aws_sdk_s3::operation::put_bucket_request_payment::builders

Struct PutBucketRequestPaymentInputBuilder

#[non_exhaustive]
pub struct PutBucketRequestPaymentInputBuilder { /* private fields */ }

Expand description

A builder for PutBucketRequestPaymentInput.

Implementations§

Source §

impl PutBucketRequestPaymentInputBuilder

Source

pub fn bucket(self, input: impl Into<String>) -> Self

The bucket name.

This field is required.

Source

pub fn set_bucket(self, input: Option<String>) -> Self

The bucket name.

Source

pub fn get_bucket(&self) -> &Option<String>

The bucket name.

Source

pub fn content_md5(self, input: impl Into<String>) -> Self

The base64-encoded 128-bit MD5 digest of the data. You must use this header as a message integrity check to verify that the request body was not corrupted in transit. For more information, see RFC 1864.

For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.

Source

pub fn set_content_md5(self, input: Option<String>) -> Self

The base64-encoded 128-bit MD5 digest of the data. You must use this header as a message integrity check to verify that the request body was not corrupted in transit. For more information, see RFC 1864.

For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.

Source

pub fn get_content_md5(&self) -> &Option<String>

The base64-encoded 128-bit MD5 digest of the data. You must use this header as a message integrity check to verify that the request body was not corrupted in transit. For more information, see RFC 1864.

For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.

Source

pub fn checksum_algorithm(self, input: ChecksumAlgorithm) -> Self

Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding x-amz-checksum or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request. For more information, see Checking object integrity in the Amazon S3 User Guide.

If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm parameter.

Source

pub fn set_checksum_algorithm(self, input: Option<ChecksumAlgorithm>) -> Self

Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding x-amz-checksum or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request. For more information, see Checking object integrity in the Amazon S3 User Guide.

If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm parameter.

Source

pub fn get_checksum_algorithm(&self) -> &Option<ChecksumAlgorithm>

Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding x-amz-checksum or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request. For more information, see Checking object integrity in the Amazon S3 User Guide.

If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm parameter.

Source

pub fn request_payment_configuration( self, input: RequestPaymentConfiguration, ) -> Self

Container for Payer.

This field is required.

Source

pub fn set_request_payment_configuration( self, input: Option<RequestPaymentConfiguration>, ) -> Self

Container for Payer.

Source

pub fn get_request_payment_configuration( &self, ) -> &Option<RequestPaymentConfiguration>

Container for Payer.

Source

pub fn expected_bucket_owner(self, input: impl Into<String>) -> Self

The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).

Source

pub fn set_expected_bucket_owner(self, input: Option<String>) -> Self

The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).

Source

pub fn get_expected_bucket_owner(&self) -> &Option<String>

The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).

Source

pub fn build(self) -> Result<PutBucketRequestPaymentInput, BuildError>

Consumes the builder and constructs a PutBucketRequestPaymentInput.

Source §

impl PutBucketRequestPaymentInputBuilder

Source

pub async fn send_with( self, client: &Client, ) -> Result<PutBucketRequestPaymentOutput, SdkError<PutBucketRequestPaymentError, HttpResponse>>

Sends a request with this input using the given client.

Trait Implementations§

Source §

impl Clone for PutBucketRequestPaymentInputBuilder

Source §

fn clone(&self) -> PutBucketRequestPaymentInputBuilder

Returns a copy of the value. Read more

1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

Source §

impl Debug for PutBucketRequestPaymentInputBuilder

Source §

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Source §

impl Default for PutBucketRequestPaymentInputBuilder

Source §

fn default() -> PutBucketRequestPaymentInputBuilder

Returns the “default value” for a type. Read more

Source §

impl PartialEq for PutBucketRequestPaymentInputBuilder

Source §

fn eq(&self, other: &PutBucketRequestPaymentInputBuilder) -> bool

Tests for self and other values to be equal, and is used by ==.

1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

Source §

impl StructuralPartialEq for PutBucketRequestPaymentInputBuilder

Auto Trait Implementations§

§

impl UnwindSafe for PutBucketRequestPaymentInputBuilder

Blanket Implementations§

Source §

impl<T> Any for T
where T: 'static + ?Sized,

Source §

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

Source §

impl<T> Borrow<T> for T
where T: ?Sized,

Source §

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

Source §

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source §

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

Source §

impl<T> CloneToUninit for T
where T: Clone,

Source §

unsafe fn clone_to_uninit(&self, dst: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)

Performs copy-assignment from self to dst. Read more

Source §

impl<T> From<T> for T

Source §

fn from(t: T) -> T

Returns the argument unchanged.

Source §

impl<T> Instrument for T

Source §

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more

Source §

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

Source §

impl<T, U> Into for T
where U: From<T>,

Source §

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source §

impl<T> IntoEither for T

Source §

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

Source §

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

Source §

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

Source §

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.

Source §

impl<T> Paint for T
where T: ?Sized,

Source §

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();

Source §

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to Color::Primary.

§Example

println!("{}", value.primary());

Source §

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to Color::Fixed.

§Example

println!("{}", value.fixed(color));

Source §

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to Color::Rgb.

§Example

println!("{}", value.rgb(r, g, b));

Source §

fn black(&self) -> Painted<&T>

Returns self with the fg() set to Color::Black.

§Example

println!("{}", value.black());

Source §

fn red(&self) -> Painted<&T>

Returns self with the fg() set to Color::Red.

§Example

println!("{}", value.red());

Source §

fn green(&self) -> Painted<&T>

Returns self with the fg() set to Color::Green.

§Example

println!("{}", value.green());

Source §

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to Color::Yellow.

§Example

println!("{}", value.yellow());

Source §

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to Color::Blue.

§Example

println!("{}", value.blue());

Source §

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to Color::Magenta.

§Example

println!("{}", value.magenta());

Source §

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to Color::Cyan.

§Example

println!("{}", value.cyan());

Source §

fn white(&self) -> Painted<&T>

Returns self with the fg() set to Color::White.

§Example

println!("{}", value.white());

Source §

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightBlack.

§Example

println!("{}", value.bright_black());

Source §

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightRed.

§Example

println!("{}", value.bright_red());

Source §

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightGreen.

§Example

println!("{}", value.bright_green());

Source §

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightYellow.

§Example

println!("{}", value.bright_yellow());

Source §

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightBlue.

§Example

println!("{}", value.bright_blue());

Source §

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightMagenta.

§Example

println!("{}", value.bright_magenta());

Source §

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightCyan.

§Example

println!("{}", value.bright_cyan());

Source §

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightWhite.

§Example

println!("{}", value.bright_white());

Source §

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();

Source §

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to Color::Primary.

§Example

println!("{}", value.on_primary());

Source §

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to Color::Fixed.

§Example

println!("{}", value.on_fixed(color));

Source §

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to Color::Rgb.

§Example

println!("{}", value.on_rgb(r, g, b));

Source §

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to Color::Black.

§Example

println!("{}", value.on_black());

Source §

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to Color::Red.

§Example

println!("{}", value.on_red());

Source §

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to Color::Green.

§Example

println!("{}", value.on_green());

Source §

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to Color::Yellow.

§Example

println!("{}", value.on_yellow());

Source §

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to Color::Blue.

§Example

println!("{}", value.on_blue());

Source §

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to Color::Magenta.

§Example

println!("{}", value.on_magenta());

Source §

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to Color::Cyan.

§Example

println!("{}", value.on_cyan());

Source §

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to Color::White.

§Example

println!("{}", value.on_white());

Source §

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightBlack.

§Example

println!("{}", value.on_bright_black());

Source §

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightRed.

§Example

println!("{}", value.on_bright_red());

Source §

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightGreen.

§Example

println!("{}", value.on_bright_green());

Source §

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightYellow.

§Example

println!("{}", value.on_bright_yellow());

Source §

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightBlue.

§Example

println!("{}", value.on_bright_blue());

Source §

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightMagenta.

§Example

println!("{}", value.on_bright_magenta());

Source §

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightCyan.

§Example

println!("{}", value.on_bright_cyan());

Source §

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightWhite.

§Example

println!("{}", value.on_bright_white());

Source §

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();

Source §

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Bold.

§Example

println!("{}", value.bold());

Source §

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Dim.

§Example

println!("{}", value.dim());

Source §

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Italic.

§Example

println!("{}", value.italic());

Source §

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Underline.

§Example

println!("{}", value.underline());

Source §

fn blink(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Blink.

§Example

println!("{}", value.blink());

Source §

fn rapid_blink(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::RapidBlink.

§Example

println!("{}", value.rapid_blink());

Source §

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Invert.

§Example

println!("{}", value.invert());

Source §

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Conceal.

§Example

println!("{}", value.conceal());

Source §

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Strike.

§Example

println!("{}", value.strike());

Source §

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();

Source §

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Mask.

§Example

println!("{}", value.mask());

Source §

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Wrap.

§Example

println!("{}", value.wrap());

Source §

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Linger.

§Example

println!("{}", value.linger());

Source §

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to Quirk::Clear.

§Example

println!("{}", value.clear());

Source §

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Resetting.

§Example

println!("{}", value.resetting());

Source §

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Bright.

§Example

println!("{}", value.bright());

Source §

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::OnBright.

§Example

println!("{}", value.on_bright());

Source §

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);

Source §

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more

Source §

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more

Source §

impl<T> Same for T

Source §

type Output = T

Should always be Self

Source §

impl<T> ToOwned for T
where T: Clone,

Source §

type Owned = T

The resulting type after obtaining ownership.

Source §

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

Source §

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more

Source §

impl<T, U> TryFrom for T
where U: Into<T>,

Source §

type Error = Infallible

The type returned in the event of a conversion error.

Source §

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

Source §

impl<T, U> TryInto for T
where U: TryFrom<T>,

Source §

type Error = >::Error

The type returned in the event of a conversion error.

Source §

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

Source §

impl<T> WithSubscriber for T

Source §

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more

Source §

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more

Source §

impl<T> ErasedDestructor for T
where T: 'static,

Source §

Struct PutBucketRequestPaymentInputBuilderCopy item path

Implementations§

impl PutBucketRequestPaymentInputBuilder

pub fn bucket(self, input: impl Into<String>) -> Self

pub fn set_bucket(self, input: Option<String>) -> Self

pub fn get_bucket(&self) -> &Option<String>

pub fn content_md5(self, input: impl Into<String>) -> Self

pub fn set_content_md5(self, input: Option<String>) -> Self

pub fn get_content_md5(&self) -> &Option<String>

pub fn checksum_algorithm(self, input: ChecksumAlgorithm) -> Self

pub fn set_checksum_algorithm(self, input: Option<ChecksumAlgorithm>) -> Self

pub fn get_checksum_algorithm(&self) -> &Option<ChecksumAlgorithm>

pub fn request_payment_configuration( self, input: RequestPaymentConfiguration, ) -> Self

pub fn set_request_payment_configuration( self, input: Option<RequestPaymentConfiguration>, ) -> Self

pub fn get_request_payment_configuration( &self, ) -> &Option<RequestPaymentConfiguration>

pub fn expected_bucket_owner(self, input: impl Into<String>) -> Self

pub fn set_expected_bucket_owner(self, input: Option<String>) -> Self

pub fn get_expected_bucket_owner(&self) -> &Option<String>

pub fn build(self) -> Result<PutBucketRequestPaymentInput, BuildError>

impl PutBucketRequestPaymentInputBuilder

pub async fn send_with( self, client: &Client, ) -> Result<PutBucketRequestPaymentOutput, SdkError<PutBucketRequestPaymentError, HttpResponse>>

Trait Implementations§

impl Clone for PutBucketRequestPaymentInputBuilder

fn clone(&self) -> PutBucketRequestPaymentInputBuilder

fn clone_from(&mut self, source: &Self)

impl Debug for PutBucketRequestPaymentInputBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

impl Default for PutBucketRequestPaymentInputBuilder

fn default() -> PutBucketRequestPaymentInputBuilder

impl PartialEq for PutBucketRequestPaymentInputBuilder

fn eq(&self, other: &PutBucketRequestPaymentInputBuilder) -> bool

fn ne(&self, other: &Rhs) -> bool

impl StructuralPartialEq for PutBucketRequestPaymentInputBuilder

Auto Trait Implementations§

impl Freeze for PutBucketRequestPaymentInputBuilder

impl RefUnwindSafe for PutBucketRequestPaymentInputBuilder

impl Send for PutBucketRequestPaymentInputBuilder

impl Sync for PutBucketRequestPaymentInputBuilder

impl Unpin for PutBucketRequestPaymentInputBuilder

impl UnwindSafe for PutBucketRequestPaymentInputBuilder

Blanket Implementations§

impl<T> Any for Twhere T: 'static + ?Sized,

fn type_id(&self) -> TypeId

impl<T> Borrow<T> for Twhere T: ?Sized,

fn borrow(&self) -> &T

impl<T> BorrowMut<T> for Twhere T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

impl<T> CloneToUninit for Twhere T: Clone,

unsafe fn clone_to_uninit(&self, dst: *mut u8)

impl<T> From<T> for T

fn from(t: T) -> T

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

fn in_current_span(self) -> Instrumented<Self>

impl<T, U> Into<U> for Twhere U: From<T>,

fn into(self) -> U

impl<T> IntoEither for T

fn into_either(self, into_left: bool) -> Either<Self, Self>

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>where F: FnOnce(&Self) -> bool,

impl<Unshared, Shared> IntoShared<Shared> for Unsharedwhere Shared: FromUnshared<Unshared>,

fn into_shared(self) -> Shared

impl<T> Paint for Twhere T: ?Sized,

fn fg(&self, value: Color) -> Painted<&T>

§Example

fn primary(&self) -> Painted<&T>

§Example

fn fixed(&self, color: u8) -> Painted<&T>

§Example

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

§Example

fn black(&self) -> Painted<&T>

§Example

fn red(&self) -> Painted<&T>

§Example

fn green(&self) -> Painted<&T>

§Example

fn yellow(&self) -> Painted<&T>

§Example

fn blue(&self) -> Painted<&T>

§Example

Struct PutBucketRequestPaymentInputBuilder

impl<T> Any for T
where T: 'static + ?Sized,

impl<T> Borrow<T> for T
where T: ?Sized,

impl<T> BorrowMut<T> for T
where T: ?Sized,

impl<T> CloneToUninit for T
where T: Clone,

impl<T, U> Into<U> for T
where U: From<T>,

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

impl<T> Paint for T
where T: ?Sized,