(
                            "key",
                            "cannot be empty or unset",
                        ),
                    );
                }
                write!(output, "/{Bucket}/{Key}", Bucket = bucket, Key = key)
                    .expect("formatting should succeed");
                Ok(())
            }
            fn uri_query(
                _input: &crate::input::PutObjectTaggingInput,
                mut output: &mut String,
            ) -> Result<(), aws_smithy_http::operation::error::BuildError> {
                let mut query = aws_smithy_http::query::Writer::new(&mut output);
                query.push_v("tagging");
                if let Some(inner_178) = &_input.version_id {
                    {
                        query.push_kv("versionId", &aws_smithy_http::query::fmt_string(&inner_178));
                    }
                }
                Ok(())
            }
            #[allow(clippy::unnecessary_wraps)]
            fn update_http_builder(
                input: &crate::input::PutObjectTaggingInput,
                builder: http::request::Builder,
            ) -> std::result::Result<
                http::request::Builder,
                aws_smithy_http::operation::error::BuildError,
            > {
                let mut uri = String::new();
                uri_base(input, &mut uri)?;
                uri_query(input, &mut uri)?;
                let builder = crate::http_serde::add_headers_put_object_tagging(input, builder)?;
                Ok(builder.method("PUT").uri(uri))
            }
            let mut builder = update_http_builder(&self, http::request::Builder::new())?;
            builder = aws_smithy_http::header::set_request_header_if_absent(
                builder,
                http::header::CONTENT_TYPE,
                "application/xml",
            );
            builder
        };
        let mut properties = aws_smithy_http::property_bag::SharedPropertyBag::new();
        #[allow(clippy::useless_conversion)]
        let body = aws_smithy_http::body::SdkBody::from(
            crate::operation_ser::serialize_payload_put_object_tagging_input(&self.tagging)?,
        );
        if let Some(content_length) = body.content_length() {
            request = aws_smithy_http::header::set_request_header_if_absent(
                request,
                http::header::CONTENT_LENGTH,
                content_length,
            );
        }
        let request = request.body(body).expect("should be valid request");
        let mut request = aws_smithy_http::operation::Request::from_parts(request, properties);
        request
            .properties_mut()
            .insert(aws_smithy_http::http_versions::DEFAULT_HTTP_VERSION_LIST.clone());
        let mut user_agent = aws_http::user_agent::AwsUserAgent::new_from_environment(
            aws_types::os_shim_internal::Env::real(),
            crate::API_METADATA.clone(),
        );
        if let Some(app_name) = _config.app_name() {
            user_agent = user_agent.with_app_name(app_name.clone());
        }
        request.properties_mut().insert(user_agent);
        request = request.augment(|mut req, properties| {
            let checksum_algorithm = checksum_algorithm.as_ref();
            let checksum_algorithm = checksum_algorithm
                .map(|algorithm| algorithm.as_str())
                .or(Some("md5"));
            let checksum_algorithm = match checksum_algorithm {
                Some(algo) => Some(
                    algo.parse::<aws_smithy_checksums::ChecksumAlgorithm>()
                        .map_err(aws_smithy_http::operation::error::BuildError::other)?,
                ),
                None => None,
            };
            if let Some(checksum_algorithm) = checksum_algorithm {
                crate::http_body_checksum::add_checksum_calculation_to_request(
                    &mut req,
                    properties,
                    checksum_algorithm,
                )?;
            }
            Result::<_, aws_smithy_http::operation::error::BuildError>::Ok(req)
        })?;
        let mut signing_config = aws_sig_auth::signer::OperationSigningConfig::default_config();
        signing_config.signing_options.content_sha256_header = true;
        signing_config.signing_options.double_uri_encode = false;
        signing_config.signing_options.normalize_uri_path = false;
        request.properties_mut().insert(signing_config);
        request
            .properties_mut()
            .insert(aws_types::SigningService::from_static(
                _config.signing_service(),
            ));
        if let Some(region) = &_config.region {
            request
                .properties_mut()
                .insert(aws_types::region::SigningRegion::from(region.clone()));
        }
        let endpoint_params = aws_endpoint::Params::new(_config.region.clone());
        request
            .properties_mut()
            .insert::<aws_smithy_http::endpoint::Result>(
                _config.endpoint_resolver.resolve_endpoint(&endpoint_params),
            );
        if let Some(region) = &_config.region {
            request.properties_mut().insert(region.clone());
        }
        aws_http::auth::set_provider(
            &mut request.properties_mut(),
            _config.credentials_provider.clone(),
        );
        let op = aws_smithy_http::operation::Operation::new(
            request,
            crate::operation::PutObjectTagging::new(),
        )
        .with_metadata(aws_smithy_http::operation::Metadata::new(
            "PutObjectTagging",
            "s3",
        ));
        let op = op.with_retry_classifier(aws_http::retry::AwsResponseRetryClassifier::new());
        Ok(op)
    }

pub fn tagging(&self) -> Option<&Tagging>

Container for the TagSet and Tag elements

pub fn expected_bucket_owner(&self) -> Option<&str>

The account ID of the expected bucket owner. If the bucket is owned by a different account, the request fails with the HTTP status code 403 Forbidden (access denied).

pub fn request_payer(&self) -> Option<&RequestPayer>

Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.

Trait Implementations

impl Clone for PutObjectTaggingInput

fn clone(&self) -> PutObjectTaggingInput

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for PutObjectTaggingInput

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq<PutObjectTaggingInput> for PutObjectTaggingInput

fn eq(&self, other: &PutObjectTaggingInput) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for PutObjectTaggingInput