Struct UploadPartOutput

#[non_exhaustive]
pub struct UploadPartOutput {
    pub server_side_encryption: Option<ServerSideEncryption>,
    pub e_tag: Option<String>,
    pub checksum_crc32: Option<String>,
    pub checksum_crc32_c: Option<String>,
    pub checksum_sha1: Option<String>,
    pub checksum_sha256: Option<String>,
    pub sse_customer_algorithm: Option<String>,
    pub sse_customer_key_md5: Option<String>,
    pub ssekms_key_id: Option<String>,
    pub bucket_key_enabled: Option<bool>,
    pub request_charged: Option<RequestCharged>,
    /* private fields */
}

Fields (Non-exhaustive)

Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.

server_side_encryption: Option<ServerSideEncryption>

The server-side encryption algorithm used when you store this object in Amazon S3 (for example, AES256, aws:kms).

e_tag: Option<String>

Entity tag for the uploaded object.

checksum_crc32: Option<String>

The base64-encoded, 32-bit CRC-32 checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

checksum_crc32_c: Option<String>

The base64-encoded, 32-bit CRC-32C checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

checksum_sha1: Option<String>

The base64-encoded, 160-bit SHA-1 digest of the object. This will only be present if it was uploaded with the object. When you use the API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

checksum_sha256: Option<String>

The base64-encoded, 256-bit SHA-256 digest of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

sse_customer_algorithm: Option<String>

If server-side encryption with a customer-provided encryption key was requested, the response will include this header to confirm the encryption algorithm that's used.

This functionality is not supported for directory buckets.

sse_customer_key_md5: Option<String>

If server-side encryption with a customer-provided encryption key was requested, the response will include this header to provide the round-trip message integrity verification of the customer-provided encryption key.

This functionality is not supported for directory buckets.

ssekms_key_id: Option<String>

If present, indicates the ID of the KMS key that was used for object encryption.

bucket_key_enabled: Option<bool>

Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).

request_charged: Option<RequestCharged>

If present, indicates that the requester was successfully charged for the request.

This functionality is not supported for directory buckets.

Implementations

impl UploadPartOutput

pub fn server_side_encryption(&self) -> Option<&ServerSideEncryption>

The server-side encryption algorithm used when you store this object in Amazon S3 (for example, AES256, aws:kms).

pub fn e_tag(&self) -> Option<&str>

Entity tag for the uploaded object.

pub fn checksum_crc32(&self) -> Option<&str>

The base64-encoded, 32-bit CRC-32 checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn checksum_crc32_c(&self) -> Option<&str>

The base64-encoded, 32-bit CRC-32C checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn checksum_sha1(&self) -> Option<&str>

The base64-encoded, 160-bit SHA-1 digest of the object. This will only be present if it was uploaded with the object. When you use the API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn checksum_sha256(&self) -> Option<&str>

The base64-encoded, 256-bit SHA-256 digest of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn sse_customer_algorithm(&self) -> Option<&str>

If server-side encryption with a customer-provided encryption key was requested, the response will include this header to confirm the encryption algorithm that's used.

This functionality is not supported for directory buckets.

pub fn sse_customer_key_md5(&self) -> Option<&str>

If server-side encryption with a customer-provided encryption key was requested, the response will include this header to provide the round-trip message integrity verification of the customer-provided encryption key.

This functionality is not supported for directory buckets.

pub fn ssekms_key_id(&self) -> Option<&str>

If present, indicates the ID of the KMS key that was used for object encryption.

pub fn bucket_key_enabled(&self) -> Option<bool>

Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).

pub fn request_charged(&self) -> Option<&RequestCharged>

If present, indicates that the requester was successfully charged for the request.

This functionality is not supported for directory buckets.

impl UploadPartOutput

pub fn builder() -> UploadPartOutputBuilder

Creates a new builder-style object to manufacture UploadPartOutput.

Trait Implementations

impl Clone for UploadPartOutput

fn clone(&self) -> UploadPartOutput

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for UploadPartOutput

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq for UploadPartOutput

fn eq(&self, other: &UploadPartOutput) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl RequestId for UploadPartOutput

fn request_id(&self) -> Option<&str>

Returns the request ID, or None if the service could not be reached.

impl RequestIdExt for UploadPartOutput

fn extended_request_id(&self) -> Option<&str>

Returns the S3 Extended Request ID necessary when contacting AWS Support.

impl StructuralPartialEq for UploadPartOutput