pub struct PutBucketAnalyticsConfigurationFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to PutBucketAnalyticsConfiguration.
This operation is not supported for directory buckets.
Sets an analytics configuration for the bucket (specified by the analytics configuration ID). You can have up to 1,000 analytics configurations per bucket.
You can choose to have storage class analysis export analysis reports sent to a comma-separated values (CSV) flat file. See the DataExport request element. Reports are updated daily and are based on the object filters that you configure. When selecting data export, you specify a destination bucket and an optional destination prefix where the file is written. You can export the data to a destination bucket in a different account. However, the destination bucket must be in the same Region as the bucket that you are making the PUT analytics configuration to. For more information, see Amazon S3 Analytics – Storage Class Analysis.
You must create a bucket policy on the destination bucket where the exported file is written to grant permissions to Amazon S3 to write objects to the bucket. For an example policy, see Granting Permissions for Amazon S3 Inventory and Storage Class Analysis.
To use this operation, you must have permissions to perform the s3:PutAnalyticsConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources.
PutBucketAnalyticsConfiguration has the following special errors:
-
-
HTTP Error: HTTP 400 Bad Request
-
Code: InvalidArgument
-
Cause: Invalid argument.
-
-
-
HTTP Error: HTTP 400 Bad Request
-
Code: TooManyConfigurations
-
Cause: You are attempting to create a new configuration but have already reached the 1,000-configuration limit.
-
-
-
HTTP Error: HTTP 403 Forbidden
-
Code: AccessDenied
-
Cause: You are not the owner of the specified bucket, or you do not have the s3:PutAnalyticsConfiguration bucket permission to set the configuration on the bucket.
-
The following operations are related to PutBucketAnalyticsConfiguration:
Implementations§
Source§impl PutBucketAnalyticsConfigurationFluentBuilder
impl PutBucketAnalyticsConfigurationFluentBuilder
Sourcepub fn as_input(&self) -> &PutBucketAnalyticsConfigurationInputBuilder
pub fn as_input(&self) -> &PutBucketAnalyticsConfigurationInputBuilder
Access the PutBucketAnalyticsConfiguration as a reference.
Sourcepub async fn send(
self,
) -> Result<PutBucketAnalyticsConfigurationOutput, SdkError<PutBucketAnalyticsConfigurationError, HttpResponse>>
pub async fn send( self, ) -> Result<PutBucketAnalyticsConfigurationOutput, SdkError<PutBucketAnalyticsConfigurationError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<PutBucketAnalyticsConfigurationOutput, PutBucketAnalyticsConfigurationError, Self>
pub fn customize( self, ) -> CustomizableOperation<PutBucketAnalyticsConfigurationOutput, PutBucketAnalyticsConfigurationError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn bucket(self, input: impl Into<String>) -> Self
pub fn bucket(self, input: impl Into<String>) -> Self
The name of the bucket to which an analytics configuration is stored.
Sourcepub fn set_bucket(self, input: Option<String>) -> Self
pub fn set_bucket(self, input: Option<String>) -> Self
The name of the bucket to which an analytics configuration is stored.
Sourcepub fn get_bucket(&self) -> &Option<String>
pub fn get_bucket(&self) -> &Option<String>
The name of the bucket to which an analytics configuration is stored.
Sourcepub fn id(self, input: impl Into<String>) -> Self
pub fn id(self, input: impl Into<String>) -> Self
The ID that identifies the analytics configuration.
Sourcepub fn set_id(self, input: Option<String>) -> Self
pub fn set_id(self, input: Option<String>) -> Self
The ID that identifies the analytics configuration.
Sourcepub fn analytics_configuration(self, input: AnalyticsConfiguration) -> Self
pub fn analytics_configuration(self, input: AnalyticsConfiguration) -> Self
The configuration and any analyses for the analytics filter.
Sourcepub fn set_analytics_configuration(
self,
input: Option<AnalyticsConfiguration>,
) -> Self
pub fn set_analytics_configuration( self, input: Option<AnalyticsConfiguration>, ) -> Self
The configuration and any analyses for the analytics filter.
Sourcepub fn get_analytics_configuration(&self) -> &Option<AnalyticsConfiguration>
pub fn get_analytics_configuration(&self) -> &Option<AnalyticsConfiguration>
The configuration and any analyses for the analytics filter.
Sourcepub fn expected_bucket_owner(self, input: impl Into<String>) -> Self
pub fn expected_bucket_owner(self, input: impl Into<String>) -> Self
The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).
Sourcepub fn set_expected_bucket_owner(self, input: Option<String>) -> Self
pub fn set_expected_bucket_owner(self, input: Option<String>) -> Self
The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).
Sourcepub fn get_expected_bucket_owner(&self) -> &Option<String>
pub fn get_expected_bucket_owner(&self) -> &Option<String>
The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).
Trait Implementations§
Source§impl Clone for PutBucketAnalyticsConfigurationFluentBuilder
impl Clone for PutBucketAnalyticsConfigurationFluentBuilder
Source§fn clone(&self) -> PutBucketAnalyticsConfigurationFluentBuilder
fn clone(&self) -> PutBucketAnalyticsConfigurationFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for PutBucketAnalyticsConfigurationFluentBuilder
impl !RefUnwindSafe for PutBucketAnalyticsConfigurationFluentBuilder
impl Send for PutBucketAnalyticsConfigurationFluentBuilder
impl Sync for PutBucketAnalyticsConfigurationFluentBuilder
impl Unpin for PutBucketAnalyticsConfigurationFluentBuilder
impl !UnwindSafe for PutBucketAnalyticsConfigurationFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);