Struct UpdateServerFluentBuilder

pub struct UpdateServerFluentBuilder { /* private fields */ }

Fluent builder constructing a request to UpdateServer.

Updates the file transfer protocol-enabled server's properties after that server has been created.

The UpdateServer call returns the ServerId of the server you updated.

Implementations

impl UpdateServerFluentBuilder

pub fn as_input(&self) -> &UpdateServerInputBuilder

Access the UpdateServer as a reference.

pub async fn send( self, ) -> Result<UpdateServerOutput, SdkError<UpdateServerError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub fn customize( self, ) -> CustomizableOperation<UpdateServerOutput, UpdateServerError, Self>

Consumes this builder, creating a customizable operation that can be modified before being sent.

pub fn certificate(self, input: impl Into<String>) -> Self

The Amazon Resource Name (ARN) of the Amazon Web ServicesCertificate Manager (ACM) certificate. Required when Protocols is set to FTPS.

To request a new public certificate, see Request a public certificate in the Amazon Web ServicesCertificate Manager User Guide.

To import an existing certificate into ACM, see Importing certificates into ACM in the Amazon Web ServicesCertificate Manager User Guide.

To request a private certificate to use FTPS through private IP addresses, see Request a private certificate in the Amazon Web ServicesCertificate Manager User Guide.

Certificates with the following cryptographic algorithms and key sizes are supported:

• 2048-bit RSA (RSA_2048)

• 4096-bit RSA (RSA_4096)

• Elliptic Prime Curve 256 bit (EC_prime256v1)

• Elliptic Prime Curve 384 bit (EC_secp384r1)

• Elliptic Prime Curve 521 bit (EC_secp521r1)

The certificate must be a valid SSL/TLS X.509 version 3 certificate with FQDN or IP address specified and information about the issuer.

pub fn set_certificate(self, input: Option<String>) -> Self

The Amazon Resource Name (ARN) of the Amazon Web ServicesCertificate Manager (ACM) certificate. Required when Protocols is set to FTPS.

To request a new public certificate, see Request a public certificate in the Amazon Web ServicesCertificate Manager User Guide.

To import an existing certificate into ACM, see Importing certificates into ACM in the Amazon Web ServicesCertificate Manager User Guide.

To request a private certificate to use FTPS through private IP addresses, see Request a private certificate in the Amazon Web ServicesCertificate Manager User Guide.

Certificates with the following cryptographic algorithms and key sizes are supported:

• 2048-bit RSA (RSA_2048)

• 4096-bit RSA (RSA_4096)

• Elliptic Prime Curve 256 bit (EC_prime256v1)

• Elliptic Prime Curve 384 bit (EC_secp384r1)

• Elliptic Prime Curve 521 bit (EC_secp521r1)

The certificate must be a valid SSL/TLS X.509 version 3 certificate with FQDN or IP address specified and information about the issuer.

pub fn get_certificate(&self) -> &Option<String>

The Amazon Resource Name (ARN) of the Amazon Web ServicesCertificate Manager (ACM) certificate. Required when Protocols is set to FTPS.

To request a new public certificate, see Request a public certificate in the Amazon Web ServicesCertificate Manager User Guide.

To import an existing certificate into ACM, see Importing certificates into ACM in the Amazon Web ServicesCertificate Manager User Guide.

To request a private certificate to use FTPS through private IP addresses, see Request a private certificate in the Amazon Web ServicesCertificate Manager User Guide.

Certificates with the following cryptographic algorithms and key sizes are supported:

• 2048-bit RSA (RSA_2048)

• 4096-bit RSA (RSA_4096)

• Elliptic Prime Curve 256 bit (EC_prime256v1)

• Elliptic Prime Curve 384 bit (EC_secp384r1)

• Elliptic Prime Curve 521 bit (EC_secp521r1)

The certificate must be a valid SSL/TLS X.509 version 3 certificate with FQDN or IP address specified and information about the issuer.

pub fn protocol_details(self, input: ProtocolDetails) -> Self

The protocol settings that are configured for your server.

• To indicate passive mode (for FTP and FTPS protocols), use the PassiveIp parameter. Enter a single dotted-quad IPv4 address, such as the external IP address of a firewall, router, or load balancer.

• To ignore the error that is generated when the client attempts to use the SETSTAT command on a file that you are uploading to an Amazon S3 bucket, use the SetStatOption parameter. To have the Transfer Family server ignore the SETSTAT command and upload files without needing to make any changes to your SFTP client, set the value to ENABLE_NO_OP. If you set the SetStatOption parameter to ENABLE_NO_OP, Transfer Family generates a log entry to Amazon CloudWatch Logs, so that you can determine when the client is making a SETSTAT call.

• To determine whether your Transfer Family server resumes recent, negotiated sessions through a unique session ID, use the TlsSessionResumptionMode parameter.

• As2Transports indicates the transport method for the AS2 messages. Currently, only HTTP is supported.

pub fn set_protocol_details(self, input: Option<ProtocolDetails>) -> Self

The protocol settings that are configured for your server.

• To indicate passive mode (for FTP and FTPS protocols), use the PassiveIp parameter. Enter a single dotted-quad IPv4 address, such as the external IP address of a firewall, router, or load balancer.

• To ignore the error that is generated when the client attempts to use the SETSTAT command on a file that you are uploading to an Amazon S3 bucket, use the SetStatOption parameter. To have the Transfer Family server ignore the SETSTAT command and upload files without needing to make any changes to your SFTP client, set the value to ENABLE_NO_OP. If you set the SetStatOption parameter to ENABLE_NO_OP, Transfer Family generates a log entry to Amazon CloudWatch Logs, so that you can determine when the client is making a SETSTAT call.

• To determine whether your Transfer Family server resumes recent, negotiated sessions through a unique session ID, use the TlsSessionResumptionMode parameter.

• As2Transports indicates the transport method for the AS2 messages. Currently, only HTTP is supported.

pub fn get_protocol_details(&self) -> &Option<ProtocolDetails>

The protocol settings that are configured for your server.

• To indicate passive mode (for FTP and FTPS protocols), use the PassiveIp parameter. Enter a single dotted-quad IPv4 address, such as the external IP address of a firewall, router, or load balancer.

• To ignore the error that is generated when the client attempts to use the SETSTAT command on a file that you are uploading to an Amazon S3 bucket, use the SetStatOption parameter. To have the Transfer Family server ignore the SETSTAT command and upload files without needing to make any changes to your SFTP client, set the value to ENABLE_NO_OP. If you set the SetStatOption parameter to ENABLE_NO_OP, Transfer Family generates a log entry to Amazon CloudWatch Logs, so that you can determine when the client is making a SETSTAT call.

• To determine whether your Transfer Family server resumes recent, negotiated sessions through a unique session ID, use the TlsSessionResumptionMode parameter.

• As2Transports indicates the transport method for the AS2 messages. Currently, only HTTP is supported.

pub fn endpoint_details(self, input: EndpointDetails) -> Self

The virtual private cloud (VPC) endpoint settings that are configured for your server. When you host your endpoint within your VPC, you can make your endpoint accessible only to resources within your VPC, or you can attach Elastic IP addresses and make your endpoint accessible to clients over the internet. Your VPC's default security groups are automatically assigned to your endpoint.

pub fn set_endpoint_details(self, input: Option<EndpointDetails>) -> Self

The virtual private cloud (VPC) endpoint settings that are configured for your server. When you host your endpoint within your VPC, you can make your endpoint accessible only to resources within your VPC, or you can attach Elastic IP addresses and make your endpoint accessible to clients over the internet. Your VPC's default security groups are automatically assigned to your endpoint.

pub fn get_endpoint_details(&self) -> &Option<EndpointDetails>

The virtual private cloud (VPC) endpoint settings that are configured for your server. When you host your endpoint within your VPC, you can make your endpoint accessible only to resources within your VPC, or you can attach Elastic IP addresses and make your endpoint accessible to clients over the internet. Your VPC's default security groups are automatically assigned to your endpoint.

pub fn endpoint_type(self, input: EndpointType) -> Self

The type of endpoint that you want your server to use. You can choose to make your server's endpoint publicly accessible (PUBLIC) or host it inside your VPC. With an endpoint that is hosted in a VPC, you can restrict access to your server and resources only within your VPC or choose to make it internet facing by attaching Elastic IP addresses directly to it.

After May 19, 2021, you won't be able to create a server using EndpointType=VPC_ENDPOINT in your Amazon Web Services account if your account hasn't already done so before May 19, 2021. If you have already created servers with EndpointType=VPC_ENDPOINT in your Amazon Web Services account on or before May 19, 2021, you will not be affected. After this date, use EndpointType=VPC.

For more information, see https://docs.aws.amazon.com/transfer/latest/userguide/create-server-in-vpc.html#deprecate-vpc-endpoint.

It is recommended that you use VPC as the EndpointType. With this endpoint type, you have the option to directly associate up to three Elastic IPv4 addresses (BYO IP included) with your server's endpoint and use VPC security groups to restrict traffic by the client's public IP address. This is not possible with EndpointType set to VPC_ENDPOINT.

pub fn set_endpoint_type(self, input: Option<EndpointType>) -> Self

The type of endpoint that you want your server to use. You can choose to make your server's endpoint publicly accessible (PUBLIC) or host it inside your VPC. With an endpoint that is hosted in a VPC, you can restrict access to your server and resources only within your VPC or choose to make it internet facing by attaching Elastic IP addresses directly to it.

After May 19, 2021, you won't be able to create a server using EndpointType=VPC_ENDPOINT in your Amazon Web Services account if your account hasn't already done so before May 19, 2021. If you have already created servers with EndpointType=VPC_ENDPOINT in your Amazon Web Services account on or before May 19, 2021, you will not be affected. After this date, use EndpointType=VPC.

For more information, see https://docs.aws.amazon.com/transfer/latest/userguide/create-server-in-vpc.html#deprecate-vpc-endpoint.

It is recommended that you use VPC as the EndpointType. With this endpoint type, you have the option to directly associate up to three Elastic IPv4 addresses (BYO IP included) with your server's endpoint and use VPC security groups to restrict traffic by the client's public IP address. This is not possible with EndpointType set to VPC_ENDPOINT.

pub fn get_endpoint_type(&self) -> &Option<EndpointType>

The type of endpoint that you want your server to use. You can choose to make your server's endpoint publicly accessible (PUBLIC) or host it inside your VPC. With an endpoint that is hosted in a VPC, you can restrict access to your server and resources only within your VPC or choose to make it internet facing by attaching Elastic IP addresses directly to it.

After May 19, 2021, you won't be able to create a server using EndpointType=VPC_ENDPOINT in your Amazon Web Services account if your account hasn't already done so before May 19, 2021. If you have already created servers with EndpointType=VPC_ENDPOINT in your Amazon Web Services account on or before May 19, 2021, you will not be affected. After this date, use EndpointType=VPC.

For more information, see https://docs.aws.amazon.com/transfer/latest/userguide/create-server-in-vpc.html#deprecate-vpc-endpoint.

It is recommended that you use VPC as the EndpointType. With this endpoint type, you have the option to directly associate up to three Elastic IPv4 addresses (BYO IP included) with your server's endpoint and use VPC security groups to restrict traffic by the client's public IP address. This is not possible with EndpointType set to VPC_ENDPOINT.

pub fn host_key(self, input: impl Into<String>) -> Self

The RSA, ECDSA, or ED25519 private key to use for your SFTP-enabled server. You can add multiple host keys, in case you want to rotate keys, or have a set of active keys that use different algorithms.

Use the following command to generate an RSA 2048 bit key with no passphrase:

ssh-keygen -t rsa -b 2048 -N "" -m PEM -f my-new-server-key.

Use a minimum value of 2048 for the -b option. You can create a stronger key by using 3072 or 4096.

Use the following command to generate an ECDSA 256 bit key with no passphrase:

ssh-keygen -t ecdsa -b 256 -N "" -m PEM -f my-new-server-key.

Valid values for the -b option for ECDSA are 256, 384, and 521.

Use the following command to generate an ED25519 key with no passphrase:

ssh-keygen -t ed25519 -N "" -f my-new-server-key.

For all of these commands, you can replace my-new-server-key with a string of your choice.

If you aren't planning to migrate existing users from an existing SFTP-enabled server to a new server, don't update the host key. Accidentally changing a server's host key can be disruptive.

For more information, see Manage host keys for your SFTP-enabled server in the Transfer Family User Guide.

pub fn set_host_key(self, input: Option<String>) -> Self

The RSA, ECDSA, or ED25519 private key to use for your SFTP-enabled server. You can add multiple host keys, in case you want to rotate keys, or have a set of active keys that use different algorithms.

Use the following command to generate an RSA 2048 bit key with no passphrase:

ssh-keygen -t rsa -b 2048 -N "" -m PEM -f my-new-server-key.

Use a minimum value of 2048 for the -b option. You can create a stronger key by using 3072 or 4096.

Use the following command to generate an ECDSA 256 bit key with no passphrase:

ssh-keygen -t ecdsa -b 256 -N "" -m PEM -f my-new-server-key.

Valid values for the -b option for ECDSA are 256, 384, and 521.

Use the following command to generate an ED25519 key with no passphrase:

ssh-keygen -t ed25519 -N "" -f my-new-server-key.

For all of these commands, you can replace my-new-server-key with a string of your choice.

If you aren't planning to migrate existing users from an existing SFTP-enabled server to a new server, don't update the host key. Accidentally changing a server's host key can be disruptive.

For more information, see Manage host keys for your SFTP-enabled server in the Transfer Family User Guide.

pub fn get_host_key(&self) -> &Option<String>

The RSA, ECDSA, or ED25519 private key to use for your SFTP-enabled server. You can add multiple host keys, in case you want to rotate keys, or have a set of active keys that use different algorithms.

Use the following command to generate an RSA 2048 bit key with no passphrase:

ssh-keygen -t rsa -b 2048 -N "" -m PEM -f my-new-server-key.

Use a minimum value of 2048 for the -b option. You can create a stronger key by using 3072 or 4096.

Use the following command to generate an ECDSA 256 bit key with no passphrase:

ssh-keygen -t ecdsa -b 256 -N "" -m PEM -f my-new-server-key.

Valid values for the -b option for ECDSA are 256, 384, and 521.

Use the following command to generate an ED25519 key with no passphrase:

ssh-keygen -t ed25519 -N "" -f my-new-server-key.

For all of these commands, you can replace my-new-server-key with a string of your choice.

If you aren't planning to migrate existing users from an existing SFTP-enabled server to a new server, don't update the host key. Accidentally changing a server's host key can be disruptive.

For more information, see Manage host keys for your SFTP-enabled server in the Transfer Family User Guide.

pub fn identity_provider_details(self, input: IdentityProviderDetails) -> Self

An array containing all of the information required to call a customer's authentication API method.

pub fn set_identity_provider_details( self, input: Option<IdentityProviderDetails>, ) -> Self

An array containing all of the information required to call a customer's authentication API method.

pub fn get_identity_provider_details(&self) -> &Option<IdentityProviderDetails>

An array containing all of the information required to call a customer's authentication API method.

pub fn logging_role(self, input: impl Into<String>) -> Self

The Amazon Resource Name (ARN) of the Identity and Access Management (IAM) role that allows a server to turn on Amazon CloudWatch logging for Amazon S3 or Amazon EFSevents. When set, you can view user activity in your CloudWatch logs.

pub fn set_logging_role(self, input: Option<String>) -> Self

The Amazon Resource Name (ARN) of the Identity and Access Management (IAM) role that allows a server to turn on Amazon CloudWatch logging for Amazon S3 or Amazon EFSevents. When set, you can view user activity in your CloudWatch logs.

pub fn get_logging_role(&self) -> &Option<String>

The Amazon Resource Name (ARN) of the Identity and Access Management (IAM) role that allows a server to turn on Amazon CloudWatch logging for Amazon S3 or Amazon EFSevents. When set, you can view user activity in your CloudWatch logs.

pub fn post_authentication_login_banner(self, input: impl Into<String>) -> Self

Specifies a string to display when users connect to a server. This string is displayed after the user authenticates.

The SFTP protocol does not support post-authentication display banners.

pub fn set_post_authentication_login_banner(self, input: Option<String>) -> Self

Specifies a string to display when users connect to a server. This string is displayed after the user authenticates.

The SFTP protocol does not support post-authentication display banners.

pub fn get_post_authentication_login_banner(&self) -> &Option<String>

Specifies a string to display when users connect to a server. This string is displayed after the user authenticates.

The SFTP protocol does not support post-authentication display banners.

pub fn pre_authentication_login_banner(self, input: impl Into<String>) -> Self

Specifies a string to display when users connect to a server. This string is displayed before the user authenticates. For example, the following banner displays details about using the system:

This system is for the use of authorized users only. Individuals using this computer system without authority, or in excess of their authority, are subject to having all of their activities on this system monitored and recorded by system personnel.

pub fn set_pre_authentication_login_banner(self, input: Option<String>) -> Self

Specifies a string to display when users connect to a server. This string is displayed before the user authenticates. For example, the following banner displays details about using the system:

This system is for the use of authorized users only. Individuals using this computer system without authority, or in excess of their authority, are subject to having all of their activities on this system monitored and recorded by system personnel.

pub fn get_pre_authentication_login_banner(&self) -> &Option<String>

Specifies a string to display when users connect to a server. This string is displayed before the user authenticates. For example, the following banner displays details about using the system:

This system is for the use of authorized users only. Individuals using this computer system without authority, or in excess of their authority, are subject to having all of their activities on this system monitored and recorded by system personnel.

pub fn protocols(self, input: Protocol) -> Self

Appends an item to Protocols.

To override the contents of this collection use set_protocols.

Specifies the file transfer protocol or protocols over which your file transfer protocol client can connect to your server's endpoint. The available protocols are:

• SFTP (Secure Shell (SSH) File Transfer Protocol): File transfer over SSH

• FTPS (File Transfer Protocol Secure): File transfer with TLS encryption

• FTP (File Transfer Protocol): Unencrypted file transfer

• AS2 (Applicability Statement 2): used for transporting structured business-to-business data

• If you select FTPS, you must choose a certificate stored in Certificate Manager (ACM) which is used to identify your server when clients connect to it over FTPS.

• If Protocol includes either FTP or FTPS, then the EndpointType must be VPC and the IdentityProviderType must be either AWS_DIRECTORY_SERVICE, AWS_LAMBDA, or API_GATEWAY.

• If Protocol includes FTP, then AddressAllocationIds cannot be associated.

• If Protocol is set only to SFTP, the EndpointType can be set to PUBLIC and the IdentityProviderType can be set any of the supported identity types: SERVICE_MANAGED, AWS_DIRECTORY_SERVICE, AWS_LAMBDA, or API_GATEWAY.

• If Protocol includes AS2, then the EndpointType must be VPC, and domain must be Amazon S3.

pub fn set_protocols(self, input: Option<Vec<Protocol>>) -> Self

Specifies the file transfer protocol or protocols over which your file transfer protocol client can connect to your server's endpoint. The available protocols are:

• SFTP (Secure Shell (SSH) File Transfer Protocol): File transfer over SSH

• FTPS (File Transfer Protocol Secure): File transfer with TLS encryption

• FTP (File Transfer Protocol): Unencrypted file transfer

• AS2 (Applicability Statement 2): used for transporting structured business-to-business data

• If you select FTPS, you must choose a certificate stored in Certificate Manager (ACM) which is used to identify your server when clients connect to it over FTPS.

• If Protocol includes either FTP or FTPS, then the EndpointType must be VPC and the IdentityProviderType must be either AWS_DIRECTORY_SERVICE, AWS_LAMBDA, or API_GATEWAY.

• If Protocol includes FTP, then AddressAllocationIds cannot be associated.

• If Protocol is set only to SFTP, the EndpointType can be set to PUBLIC and the IdentityProviderType can be set any of the supported identity types: SERVICE_MANAGED, AWS_DIRECTORY_SERVICE, AWS_LAMBDA, or API_GATEWAY.

• If Protocol includes AS2, then the EndpointType must be VPC, and domain must be Amazon S3.

pub fn get_protocols(&self) -> &Option<Vec<Protocol>>

Specifies the file transfer protocol or protocols over which your file transfer protocol client can connect to your server's endpoint. The available protocols are:

• SFTP (Secure Shell (SSH) File Transfer Protocol): File transfer over SSH

• FTPS (File Transfer Protocol Secure): File transfer with TLS encryption

• FTP (File Transfer Protocol): Unencrypted file transfer

• AS2 (Applicability Statement 2): used for transporting structured business-to-business data

• If you select FTPS, you must choose a certificate stored in Certificate Manager (ACM) which is used to identify your server when clients connect to it over FTPS.

• If Protocol includes either FTP or FTPS, then the EndpointType must be VPC and the IdentityProviderType must be either AWS_DIRECTORY_SERVICE, AWS_LAMBDA, or API_GATEWAY.

• If Protocol includes FTP, then AddressAllocationIds cannot be associated.

• If Protocol is set only to SFTP, the EndpointType can be set to PUBLIC and the IdentityProviderType can be set any of the supported identity types: SERVICE_MANAGED, AWS_DIRECTORY_SERVICE, AWS_LAMBDA, or API_GATEWAY.

• If Protocol includes AS2, then the EndpointType must be VPC, and domain must be Amazon S3.

pub fn security_policy_name(self, input: impl Into<String>) -> Self

Specifies the name of the security policy for the server.

pub fn set_security_policy_name(self, input: Option<String>) -> Self

Specifies the name of the security policy for the server.

pub fn get_security_policy_name(&self) -> &Option<String>

Specifies the name of the security policy for the server.

pub fn server_id(self, input: impl Into<String>) -> Self

A system-assigned unique identifier for a server instance that the Transfer Family user is assigned to.

pub fn set_server_id(self, input: Option<String>) -> Self

A system-assigned unique identifier for a server instance that the Transfer Family user is assigned to.

pub fn get_server_id(&self) -> &Option<String>

A system-assigned unique identifier for a server instance that the Transfer Family user is assigned to.

pub fn workflow_details(self, input: WorkflowDetails) -> Self

Specifies the workflow ID for the workflow to assign and the execution role that's used for executing the workflow.

In addition to a workflow to execute when a file is uploaded completely, WorkflowDetails can also contain a workflow ID (and execution role) for a workflow to execute on partial upload. A partial upload occurs when the server session disconnects while the file is still being uploaded.

To remove an associated workflow from a server, you can provide an empty OnUpload object, as in the following example.

aws transfer update-server --server-id s-01234567890abcdef --workflow-details '{"OnUpload":\[\]}'

pub fn set_workflow_details(self, input: Option<WorkflowDetails>) -> Self

Specifies the workflow ID for the workflow to assign and the execution role that's used for executing the workflow.

In addition to a workflow to execute when a file is uploaded completely, WorkflowDetails can also contain a workflow ID (and execution role) for a workflow to execute on partial upload. A partial upload occurs when the server session disconnects while the file is still being uploaded.

To remove an associated workflow from a server, you can provide an empty OnUpload object, as in the following example.

aws transfer update-server --server-id s-01234567890abcdef --workflow-details '{"OnUpload":\[\]}'

pub fn get_workflow_details(&self) -> &Option<WorkflowDetails>

Specifies the workflow ID for the workflow to assign and the execution role that's used for executing the workflow.

In addition to a workflow to execute when a file is uploaded completely, WorkflowDetails can also contain a workflow ID (and execution role) for a workflow to execute on partial upload. A partial upload occurs when the server session disconnects while the file is still being uploaded.

To remove an associated workflow from a server, you can provide an empty OnUpload object, as in the following example.

aws transfer update-server --server-id s-01234567890abcdef --workflow-details '{"OnUpload":\[\]}'

pub fn structured_log_destinations(self, input: impl Into<String>) -> Self

Appends an item to StructuredLogDestinations.

To override the contents of this collection use set_structured_log_destinations.

Specifies the log groups to which your server logs are sent.

To specify a log group, you must provide the ARN for an existing log group. In this case, the format of the log group is as follows:

arn:aws:logs:region-name:amazon-account-id:log-group:log-group-name:*

For example, arn:aws:logs:us-east-1:111122223333:log-group:mytestgroup:*

If you have previously specified a log group for a server, you can clear it, and in effect turn off structured logging, by providing an empty value for this parameter in an update-server call. For example:

update-server --server-id s-1234567890abcdef0 --structured-log-destinations

pub fn set_structured_log_destinations(self, input: Option<Vec<String>>) -> Self

Specifies the log groups to which your server logs are sent.

To specify a log group, you must provide the ARN for an existing log group. In this case, the format of the log group is as follows:

arn:aws:logs:region-name:amazon-account-id:log-group:log-group-name:*

For example, arn:aws:logs:us-east-1:111122223333:log-group:mytestgroup:*

If you have previously specified a log group for a server, you can clear it, and in effect turn off structured logging, by providing an empty value for this parameter in an update-server call. For example:

update-server --server-id s-1234567890abcdef0 --structured-log-destinations

pub fn get_structured_log_destinations(&self) -> &Option<Vec<String>>

Specifies the log groups to which your server logs are sent.

To specify a log group, you must provide the ARN for an existing log group. In this case, the format of the log group is as follows:

arn:aws:logs:region-name:amazon-account-id:log-group:log-group-name:*

For example, arn:aws:logs:us-east-1:111122223333:log-group:mytestgroup:*

If you have previously specified a log group for a server, you can clear it, and in effect turn off structured logging, by providing an empty value for this parameter in an update-server call. For example:

update-server --server-id s-1234567890abcdef0 --structured-log-destinations

pub fn s3_storage_options(self, input: S3StorageOptions) -> Self

Specifies whether or not performance for your Amazon S3 directories is optimized. This is disabled by default.

By default, home directory mappings have a TYPE of DIRECTORY. If you enable this option, you would then need to explicitly set the HomeDirectoryMapEntry Type to FILE if you want a mapping to have a file target.

pub fn set_s3_storage_options(self, input: Option<S3StorageOptions>) -> Self

Specifies whether or not performance for your Amazon S3 directories is optimized. This is disabled by default.

By default, home directory mappings have a TYPE of DIRECTORY. If you enable this option, you would then need to explicitly set the HomeDirectoryMapEntry Type to FILE if you want a mapping to have a file target.

pub fn get_s3_storage_options(&self) -> &Option<S3StorageOptions>

Specifies whether or not performance for your Amazon S3 directories is optimized. This is disabled by default.

By default, home directory mappings have a TYPE of DIRECTORY. If you enable this option, you would then need to explicitly set the HomeDirectoryMapEntry Type to FILE if you want a mapping to have a file target.

Trait Implementations

impl Clone for UpdateServerFluentBuilder

fn clone(&self) -> UpdateServerFluentBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for UpdateServerFluentBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.