Struct aws_sdk_s3::input::UploadPartCopyInput

#[non_exhaustive]
pub struct UploadPartCopyInput { /* private fields */ }

Implementations

impl UploadPartCopyInput

pub async fn make_operation(
    &self,
    _config: &Config
) -> Result<Operation<UploadPartCopy, AwsResponseRetryClassifier>, BuildError>

Consumes the builder and constructs an Operation<UploadPartCopy>

pub fn builder() -> Builder

Creates a new builder-style object to manufacture UploadPartCopyInput.

impl UploadPartCopyInput

pub fn bucket(&self) -> Option<&str>

The bucket name.

When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.

When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using Amazon S3 on Outposts in the Amazon S3 User Guide.

pub fn copy_source(&self) -> Option<&str>

Specifies the source object for the copy operation. You specify the value in one of two formats, depending on whether you want to access the source object through an access point:

• For objects not accessed through an access point, specify the name of the source bucket and key of the source object, separated by a slash (/). For example, to copy the object reports/january.pdf from the bucket awsexamplebucket, use awsexamplebucket/reports/january.pdf. The value must be URL-encoded.

• For objects accessed through access points, specify the Amazon Resource Name (ARN) of the object as accessed through the access point, in the format arn:aws:s3: : :accesspoint/ /object/ . For example, to copy the object reports/january.pdf through access point my-access-point owned by account 123456789012 in Region us-west-2, use the URL encoding of arn:aws:s3:us-west-2:123456789012:accesspoint/my-access-point/object/reports/january.pdf. The value must be URL encoded.

  Amazon S3 supports copy operations using access points only when the source and destination buckets are in the same Amazon Web Services Region.

  Alternatively, for objects accessed through Amazon S3 on Outposts, specify the ARN of the object as accessed in the format arn:aws:s3-outposts: : :outpost/ /object/ . For example, to copy the object reports/january.pdf through outpost my-outpost owned by account 123456789012 in Region us-west-2, use the URL encoding of arn:aws:s3-outposts:us-west-2:123456789012:outpost/my-outpost/object/reports/january.pdf. The value must be URL-encoded.

To copy a specific version of an object, append ?versionId= to the value (for example, awsexamplebucket/reports/january.pdf?versionId=QUpfdndhfd8438MNFDN93jdnJFkdmqnh893). If you don't specify a version ID, Amazon S3 copies the latest version of the source object.

pub fn copy_source_if_match(&self) -> Option<&str>

Copies the object if its entity tag (ETag) matches the specified tag.

pub fn copy_source_if_modified_since(&self) -> Option<&DateTime>

Copies the object if it has been modified since the specified time.

pub fn copy_source_if_none_match(&self) -> Option<&str>

Copies the object if its entity tag (ETag) is different than the specified ETag.

pub fn copy_source_if_unmodified_since(&self) -> Option<&DateTime>

Copies the object if it hasn't been modified since the specified time.

pub fn copy_source_range(&self) -> Option<&str>

The range of bytes to copy from the source object. The range value must use the form bytes=first-last, where the first and last are the zero-based byte offsets to copy. For example, bytes=0-9 indicates that you want to copy the first 10 bytes of the source. You can copy a range only if the source object is greater than 5 MB.

pub fn key(&self) -> Option<&str>

Object key for which the multipart upload was initiated.

pub fn part_number(&self) -> i32

Part number of part being copied. This is a positive integer between 1 and 10,000.

pub fn upload_id(&self) -> Option<&str>

Upload ID identifying the multipart upload whose part is being copied.

pub fn sse_customer_algorithm(&self) -> Option<&str>

Specifies the algorithm to use to when encrypting the object (for example, AES256).

pub fn sse_customer_key(&self) -> Option<&str>

Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded; Amazon S3 does not store the encryption key. The key must be appropriate for use with the algorithm specified in the x-amz-server-side-encryption-customer-algorithm header. This must be the same encryption key specified in the initiate multipart upload request.

pub fn sse_customer_key_md5(&self) -> Option<&str>

Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.

pub fn copy_source_sse_customer_algorithm(&self) -> Option<&str>

Specifies the algorithm to use when decrypting the source object (for example, AES256).

pub fn copy_source_sse_customer_key(&self) -> Option<&str>

Specifies the customer-provided encryption key for Amazon S3 to use to decrypt the source object. The encryption key provided in this header must be one that was used when the source object was created.

pub fn copy_source_sse_customer_key_md5(&self) -> Option<&str>

Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.

pub fn request_payer(&self) -> Option<&RequestPayer>

Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.

pub fn expected_bucket_owner(&self) -> Option<&str>

The account ID of the expected destination bucket owner. If the destination bucket is owned by a different account, the request fails with the HTTP status code 403 Forbidden (access denied).

pub fn expected_source_bucket_owner(&self) -> Option<&str>

The account ID of the expected source bucket owner. If the source bucket is owned by a different account, the request fails with the HTTP status code 403 Forbidden (access denied).

Trait Implementations

impl Clone for UploadPartCopyInput

fn clone(&self) -> UploadPartCopyInput

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for UploadPartCopyInput

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq<UploadPartCopyInput> for UploadPartCopyInput

fn eq(&self, other: &UploadPartCopyInput) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for UploadPartCopyInput