aws_sdk_s3::types

Struct Error

Source 
#[non_exhaustive]
pub struct Error {
    pub key: Option<String>,
    pub version_id: Option<String>,
    pub code: Option<String>,
    pub message: Option<String>,
}
Expand description

Container for all error elements.

Fields (Non-exhaustive)§

This struct is marked as non-exhaustive
Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.
§key: Option<String>

The error key.

§version_id: Option<String>

The version ID of the error.

This functionality is not supported for directory buckets.

§code: Option<String>

The error code is a string that uniquely identifies an error condition. It is meant to be read and understood by programs that detect and handle errors by type. The following is a list of Amazon S3 error codes. For more information, see Error responses.

    • Code: AccessDenied

    • Description: Access Denied

    • HTTP Status Code: 403 Forbidden

    • SOAP Fault Code Prefix: Client

    • Code: AccountProblem

    • Description: There is a problem with your Amazon Web Services account that prevents the action from completing successfully. Contact Amazon Web Services Support for further assistance.

    • HTTP Status Code: 403 Forbidden

    • SOAP Fault Code Prefix: Client

    • Code: AllAccessDisabled

    • Description: All access to this Amazon S3 resource has been disabled. Contact Amazon Web Services Support for further assistance.

    • HTTP Status Code: 403 Forbidden

    • SOAP Fault Code Prefix: Client

    • Code: AmbiguousGrantByEmailAddress

    • Description: The email address you provided is associated with more than one account.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: AuthorizationHeaderMalformed

    • Description: The authorization header you provided is invalid.

    • HTTP Status Code: 400 Bad Request

    • HTTP Status Code: N/A

    • Code: BadDigest

    • Description: The Content-MD5 you specified did not match what we received.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: BucketAlreadyExists

    • Description: The requested bucket name is not available. The bucket namespace is shared by all users of the system. Please select a different name and try again.

    • HTTP Status Code: 409 Conflict

    • SOAP Fault Code Prefix: Client

    • Code: BucketAlreadyOwnedByYou

    • Description: The bucket you tried to create already exists, and you own it. Amazon S3 returns this error in all Amazon Web Services Regions except in the North Virginia Region. For legacy compatibility, if you re-create an existing bucket that you already own in the North Virginia Region, Amazon S3 returns 200 OK and resets the bucket access control lists (ACLs).

    • Code: 409 Conflict (in all Regions except the North Virginia Region)

    • SOAP Fault Code Prefix: Client

    • Code: BucketNotEmpty

    • Description: The bucket you tried to delete is not empty.

    • HTTP Status Code: 409 Conflict

    • SOAP Fault Code Prefix: Client

    • Code: CredentialsNotSupported

    • Description: This request does not support credentials.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: CrossLocationLoggingProhibited

    • Description: Cross-location logging not allowed. Buckets in one geographic location cannot log information to a bucket in another location.

    • HTTP Status Code: 403 Forbidden

    • SOAP Fault Code Prefix: Client

    • Code: EntityTooSmall

    • Description: Your proposed upload is smaller than the minimum allowed object size.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: EntityTooLarge

    • Description: Your proposed upload exceeds the maximum allowed object size.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: ExpiredToken

    • Description: The provided token has expired.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: IllegalVersioningConfigurationException

    • Description: Indicates that the versioning configuration specified in the request is invalid.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: IncompleteBody

    • Description: You did not provide the number of bytes specified by the Content-Length HTTP header

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: IncorrectNumberOfFilesInPostRequest

    • Description: POST requires exactly one file upload per request.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: InlineDataTooLarge

    • Description: Inline data exceeds the maximum allowed size.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: InternalError

    • Description: We encountered an internal error. Please try again.

    • HTTP Status Code: 500 Internal Server Error

    • SOAP Fault Code Prefix: Server

    • Code: InvalidAccessKeyId

    • Description: The Amazon Web Services access key ID you provided does not exist in our records.

    • HTTP Status Code: 403 Forbidden

    • SOAP Fault Code Prefix: Client

    • Code: InvalidAddressingHeader

    • Description: You must specify the Anonymous role.

    • HTTP Status Code: N/A

    • SOAP Fault Code Prefix: Client

    • Code: InvalidArgument

    • Description: Invalid Argument

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: InvalidBucketName

    • Description: The specified bucket is not valid.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: InvalidBucketState

    • Description: The request is not valid with the current state of the bucket.

    • HTTP Status Code: 409 Conflict

    • SOAP Fault Code Prefix: Client

    • Code: InvalidDigest

    • Description: The Content-MD5 you specified is not valid.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: InvalidEncryptionAlgorithmError

    • Description: The encryption request you specified is not valid. The valid value is AES256.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: InvalidLocationConstraint

    • Description: The specified location constraint is not valid. For more information about Regions, see How to Select a Region for Your Buckets.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: InvalidObjectState

    • Description: The action is not valid for the current state of the object.

    • HTTP Status Code: 403 Forbidden

    • SOAP Fault Code Prefix: Client

    • Code: InvalidPart

    • Description: One or more of the specified parts could not be found. The part might not have been uploaded, or the specified entity tag might not have matched the part's entity tag.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: InvalidPartOrder

    • Description: The list of parts was not in ascending order. Parts list must be specified in order by part number.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: InvalidPayer

    • Description: All access to this object has been disabled. Please contact Amazon Web Services Support for further assistance.

    • HTTP Status Code: 403 Forbidden

    • SOAP Fault Code Prefix: Client

    • Code: InvalidPolicyDocument

    • Description: The content of the form does not meet the conditions specified in the policy document.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: InvalidRange

    • Description: The requested range cannot be satisfied.

    • HTTP Status Code: 416 Requested Range Not Satisfiable

    • SOAP Fault Code Prefix: Client

    • Code: InvalidRequest

    • Description: Please use AWS4-HMAC-SHA256.

    • HTTP Status Code: 400 Bad Request

    • Code: N/A

    • Code: InvalidRequest

    • Description: SOAP requests must be made over an HTTPS connection.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: InvalidRequest

    • Description: Amazon S3 Transfer Acceleration is not supported for buckets with non-DNS compliant names.

    • HTTP Status Code: 400 Bad Request

    • Code: N/A

    • Code: InvalidRequest

    • Description: Amazon S3 Transfer Acceleration is not supported for buckets with periods (.) in their names.

    • HTTP Status Code: 400 Bad Request

    • Code: N/A

    • Code: InvalidRequest

    • Description: Amazon S3 Transfer Accelerate endpoint only supports virtual style requests.

    • HTTP Status Code: 400 Bad Request

    • Code: N/A

    • Code: InvalidRequest

    • Description: Amazon S3 Transfer Accelerate is not configured on this bucket.

    • HTTP Status Code: 400 Bad Request

    • Code: N/A

    • Code: InvalidRequest

    • Description: Amazon S3 Transfer Accelerate is disabled on this bucket.

    • HTTP Status Code: 400 Bad Request

    • Code: N/A

    • Code: InvalidRequest

    • Description: Amazon S3 Transfer Acceleration is not supported on this bucket. Contact Amazon Web Services Support for more information.

    • HTTP Status Code: 400 Bad Request

    • Code: N/A

    • Code: InvalidRequest

    • Description: Amazon S3 Transfer Acceleration cannot be enabled on this bucket. Contact Amazon Web Services Support for more information.

    • HTTP Status Code: 400 Bad Request

    • Code: N/A

    • Code: InvalidSecurity

    • Description: The provided security credentials are not valid.

    • HTTP Status Code: 403 Forbidden

    • SOAP Fault Code Prefix: Client

    • Code: InvalidSOAPRequest

    • Description: The SOAP request body is invalid.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: InvalidStorageClass

    • Description: The storage class you specified is not valid.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: InvalidTargetBucketForLogging

    • Description: The target bucket for logging does not exist, is not owned by you, or does not have the appropriate grants for the log-delivery group.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: InvalidToken

    • Description: The provided token is malformed or otherwise invalid.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: InvalidURI

    • Description: Couldn't parse the specified URI.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: KeyTooLongError

    • Description: Your key is too long.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: MalformedACLError

    • Description: The XML you provided was not well-formed or did not validate against our published schema.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: MalformedPOSTRequest

    • Description: The body of your POST request is not well-formed multipart/form-data.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: MalformedXML

    • Description: This happens when the user sends malformed XML (XML that doesn't conform to the published XSD) for the configuration. The error message is, "The XML you provided was not well-formed or did not validate against our published schema."

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: MaxMessageLengthExceeded

    • Description: Your request was too big.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: MaxPostPreDataLengthExceededError

    • Description: Your POST request fields preceding the upload file were too large.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: MetadataTooLarge

    • Description: Your metadata headers exceed the maximum allowed metadata size.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: MethodNotAllowed

    • Description: The specified method is not allowed against this resource.

    • HTTP Status Code: 405 Method Not Allowed

    • SOAP Fault Code Prefix: Client

    • Code: MissingAttachment

    • Description: A SOAP attachment was expected, but none were found.

    • HTTP Status Code: N/A

    • SOAP Fault Code Prefix: Client

    • Code: MissingContentLength

    • Description: You must provide the Content-Length HTTP header.

    • HTTP Status Code: 411 Length Required

    • SOAP Fault Code Prefix: Client

    • Code: MissingRequestBodyError

    • Description: This happens when the user sends an empty XML document as a request. The error message is, "Request body is empty."

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: MissingSecurityElement

    • Description: The SOAP 1.1 request is missing a security element.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: MissingSecurityHeader

    • Description: Your request is missing a required header.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: NoLoggingStatusForKey

    • Description: There is no such thing as a logging status subresource for a key.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: NoSuchBucket

    • Description: The specified bucket does not exist.

    • HTTP Status Code: 404 Not Found

    • SOAP Fault Code Prefix: Client

    • Code: NoSuchBucketPolicy

    • Description: The specified bucket does not have a bucket policy.

    • HTTP Status Code: 404 Not Found

    • SOAP Fault Code Prefix: Client

    • Code: NoSuchKey

    • Description: The specified key does not exist.

    • HTTP Status Code: 404 Not Found

    • SOAP Fault Code Prefix: Client

    • Code: NoSuchLifecycleConfiguration

    • Description: The lifecycle configuration does not exist.

    • HTTP Status Code: 404 Not Found

    • SOAP Fault Code Prefix: Client

    • Code: NoSuchUpload

    • Description: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.

    • HTTP Status Code: 404 Not Found

    • SOAP Fault Code Prefix: Client

    • Code: NoSuchVersion

    • Description: Indicates that the version ID specified in the request does not match an existing version.

    • HTTP Status Code: 404 Not Found

    • SOAP Fault Code Prefix: Client

    • Code: NotImplemented

    • Description: A header you provided implies functionality that is not implemented.

    • HTTP Status Code: 501 Not Implemented

    • SOAP Fault Code Prefix: Server

    • Code: NotSignedUp

    • Description: Your account is not signed up for the Amazon S3 service. You must sign up before you can use Amazon S3. You can sign up at the following URL: Amazon S3

    • HTTP Status Code: 403 Forbidden

    • SOAP Fault Code Prefix: Client

    • Code: OperationAborted

    • Description: A conflicting conditional action is currently in progress against this resource. Try again.

    • HTTP Status Code: 409 Conflict

    • SOAP Fault Code Prefix: Client

    • Code: PermanentRedirect

    • Description: The bucket you are attempting to access must be addressed using the specified endpoint. Send all future requests to this endpoint.

    • HTTP Status Code: 301 Moved Permanently

    • SOAP Fault Code Prefix: Client

    • Code: PreconditionFailed

    • Description: At least one of the preconditions you specified did not hold.

    • HTTP Status Code: 412 Precondition Failed

    • SOAP Fault Code Prefix: Client

    • Code: Redirect

    • Description: Temporary redirect.

    • HTTP Status Code: 307 Moved Temporarily

    • SOAP Fault Code Prefix: Client

    • Code: RestoreAlreadyInProgress

    • Description: Object restore is already in progress.

    • HTTP Status Code: 409 Conflict

    • SOAP Fault Code Prefix: Client

    • Code: RequestIsNotMultiPartContent

    • Description: Bucket POST must be of the enclosure-type multipart/form-data.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: RequestTimeout

    • Description: Your socket connection to the server was not read from or written to within the timeout period.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: RequestTimeTooSkewed

    • Description: The difference between the request time and the server's time is too large.

    • HTTP Status Code: 403 Forbidden

    • SOAP Fault Code Prefix: Client

    • Code: RequestTorrentOfBucketError

    • Description: Requesting the torrent file of a bucket is not permitted.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: SignatureDoesNotMatch

    • Description: The request signature we calculated does not match the signature you provided. Check your Amazon Web Services secret access key and signing method. For more information, see REST Authentication and SOAP Authentication for details.

    • HTTP Status Code: 403 Forbidden

    • SOAP Fault Code Prefix: Client

    • Code: ServiceUnavailable

    • Description: Service is unable to handle request.

    • HTTP Status Code: 503 Service Unavailable

    • SOAP Fault Code Prefix: Server

    • Code: SlowDown

    • Description: Reduce your request rate.

    • HTTP Status Code: 503 Slow Down

    • SOAP Fault Code Prefix: Server

    • Code: TemporaryRedirect

    • Description: You are being redirected to the bucket while DNS updates.

    • HTTP Status Code: 307 Moved Temporarily

    • SOAP Fault Code Prefix: Client

    • Code: TokenRefreshRequired

    • Description: The provided token must be refreshed.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: TooManyBuckets

    • Description: You have attempted to create more buckets than allowed.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: UnexpectedContent

    • Description: This request does not support content.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: UnresolvableGrantByEmailAddress

    • Description: The email address you provided does not match any account on record.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: UserKeyMustBeSpecified

    • Description: The bucket POST must contain the specified field name. If it is specified, check the order of the fields.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

§message: Option<String>

The error message contains a generic description of the error condition in English. It is intended for a human audience. Simple programs display the message directly to the end user if they encounter an error condition they don't know how or don't care to handle. Sophisticated programs with more exhaustive error handling and proper internationalization are more likely to ignore the error message.

Implementations§

Source§

impl Error

Source

pub fn key(&self) -> Option<&str>

The error key.

Source

pub fn version_id(&self) -> Option<&str>

The version ID of the error.

This functionality is not supported for directory buckets.

Source

pub fn code(&self) -> Option<&str>

The error code is a string that uniquely identifies an error condition. It is meant to be read and understood by programs that detect and handle errors by type. The following is a list of Amazon S3 error codes. For more information, see Error responses.

    • Code: AccessDenied

    • Description: Access Denied

    • HTTP Status Code: 403 Forbidden

    • SOAP Fault Code Prefix: Client

    • Code: AccountProblem

    • Description: There is a problem with your Amazon Web Services account that prevents the action from completing successfully. Contact Amazon Web Services Support for further assistance.

    • HTTP Status Code: 403 Forbidden

    • SOAP Fault Code Prefix: Client

    • Code: AllAccessDisabled

    • Description: All access to this Amazon S3 resource has been disabled. Contact Amazon Web Services Support for further assistance.

    • HTTP Status Code: 403 Forbidden

    • SOAP Fault Code Prefix: Client

    • Code: AmbiguousGrantByEmailAddress

    • Description: The email address you provided is associated with more than one account.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: AuthorizationHeaderMalformed

    • Description: The authorization header you provided is invalid.

    • HTTP Status Code: 400 Bad Request

    • HTTP Status Code: N/A

    • Code: BadDigest

    • Description: The Content-MD5 you specified did not match what we received.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: BucketAlreadyExists

    • Description: The requested bucket name is not available. The bucket namespace is shared by all users of the system. Please select a different name and try again.

    • HTTP Status Code: 409 Conflict

    • SOAP Fault Code Prefix: Client

    • Code: BucketAlreadyOwnedByYou

    • Description: The bucket you tried to create already exists, and you own it. Amazon S3 returns this error in all Amazon Web Services Regions except in the North Virginia Region. For legacy compatibility, if you re-create an existing bucket that you already own in the North Virginia Region, Amazon S3 returns 200 OK and resets the bucket access control lists (ACLs).

    • Code: 409 Conflict (in all Regions except the North Virginia Region)

    • SOAP Fault Code Prefix: Client

    • Code: BucketNotEmpty

    • Description: The bucket you tried to delete is not empty.

    • HTTP Status Code: 409 Conflict

    • SOAP Fault Code Prefix: Client

    • Code: CredentialsNotSupported

    • Description: This request does not support credentials.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: CrossLocationLoggingProhibited

    • Description: Cross-location logging not allowed. Buckets in one geographic location cannot log information to a bucket in another location.

    • HTTP Status Code: 403 Forbidden

    • SOAP Fault Code Prefix: Client

    • Code: EntityTooSmall

    • Description: Your proposed upload is smaller than the minimum allowed object size.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: EntityTooLarge

    • Description: Your proposed upload exceeds the maximum allowed object size.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: ExpiredToken

    • Description: The provided token has expired.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: IllegalVersioningConfigurationException

    • Description: Indicates that the versioning configuration specified in the request is invalid.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: IncompleteBody

    • Description: You did not provide the number of bytes specified by the Content-Length HTTP header

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: IncorrectNumberOfFilesInPostRequest

    • Description: POST requires exactly one file upload per request.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: InlineDataTooLarge

    • Description: Inline data exceeds the maximum allowed size.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: InternalError

    • Description: We encountered an internal error. Please try again.

    • HTTP Status Code: 500 Internal Server Error

    • SOAP Fault Code Prefix: Server

    • Code: InvalidAccessKeyId

    • Description: The Amazon Web Services access key ID you provided does not exist in our records.

    • HTTP Status Code: 403 Forbidden

    • SOAP Fault Code Prefix: Client

    • Code: InvalidAddressingHeader

    • Description: You must specify the Anonymous role.

    • HTTP Status Code: N/A

    • SOAP Fault Code Prefix: Client

    • Code: InvalidArgument

    • Description: Invalid Argument

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: InvalidBucketName

    • Description: The specified bucket is not valid.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: InvalidBucketState

    • Description: The request is not valid with the current state of the bucket.

    • HTTP Status Code: 409 Conflict

    • SOAP Fault Code Prefix: Client

    • Code: InvalidDigest

    • Description: The Content-MD5 you specified is not valid.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: InvalidEncryptionAlgorithmError

    • Description: The encryption request you specified is not valid. The valid value is AES256.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: InvalidLocationConstraint

    • Description: The specified location constraint is not valid. For more information about Regions, see How to Select a Region for Your Buckets.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: InvalidObjectState

    • Description: The action is not valid for the current state of the object.

    • HTTP Status Code: 403 Forbidden

    • SOAP Fault Code Prefix: Client

    • Code: InvalidPart

    • Description: One or more of the specified parts could not be found. The part might not have been uploaded, or the specified entity tag might not have matched the part's entity tag.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: InvalidPartOrder

    • Description: The list of parts was not in ascending order. Parts list must be specified in order by part number.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: InvalidPayer

    • Description: All access to this object has been disabled. Please contact Amazon Web Services Support for further assistance.

    • HTTP Status Code: 403 Forbidden

    • SOAP Fault Code Prefix: Client

    • Code: InvalidPolicyDocument

    • Description: The content of the form does not meet the conditions specified in the policy document.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: InvalidRange

    • Description: The requested range cannot be satisfied.

    • HTTP Status Code: 416 Requested Range Not Satisfiable

    • SOAP Fault Code Prefix: Client

    • Code: InvalidRequest

    • Description: Please use AWS4-HMAC-SHA256.

    • HTTP Status Code: 400 Bad Request

    • Code: N/A

    • Code: InvalidRequest

    • Description: SOAP requests must be made over an HTTPS connection.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: InvalidRequest

    • Description: Amazon S3 Transfer Acceleration is not supported for buckets with non-DNS compliant names.

    • HTTP Status Code: 400 Bad Request

    • Code: N/A

    • Code: InvalidRequest

    • Description: Amazon S3 Transfer Acceleration is not supported for buckets with periods (.) in their names.

    • HTTP Status Code: 400 Bad Request

    • Code: N/A

    • Code: InvalidRequest

    • Description: Amazon S3 Transfer Accelerate endpoint only supports virtual style requests.

    • HTTP Status Code: 400 Bad Request

    • Code: N/A

    • Code: InvalidRequest

    • Description: Amazon S3 Transfer Accelerate is not configured on this bucket.

    • HTTP Status Code: 400 Bad Request

    • Code: N/A

    • Code: InvalidRequest

    • Description: Amazon S3 Transfer Accelerate is disabled on this bucket.

    • HTTP Status Code: 400 Bad Request

    • Code: N/A

    • Code: InvalidRequest

    • Description: Amazon S3 Transfer Acceleration is not supported on this bucket. Contact Amazon Web Services Support for more information.

    • HTTP Status Code: 400 Bad Request

    • Code: N/A

    • Code: InvalidRequest

    • Description: Amazon S3 Transfer Acceleration cannot be enabled on this bucket. Contact Amazon Web Services Support for more information.

    • HTTP Status Code: 400 Bad Request

    • Code: N/A

    • Code: InvalidSecurity

    • Description: The provided security credentials are not valid.

    • HTTP Status Code: 403 Forbidden

    • SOAP Fault Code Prefix: Client

    • Code: InvalidSOAPRequest

    • Description: The SOAP request body is invalid.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: InvalidStorageClass

    • Description: The storage class you specified is not valid.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: InvalidTargetBucketForLogging

    • Description: The target bucket for logging does not exist, is not owned by you, or does not have the appropriate grants for the log-delivery group.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: InvalidToken

    • Description: The provided token is malformed or otherwise invalid.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: InvalidURI

    • Description: Couldn't parse the specified URI.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: KeyTooLongError

    • Description: Your key is too long.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: MalformedACLError

    • Description: The XML you provided was not well-formed or did not validate against our published schema.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: MalformedPOSTRequest

    • Description: The body of your POST request is not well-formed multipart/form-data.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: MalformedXML

    • Description: This happens when the user sends malformed XML (XML that doesn't conform to the published XSD) for the configuration. The error message is, "The XML you provided was not well-formed or did not validate against our published schema."

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: MaxMessageLengthExceeded

    • Description: Your request was too big.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: MaxPostPreDataLengthExceededError

    • Description: Your POST request fields preceding the upload file were too large.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: MetadataTooLarge

    • Description: Your metadata headers exceed the maximum allowed metadata size.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: MethodNotAllowed

    • Description: The specified method is not allowed against this resource.

    • HTTP Status Code: 405 Method Not Allowed

    • SOAP Fault Code Prefix: Client

    • Code: MissingAttachment

    • Description: A SOAP attachment was expected, but none were found.

    • HTTP Status Code: N/A

    • SOAP Fault Code Prefix: Client

    • Code: MissingContentLength

    • Description: You must provide the Content-Length HTTP header.

    • HTTP Status Code: 411 Length Required

    • SOAP Fault Code Prefix: Client

    • Code: MissingRequestBodyError

    • Description: This happens when the user sends an empty XML document as a request. The error message is, "Request body is empty."

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: MissingSecurityElement

    • Description: The SOAP 1.1 request is missing a security element.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: MissingSecurityHeader

    • Description: Your request is missing a required header.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: NoLoggingStatusForKey

    • Description: There is no such thing as a logging status subresource for a key.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: NoSuchBucket

    • Description: The specified bucket does not exist.

    • HTTP Status Code: 404 Not Found

    • SOAP Fault Code Prefix: Client

    • Code: NoSuchBucketPolicy

    • Description: The specified bucket does not have a bucket policy.

    • HTTP Status Code: 404 Not Found

    • SOAP Fault Code Prefix: Client

    • Code: NoSuchKey

    • Description: The specified key does not exist.

    • HTTP Status Code: 404 Not Found

    • SOAP Fault Code Prefix: Client

    • Code: NoSuchLifecycleConfiguration

    • Description: The lifecycle configuration does not exist.

    • HTTP Status Code: 404 Not Found

    • SOAP Fault Code Prefix: Client

    • Code: NoSuchUpload

    • Description: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.

    • HTTP Status Code: 404 Not Found

    • SOAP Fault Code Prefix: Client

    • Code: NoSuchVersion

    • Description: Indicates that the version ID specified in the request does not match an existing version.

    • HTTP Status Code: 404 Not Found

    • SOAP Fault Code Prefix: Client

    • Code: NotImplemented

    • Description: A header you provided implies functionality that is not implemented.

    • HTTP Status Code: 501 Not Implemented

    • SOAP Fault Code Prefix: Server

    • Code: NotSignedUp

    • Description: Your account is not signed up for the Amazon S3 service. You must sign up before you can use Amazon S3. You can sign up at the following URL: Amazon S3

    • HTTP Status Code: 403 Forbidden

    • SOAP Fault Code Prefix: Client

    • Code: OperationAborted

    • Description: A conflicting conditional action is currently in progress against this resource. Try again.

    • HTTP Status Code: 409 Conflict

    • SOAP Fault Code Prefix: Client

    • Code: PermanentRedirect

    • Description: The bucket you are attempting to access must be addressed using the specified endpoint. Send all future requests to this endpoint.

    • HTTP Status Code: 301 Moved Permanently

    • SOAP Fault Code Prefix: Client

    • Code: PreconditionFailed

    • Description: At least one of the preconditions you specified did not hold.

    • HTTP Status Code: 412 Precondition Failed

    • SOAP Fault Code Prefix: Client

    • Code: Redirect

    • Description: Temporary redirect.

    • HTTP Status Code: 307 Moved Temporarily

    • SOAP Fault Code Prefix: Client

    • Code: RestoreAlreadyInProgress

    • Description: Object restore is already in progress.

    • HTTP Status Code: 409 Conflict

    • SOAP Fault Code Prefix: Client

    • Code: RequestIsNotMultiPartContent

    • Description: Bucket POST must be of the enclosure-type multipart/form-data.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: RequestTimeout

    • Description: Your socket connection to the server was not read from or written to within the timeout period.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: RequestTimeTooSkewed

    • Description: The difference between the request time and the server's time is too large.

    • HTTP Status Code: 403 Forbidden

    • SOAP Fault Code Prefix: Client

    • Code: RequestTorrentOfBucketError

    • Description: Requesting the torrent file of a bucket is not permitted.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: SignatureDoesNotMatch

    • Description: The request signature we calculated does not match the signature you provided. Check your Amazon Web Services secret access key and signing method. For more information, see REST Authentication and SOAP Authentication for details.

    • HTTP Status Code: 403 Forbidden

    • SOAP Fault Code Prefix: Client

    • Code: ServiceUnavailable

    • Description: Service is unable to handle request.

    • HTTP Status Code: 503 Service Unavailable

    • SOAP Fault Code Prefix: Server

    • Code: SlowDown

    • Description: Reduce your request rate.

    • HTTP Status Code: 503 Slow Down

    • SOAP Fault Code Prefix: Server

    • Code: TemporaryRedirect

    • Description: You are being redirected to the bucket while DNS updates.

    • HTTP Status Code: 307 Moved Temporarily

    • SOAP Fault Code Prefix: Client

    • Code: TokenRefreshRequired

    • Description: The provided token must be refreshed.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: TooManyBuckets

    • Description: You have attempted to create more buckets than allowed.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: UnexpectedContent

    • Description: This request does not support content.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: UnresolvableGrantByEmailAddress

    • Description: The email address you provided does not match any account on record.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

    • Code: UserKeyMustBeSpecified

    • Description: The bucket POST must contain the specified field name. If it is specified, check the order of the fields.

    • HTTP Status Code: 400 Bad Request

    • SOAP Fault Code Prefix: Client

Source

pub fn message(&self) -> Option<&str>

The error message contains a generic description of the error condition in English. It is intended for a human audience. Simple programs display the message directly to the end user if they encounter an error condition they don't know how or don't care to handle. Sophisticated programs with more exhaustive error handling and proper internationalization are more likely to ignore the error message.

Source§

impl Error

Source

pub fn builder() -> ErrorBuilder

Creates a new builder-style object to manufacture Error.

Trait Implementations§

Source§

impl Clone for Error

Source§

fn clone(&self) -> Error

Returns a copy of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for Error

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl PartialEq for Error

Source§

fn eq(&self, other: &Error) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
Source§

impl StructuralPartialEq for Error

Auto Trait Implementations§

§

impl Freeze for Error

§

impl RefUnwindSafe for Error

§

impl Send for Error

§

impl Sync for Error

§

impl Unpin for Error

§

impl UnwindSafe for Error

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dst: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

Source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
Source§

impl<T> Paint for T
where T: ?Sized,

Source§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
Source§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to Color::Primary.

§Example
println!("{}", value.primary());
Source§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to Color::Fixed.

§Example
println!("{}", value.fixed(color));
Source§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to Color::Rgb.

§Example
println!("{}", value.rgb(r, g, b));
Source§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to Color::Black.

§Example
println!("{}", value.black());
Source§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to Color::Red.

§Example
println!("{}", value.red());
Source§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to Color::Green.

§Example
println!("{}", value.green());
Source§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to Color::Yellow.

§Example
println!("{}", value.yellow());
Source§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to Color::Blue.

§Example
println!("{}", value.blue());
Source§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to Color::Magenta.

§Example
println!("{}", value.magenta());
Source§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to Color::Cyan.

§Example
println!("{}", value.cyan());
Source§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to Color::White.

§Example
println!("{}", value.white());
Source§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightBlack.

§Example
println!("{}", value.bright_black());
Source§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightRed.

§Example
println!("{}", value.bright_red());
Source§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightGreen.

§Example
println!("{}", value.bright_green());
Source§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightYellow.

§Example
println!("{}", value.bright_yellow());
Source§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightBlue.

§Example
println!("{}", value.bright_blue());
Source§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightMagenta.

§Example
println!("{}", value.bright_magenta());
Source§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightCyan.

§Example
println!("{}", value.bright_cyan());
Source§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightWhite.

§Example
println!("{}", value.bright_white());
Source§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
Source§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to Color::Primary.

§Example
println!("{}", value.on_primary());
Source§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to Color::Fixed.

§Example
println!("{}", value.on_fixed(color));
Source§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to Color::Rgb.

§Example
println!("{}", value.on_rgb(r, g, b));
Source§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to Color::Black.

§Example
println!("{}", value.on_black());
Source§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to Color::Red.

§Example
println!("{}", value.on_red());
Source§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to Color::Green.

§Example
println!("{}", value.on_green());
Source§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to Color::Yellow.

§Example
println!("{}", value.on_yellow());
Source§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to Color::Blue.

§Example
println!("{}", value.on_blue());
Source§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to Color::Magenta.

§Example
println!("{}", value.on_magenta());
Source§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to Color::Cyan.

§Example
println!("{}", value.on_cyan());
Source§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to Color::White.

§Example
println!("{}", value.on_white());
Source§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightBlack.

§Example
println!("{}", value.on_bright_black());
Source§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightRed.

§Example
println!("{}", value.on_bright_red());
Source§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightGreen.

§Example
println!("{}", value.on_bright_green());
Source§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightYellow.

§Example
println!("{}", value.on_bright_yellow());
Source§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightBlue.

§Example
println!("{}", value.on_bright_blue());
Source§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightMagenta.

§Example
println!("{}", value.on_bright_magenta());
Source§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightCyan.

§Example
println!("{}", value.on_bright_cyan());
Source§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightWhite.

§Example
println!("{}", value.on_bright_white());
Source§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
Source§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Bold.

§Example
println!("{}", value.bold());
Source§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Dim.

§Example
println!("{}", value.dim());
Source§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Italic.

§Example
println!("{}", value.italic());
Source§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Underline.

§Example
println!("{}", value.underline());

Returns self with the attr() set to Attribute::Blink.

§Example
println!("{}", value.blink());

Returns self with the attr() set to Attribute::RapidBlink.

§Example
println!("{}", value.rapid_blink());
Source§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Invert.

§Example
println!("{}", value.invert());
Source§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Conceal.

§Example
println!("{}", value.conceal());
Source§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Strike.

§Example
println!("{}", value.strike());
Source§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
Source§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Mask.

§Example
println!("{}", value.mask());
Source§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Wrap.

§Example
println!("{}", value.wrap());
Source§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Linger.

§Example
println!("{}", value.linger());
Source§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to Quirk::Clear.

§Example
println!("{}", value.clear());
Source§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Resetting.

§Example
println!("{}", value.resetting());
Source§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Bright.

§Example
println!("{}", value.bright());
Source§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::OnBright.

§Example
println!("{}", value.on_bright());
Source§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
Source§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more
Source§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

impl<T> ErasedDestructor for T
where T: 'static,

Source§

impl<T> MaybeSendSync for T