Struct aws_sdk_s3::input::CreateMultipartUploadInput
source · #[non_exhaustive]pub struct CreateMultipartUploadInput { /* private fields */ }Implementations§
source§impl CreateMultipartUploadInput
impl CreateMultipartUploadInput
sourcepub async fn make_operation(
&self,
_config: &Config
) -> Result<Operation<CreateMultipartUpload, AwsResponseRetryClassifier>, BuildError>
pub async fn make_operation(
&self,
_config: &Config
) -> Result<Operation<CreateMultipartUpload, AwsResponseRetryClassifier>, BuildError>
Consumes the builder and constructs an Operation<CreateMultipartUpload>
sourcepub fn builder() -> Builder
pub fn builder() -> Builder
Creates a new builder-style object to manufacture CreateMultipartUploadInput.
source§impl CreateMultipartUploadInput
impl CreateMultipartUploadInput
sourcepub fn acl(&self) -> Option<&ObjectCannedAcl>
pub fn acl(&self) -> Option<&ObjectCannedAcl>
The canned ACL to apply to the object.
This action is not supported by Amazon S3 on Outposts.
sourcepub fn bucket(&self) -> Option<&str>
pub fn bucket(&self) -> Option<&str>
The name of the bucket to which to initiate the upload
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using Amazon S3 on Outposts in the Amazon S3 User Guide.
sourcepub fn cache_control(&self) -> Option<&str>
pub fn cache_control(&self) -> Option<&str>
Specifies caching behavior along the request/reply chain.
sourcepub fn content_disposition(&self) -> Option<&str>
pub fn content_disposition(&self) -> Option<&str>
Specifies presentational information for the object.
sourcepub fn content_encoding(&self) -> Option<&str>
pub fn content_encoding(&self) -> Option<&str>
Specifies what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field.
sourcepub fn content_language(&self) -> Option<&str>
pub fn content_language(&self) -> Option<&str>
The language the content is in.
sourcepub fn content_type(&self) -> Option<&str>
pub fn content_type(&self) -> Option<&str>
A standard MIME type describing the format of the object data.
sourcepub fn expires(&self) -> Option<&DateTime>
pub fn expires(&self) -> Option<&DateTime>
The date and time at which the object is no longer cacheable.
sourcepub fn grant_full_control(&self) -> Option<&str>
pub fn grant_full_control(&self) -> Option<&str>
Gives the grantee READ, READ_ACP, and WRITE_ACP permissions on the object.
This action is not supported by Amazon S3 on Outposts.
sourcepub fn grant_read(&self) -> Option<&str>
pub fn grant_read(&self) -> Option<&str>
Allows grantee to read the object data and its metadata.
This action is not supported by Amazon S3 on Outposts.
sourcepub fn grant_read_acp(&self) -> Option<&str>
pub fn grant_read_acp(&self) -> Option<&str>
Allows grantee to read the object ACL.
This action is not supported by Amazon S3 on Outposts.
sourcepub fn grant_write_acp(&self) -> Option<&str>
pub fn grant_write_acp(&self) -> Option<&str>
Allows grantee to write the ACL for the applicable object.
This action is not supported by Amazon S3 on Outposts.
sourcepub fn key(&self) -> Option<&str>
pub fn key(&self) -> Option<&str>
Object key for which the multipart upload is to be initiated.
sourcepub fn metadata(&self) -> Option<&HashMap<String, String>>
pub fn metadata(&self) -> Option<&HashMap<String, String>>
A map of metadata to store with the object in S3.
sourcepub fn server_side_encryption(&self) -> Option<&ServerSideEncryption>
pub fn server_side_encryption(&self) -> Option<&ServerSideEncryption>
The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms).
sourcepub fn storage_class(&self) -> Option<&StorageClass>
pub fn storage_class(&self) -> Option<&StorageClass>
By default, Amazon S3 uses the STANDARD Storage Class to store newly created objects. The STANDARD storage class provides high durability and high availability. Depending on performance needs, you can specify a different Storage Class. Amazon S3 on Outposts only uses the OUTPOSTS Storage Class. For more information, see Storage Classes in the Amazon S3 User Guide.
sourcepub fn website_redirect_location(&self) -> Option<&str>
pub fn website_redirect_location(&self) -> Option<&str>
If the bucket is configured as a website, redirects requests for this object to another object in the same bucket or to an external URL. Amazon S3 stores the value of this header in the object metadata.
sourcepub fn sse_customer_algorithm(&self) -> Option<&str>
pub fn sse_customer_algorithm(&self) -> Option<&str>
Specifies the algorithm to use to when encrypting the object (for example, AES256).
sourcepub fn sse_customer_key(&self) -> Option<&str>
pub fn sse_customer_key(&self) -> Option<&str>
Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded; Amazon S3 does not store the encryption key. The key must be appropriate for use with the algorithm specified in the x-amz-server-side-encryption-customer-algorithm header.
sourcepub fn sse_customer_key_md5(&self) -> Option<&str>
pub fn sse_customer_key_md5(&self) -> Option<&str>
Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.
sourcepub fn ssekms_key_id(&self) -> Option<&str>
pub fn ssekms_key_id(&self) -> Option<&str>
Specifies the ID of the symmetric customer managed key to use for object encryption. All GET and PUT requests for an object protected by Amazon Web Services KMS will fail if not made via SSL or using SigV4. For information about configuring using any of the officially supported Amazon Web Services SDKs and Amazon Web Services CLI, see Specifying the Signature Version in Request Authentication in the Amazon S3 User Guide.
sourcepub fn ssekms_encryption_context(&self) -> Option<&str>
pub fn ssekms_encryption_context(&self) -> Option<&str>
Specifies the Amazon Web Services KMS Encryption Context to use for object encryption. The value of this header is a base64-encoded UTF-8 string holding JSON with the encryption context key-value pairs.
sourcepub fn bucket_key_enabled(&self) -> bool
pub fn bucket_key_enabled(&self) -> bool
Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using AWS KMS (SSE-KMS). Setting this header to true causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS.
Specifying this header with an object action doesn’t affect bucket-level settings for S3 Bucket Key.
sourcepub fn request_payer(&self) -> Option<&RequestPayer>
pub fn request_payer(&self) -> Option<&RequestPayer>
Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.
sourcepub fn tagging(&self) -> Option<&str>
pub fn tagging(&self) -> Option<&str>
The tag-set for the object. The tag-set must be encoded as URL Query parameters.
sourcepub fn object_lock_mode(&self) -> Option<&ObjectLockMode>
pub fn object_lock_mode(&self) -> Option<&ObjectLockMode>
Specifies the Object Lock mode that you want to apply to the uploaded object.
sourcepub fn object_lock_retain_until_date(&self) -> Option<&DateTime>
pub fn object_lock_retain_until_date(&self) -> Option<&DateTime>
Specifies the date and time when you want the Object Lock to expire.
sourcepub fn object_lock_legal_hold_status(
&self
) -> Option<&ObjectLockLegalHoldStatus>
pub fn object_lock_legal_hold_status(
&self
) -> Option<&ObjectLockLegalHoldStatus>
Specifies whether you want to apply a legal hold to the uploaded object.
sourcepub fn expected_bucket_owner(&self) -> Option<&str>
pub fn expected_bucket_owner(&self) -> Option<&str>
The account ID of the expected bucket owner. If the bucket is owned by a different account, the request fails with the HTTP status code 403 Forbidden (access denied).
sourcepub fn checksum_algorithm(&self) -> Option<&ChecksumAlgorithm>
pub fn checksum_algorithm(&self) -> Option<&ChecksumAlgorithm>
Indicates the algorithm you want Amazon S3 to use to create the checksum for the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
Trait Implementations§
source§impl Clone for CreateMultipartUploadInput
impl Clone for CreateMultipartUploadInput
source§fn clone(&self) -> CreateMultipartUploadInput
fn clone(&self) -> CreateMultipartUploadInput
1.0.0 · source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moresource§impl Debug for CreateMultipartUploadInput
impl Debug for CreateMultipartUploadInput
source§impl PartialEq<CreateMultipartUploadInput> for CreateMultipartUploadInput
impl PartialEq<CreateMultipartUploadInput> for CreateMultipartUploadInput
source§fn eq(&self, other: &CreateMultipartUploadInput) -> bool
fn eq(&self, other: &CreateMultipartUploadInput) -> bool
self and other values to be equal, and is used
by ==.