pub struct ListObjectsV2FluentBuilder { /* private fields */ }
Expand description

Fluent builder constructing a request to ListObjectsV2.

Returns some or all (up to 1,000) of the objects in a bucket with each request. You can use the request parameters as selection criteria to return a subset of the objects in a bucket. A 200 OK response can contain valid or invalid XML. Make sure to design your application to parse the contents of the response and handle it appropriately. Objects are returned sorted in an ascending order of the respective key names in the list. For more information about listing objects, see Listing object keys programmatically

To use this operation, you must have READ access to the bucket.

To use this action in an Identity and Access Management (IAM) policy, you must have permissions to perform the s3:ListBucket action. The bucket owner has this permission by default and can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources.

This section describes the latest revision of this action. We recommend that you use this revised API for application development. For backward compatibility, Amazon S3 continues to support the prior version of this API, ListObjects.

To get a list of your buckets, see ListBuckets.

The following operations are related to ListObjectsV2:

Implementations§

source§

impl ListObjectsV2FluentBuilder

source

pub async fn customize( self ) -> Result<CustomizableOperation<ListObjectsV2, AwsResponseRetryClassifier>, SdkError<ListObjectsV2Error>>

Consume this builder, creating a customizable operation that can be modified before being sent. The operation’s inner http::Request can be modified as well.

source

pub async fn send( self ) -> Result<ListObjectsV2Output, SdkError<ListObjectsV2Error>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

source

pub fn into_paginator(self) -> ListObjectsV2Paginator

Create a paginator for this request

Paginators are used by calling send().await which returns a Stream.

source

pub fn bucket(self, input: impl Into<String>) -> Self

Bucket name to list.

When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.

When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts in the Amazon S3 User Guide.

source

pub fn set_bucket(self, input: Option<String>) -> Self

Bucket name to list.

When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.

When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts in the Amazon S3 User Guide.

source

pub fn delimiter(self, input: impl Into<String>) -> Self

A delimiter is a character you use to group keys.

source

pub fn set_delimiter(self, input: Option<String>) -> Self

A delimiter is a character you use to group keys.

source

pub fn encoding_type(self, input: EncodingType) -> Self

Encoding type used by Amazon S3 to encode object keys in the response.

source

pub fn set_encoding_type(self, input: Option<EncodingType>) -> Self

Encoding type used by Amazon S3 to encode object keys in the response.

source

pub fn max_keys(self, input: i32) -> Self

Sets the maximum number of keys returned in the response. By default the action returns up to 1,000 key names. The response might contain fewer keys but will never contain more.

source

pub fn set_max_keys(self, input: Option<i32>) -> Self

Sets the maximum number of keys returned in the response. By default the action returns up to 1,000 key names. The response might contain fewer keys but will never contain more.

source

pub fn prefix(self, input: impl Into<String>) -> Self

Limits the response to keys that begin with the specified prefix.

source

pub fn set_prefix(self, input: Option<String>) -> Self

Limits the response to keys that begin with the specified prefix.

source

pub fn continuation_token(self, input: impl Into<String>) -> Self

ContinuationToken indicates Amazon S3 that the list is being continued on this bucket with a token. ContinuationToken is obfuscated and is not a real key.

source

pub fn set_continuation_token(self, input: Option<String>) -> Self

ContinuationToken indicates Amazon S3 that the list is being continued on this bucket with a token. ContinuationToken is obfuscated and is not a real key.

source

pub fn fetch_owner(self, input: bool) -> Self

The owner field is not present in listV2 by default, if you want to return owner field with each key in the result then set the fetch owner field to true.

source

pub fn set_fetch_owner(self, input: Option<bool>) -> Self

The owner field is not present in listV2 by default, if you want to return owner field with each key in the result then set the fetch owner field to true.

source

pub fn start_after(self, input: impl Into<String>) -> Self

StartAfter is where you want Amazon S3 to start listing from. Amazon S3 starts listing after this specified key. StartAfter can be any key in the bucket.

source

pub fn set_start_after(self, input: Option<String>) -> Self

StartAfter is where you want Amazon S3 to start listing from. Amazon S3 starts listing after this specified key. StartAfter can be any key in the bucket.

source

pub fn request_payer(self, input: RequestPayer) -> Self

Confirms that the requester knows that she or he will be charged for the list objects request in V2 style. Bucket owners need not specify this parameter in their requests.

source

pub fn set_request_payer(self, input: Option<RequestPayer>) -> Self

Confirms that the requester knows that she or he will be charged for the list objects request in V2 style. Bucket owners need not specify this parameter in their requests.

source

pub fn expected_bucket_owner(self, input: impl Into<String>) -> Self

The account ID of the expected bucket owner. If the bucket is owned by a different account, the request fails with the HTTP status code 403 Forbidden (access denied).

source

pub fn set_expected_bucket_owner(self, input: Option<String>) -> Self

The account ID of the expected bucket owner. If the bucket is owned by a different account, the request fails with the HTTP status code 403 Forbidden (access denied).

Trait Implementations§

source§

impl Clone for ListObjectsV2FluentBuilder

source§

fn clone(&self) -> ListObjectsV2FluentBuilder

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for ListObjectsV2FluentBuilder

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

const: unstable · source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

const: unstable · source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

const: unstable · source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for Twhere U: From<T>,

const: unstable · source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> Same<T> for T

§

type Output = T

Should always be Self
source§

impl<T> ToOwned for Twhere T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
const: unstable · source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
const: unstable · source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more