aws_sdk_waf::types::builders

Struct ByteMatchTupleBuilder

Source 
#[non_exhaustive]
pub struct ByteMatchTupleBuilder { /* private fields */ }
Expand description

A builder for ByteMatchTuple.

Implementations§

Source§

impl ByteMatchTupleBuilder

Source

pub fn field_to_match(self, input: FieldToMatch) -> Self

The part of a web request that you want AWS WAF to search, such as a specified header or a query string. For more information, see FieldToMatch.

This field is required.
Source

pub fn set_field_to_match(self, input: Option<FieldToMatch>) -> Self

The part of a web request that you want AWS WAF to search, such as a specified header or a query string. For more information, see FieldToMatch.

Source

pub fn get_field_to_match(&self) -> &Option<FieldToMatch>

The part of a web request that you want AWS WAF to search, such as a specified header or a query string. For more information, see FieldToMatch.

Source

pub fn target_string(self, input: Blob) -> Self

The value that you want AWS WAF to search for. AWS WAF searches for the specified string in the part of web requests that you specified in FieldToMatch. The maximum length of the value is 50 bytes.

Valid values depend on the values that you specified for FieldToMatch:

  • HEADER: The value that you want AWS WAF to search for in the request header that you specified in FieldToMatch, for example, the value of the User-Agent or Referer header.

  • METHOD: The HTTP method, which indicates the type of operation specified in the request. CloudFront supports the following methods: DELETE, GET, HEAD, OPTIONS, PATCH, POST, and PUT.

  • QUERY_STRING: The value that you want AWS WAF to search for in the query string, which is the part of a URL that appears after a ? character.

  • URI: The value that you want AWS WAF to search for in the part of a URL that identifies a resource, for example, /images/daily-ad.jpg.

  • BODY: The part of a request that contains any additional data that you want to send to your web server as the HTTP request body, such as data from a form. The request body immediately follows the request headers. Note that only the first 8192 bytes of the request body are forwarded to AWS WAF for inspection. To allow or block requests based on the length of the body, you can create a size constraint set. For more information, see CreateSizeConstraintSet.

  • SINGLE_QUERY_ARG: The parameter in the query string that you will inspect, such as UserName or SalesRegion. The maximum length for SINGLE_QUERY_ARG is 30 characters.

  • ALL_QUERY_ARGS: Similar to SINGLE_QUERY_ARG, but instead of inspecting a single parameter, AWS WAF inspects all parameters within the query string for the value or regex pattern that you specify in TargetString.

If TargetString includes alphabetic characters A-Z and a-z, note that the value is case sensitive.

If you're using the AWS WAF API

Specify a base64-encoded version of the value. The maximum length of the value before you base64-encode it is 50 bytes.

For example, suppose the value of Type is HEADER and the value of Data is User-Agent. If you want to search the User-Agent header for the value BadBot, you base64-encode BadBot using MIME base64-encoding and include the resulting value, QmFkQm90, in the value of TargetString.

If you're using the AWS CLI or one of the AWS SDKs

The value that you want AWS WAF to search for. The SDK automatically base64 encodes the value.

This field is required.
Source

pub fn set_target_string(self, input: Option<Blob>) -> Self

The value that you want AWS WAF to search for. AWS WAF searches for the specified string in the part of web requests that you specified in FieldToMatch. The maximum length of the value is 50 bytes.

Valid values depend on the values that you specified for FieldToMatch:

  • HEADER: The value that you want AWS WAF to search for in the request header that you specified in FieldToMatch, for example, the value of the User-Agent or Referer header.

  • METHOD: The HTTP method, which indicates the type of operation specified in the request. CloudFront supports the following methods: DELETE, GET, HEAD, OPTIONS, PATCH, POST, and PUT.

  • QUERY_STRING: The value that you want AWS WAF to search for in the query string, which is the part of a URL that appears after a ? character.

  • URI: The value that you want AWS WAF to search for in the part of a URL that identifies a resource, for example, /images/daily-ad.jpg.

  • BODY: The part of a request that contains any additional data that you want to send to your web server as the HTTP request body, such as data from a form. The request body immediately follows the request headers. Note that only the first 8192 bytes of the request body are forwarded to AWS WAF for inspection. To allow or block requests based on the length of the body, you can create a size constraint set. For more information, see CreateSizeConstraintSet.

  • SINGLE_QUERY_ARG: The parameter in the query string that you will inspect, such as UserName or SalesRegion. The maximum length for SINGLE_QUERY_ARG is 30 characters.

  • ALL_QUERY_ARGS: Similar to SINGLE_QUERY_ARG, but instead of inspecting a single parameter, AWS WAF inspects all parameters within the query string for the value or regex pattern that you specify in TargetString.

If TargetString includes alphabetic characters A-Z and a-z, note that the value is case sensitive.

If you're using the AWS WAF API

Specify a base64-encoded version of the value. The maximum length of the value before you base64-encode it is 50 bytes.

For example, suppose the value of Type is HEADER and the value of Data is User-Agent. If you want to search the User-Agent header for the value BadBot, you base64-encode BadBot using MIME base64-encoding and include the resulting value, QmFkQm90, in the value of TargetString.

If you're using the AWS CLI or one of the AWS SDKs

The value that you want AWS WAF to search for. The SDK automatically base64 encodes the value.

Source

pub fn get_target_string(&self) -> &Option<Blob>

The value that you want AWS WAF to search for. AWS WAF searches for the specified string in the part of web requests that you specified in FieldToMatch. The maximum length of the value is 50 bytes.

Valid values depend on the values that you specified for FieldToMatch:

  • HEADER: The value that you want AWS WAF to search for in the request header that you specified in FieldToMatch, for example, the value of the User-Agent or Referer header.

  • METHOD: The HTTP method, which indicates the type of operation specified in the request. CloudFront supports the following methods: DELETE, GET, HEAD, OPTIONS, PATCH, POST, and PUT.

  • QUERY_STRING: The value that you want AWS WAF to search for in the query string, which is the part of a URL that appears after a ? character.

  • URI: The value that you want AWS WAF to search for in the part of a URL that identifies a resource, for example, /images/daily-ad.jpg.

  • BODY: The part of a request that contains any additional data that you want to send to your web server as the HTTP request body, such as data from a form. The request body immediately follows the request headers. Note that only the first 8192 bytes of the request body are forwarded to AWS WAF for inspection. To allow or block requests based on the length of the body, you can create a size constraint set. For more information, see CreateSizeConstraintSet.

  • SINGLE_QUERY_ARG: The parameter in the query string that you will inspect, such as UserName or SalesRegion. The maximum length for SINGLE_QUERY_ARG is 30 characters.

  • ALL_QUERY_ARGS: Similar to SINGLE_QUERY_ARG, but instead of inspecting a single parameter, AWS WAF inspects all parameters within the query string for the value or regex pattern that you specify in TargetString.

If TargetString includes alphabetic characters A-Z and a-z, note that the value is case sensitive.

If you're using the AWS WAF API

Specify a base64-encoded version of the value. The maximum length of the value before you base64-encode it is 50 bytes.

For example, suppose the value of Type is HEADER and the value of Data is User-Agent. If you want to search the User-Agent header for the value BadBot, you base64-encode BadBot using MIME base64-encoding and include the resulting value, QmFkQm90, in the value of TargetString.

If you're using the AWS CLI or one of the AWS SDKs

The value that you want AWS WAF to search for. The SDK automatically base64 encodes the value.

Source

pub fn text_transformation(self, input: TextTransformation) -> Self

Text transformations eliminate some of the unusual formatting that attackers use in web requests in an effort to bypass AWS WAF. If you specify a transformation, AWS WAF performs the transformation on FieldToMatch before inspecting it for a match.

You can only specify a single type of TextTransformation.

CMD_LINE

When you're concerned that attackers are injecting an operating system command line command and using unusual formatting to disguise some or all of the command, use this option to perform the following transformations:

  • Delete the following characters: \ " ' ^

  • Delete spaces before the following characters: / (

  • Replace the following characters with a space: , ;

  • Replace multiple spaces with one space

  • Convert uppercase letters (A-Z) to lowercase (a-z)

COMPRESS_WHITE_SPACE

Use this option to replace the following characters with a space character (decimal 32):

  • \f, formfeed, decimal 12

  • \t, tab, decimal 9

  • \n, newline, decimal 10

  • \r, carriage return, decimal 13

  • \v, vertical tab, decimal 11

  • non-breaking space, decimal 160

COMPRESS_WHITE_SPACE also replaces multiple spaces with one space.

HTML_ENTITY_DECODE

Use this option to replace HTML-encoded characters with unencoded characters. HTML_ENTITY_DECODE performs the following operations:

  • Replaces (ampersand)quot; with "

  • Replaces (ampersand)nbsp; with a non-breaking space, decimal 160

  • Replaces (ampersand)lt; with a "less than" symbol

  • Replaces (ampersand)gt; with >

  • Replaces characters that are represented in hexadecimal format, (ampersand)#xhhhh;, with the corresponding characters

  • Replaces characters that are represented in decimal format, (ampersand)#nnnn;, with the corresponding characters

LOWERCASE

Use this option to convert uppercase letters (A-Z) to lowercase (a-z).

URL_DECODE

Use this option to decode a URL-encoded value.

NONE

Specify NONE if you don't want to perform any text transformations.

This field is required.
Source

pub fn set_text_transformation(self, input: Option<TextTransformation>) -> Self

Text transformations eliminate some of the unusual formatting that attackers use in web requests in an effort to bypass AWS WAF. If you specify a transformation, AWS WAF performs the transformation on FieldToMatch before inspecting it for a match.

You can only specify a single type of TextTransformation.

CMD_LINE

When you're concerned that attackers are injecting an operating system command line command and using unusual formatting to disguise some or all of the command, use this option to perform the following transformations:

  • Delete the following characters: \ " ' ^

  • Delete spaces before the following characters: / (

  • Replace the following characters with a space: , ;

  • Replace multiple spaces with one space

  • Convert uppercase letters (A-Z) to lowercase (a-z)

COMPRESS_WHITE_SPACE

Use this option to replace the following characters with a space character (decimal 32):

  • \f, formfeed, decimal 12

  • \t, tab, decimal 9

  • \n, newline, decimal 10

  • \r, carriage return, decimal 13

  • \v, vertical tab, decimal 11

  • non-breaking space, decimal 160

COMPRESS_WHITE_SPACE also replaces multiple spaces with one space.

HTML_ENTITY_DECODE

Use this option to replace HTML-encoded characters with unencoded characters. HTML_ENTITY_DECODE performs the following operations:

  • Replaces (ampersand)quot; with "

  • Replaces (ampersand)nbsp; with a non-breaking space, decimal 160

  • Replaces (ampersand)lt; with a "less than" symbol

  • Replaces (ampersand)gt; with >

  • Replaces characters that are represented in hexadecimal format, (ampersand)#xhhhh;, with the corresponding characters

  • Replaces characters that are represented in decimal format, (ampersand)#nnnn;, with the corresponding characters

LOWERCASE

Use this option to convert uppercase letters (A-Z) to lowercase (a-z).

URL_DECODE

Use this option to decode a URL-encoded value.

NONE

Specify NONE if you don't want to perform any text transformations.

Source

pub fn get_text_transformation(&self) -> &Option<TextTransformation>

Text transformations eliminate some of the unusual formatting that attackers use in web requests in an effort to bypass AWS WAF. If you specify a transformation, AWS WAF performs the transformation on FieldToMatch before inspecting it for a match.

You can only specify a single type of TextTransformation.

CMD_LINE

When you're concerned that attackers are injecting an operating system command line command and using unusual formatting to disguise some or all of the command, use this option to perform the following transformations:

  • Delete the following characters: \ " ' ^

  • Delete spaces before the following characters: / (

  • Replace the following characters with a space: , ;

  • Replace multiple spaces with one space

  • Convert uppercase letters (A-Z) to lowercase (a-z)

COMPRESS_WHITE_SPACE

Use this option to replace the following characters with a space character (decimal 32):

  • \f, formfeed, decimal 12

  • \t, tab, decimal 9

  • \n, newline, decimal 10

  • \r, carriage return, decimal 13

  • \v, vertical tab, decimal 11

  • non-breaking space, decimal 160

COMPRESS_WHITE_SPACE also replaces multiple spaces with one space.

HTML_ENTITY_DECODE

Use this option to replace HTML-encoded characters with unencoded characters. HTML_ENTITY_DECODE performs the following operations:

  • Replaces (ampersand)quot; with "

  • Replaces (ampersand)nbsp; with a non-breaking space, decimal 160

  • Replaces (ampersand)lt; with a "less than" symbol

  • Replaces (ampersand)gt; with >

  • Replaces characters that are represented in hexadecimal format, (ampersand)#xhhhh;, with the corresponding characters

  • Replaces characters that are represented in decimal format, (ampersand)#nnnn;, with the corresponding characters

LOWERCASE

Use this option to convert uppercase letters (A-Z) to lowercase (a-z).

URL_DECODE

Use this option to decode a URL-encoded value.

NONE

Specify NONE if you don't want to perform any text transformations.

Source

pub fn positional_constraint(self, input: PositionalConstraint) -> Self

Within the portion of a web request that you want to search (for example, in the query string, if any), specify where you want AWS WAF to search. Valid values include the following:

CONTAINS

The specified part of the web request must include the value of TargetString, but the location doesn't matter.

CONTAINS_WORD

The specified part of the web request must include the value of TargetString, and TargetString must contain only alphanumeric characters or underscore (A-Z, a-z, 0-9, or _). In addition, TargetString must be a word, which means one of the following:

  • TargetString exactly matches the value of the specified part of the web request, such as the value of a header.

  • TargetString is at the beginning of the specified part of the web request and is followed by a character other than an alphanumeric character or underscore (_), for example, BadBot;.

  • TargetString is at the end of the specified part of the web request and is preceded by a character other than an alphanumeric character or underscore (_), for example, ;BadBot.

  • TargetString is in the middle of the specified part of the web request and is preceded and followed by characters other than alphanumeric characters or underscore (_), for example, -BadBot;.

EXACTLY

The value of the specified part of the web request must exactly match the value of TargetString.

STARTS_WITH

The value of TargetString must appear at the beginning of the specified part of the web request.

ENDS_WITH

The value of TargetString must appear at the end of the specified part of the web request.

This field is required.
Source

pub fn set_positional_constraint( self, input: Option<PositionalConstraint>, ) -> Self

Within the portion of a web request that you want to search (for example, in the query string, if any), specify where you want AWS WAF to search. Valid values include the following:

CONTAINS

The specified part of the web request must include the value of TargetString, but the location doesn't matter.

CONTAINS_WORD

The specified part of the web request must include the value of TargetString, and TargetString must contain only alphanumeric characters or underscore (A-Z, a-z, 0-9, or _). In addition, TargetString must be a word, which means one of the following:

  • TargetString exactly matches the value of the specified part of the web request, such as the value of a header.

  • TargetString is at the beginning of the specified part of the web request and is followed by a character other than an alphanumeric character or underscore (_), for example, BadBot;.

  • TargetString is at the end of the specified part of the web request and is preceded by a character other than an alphanumeric character or underscore (_), for example, ;BadBot.

  • TargetString is in the middle of the specified part of the web request and is preceded and followed by characters other than alphanumeric characters or underscore (_), for example, -BadBot;.

EXACTLY

The value of the specified part of the web request must exactly match the value of TargetString.

STARTS_WITH

The value of TargetString must appear at the beginning of the specified part of the web request.

ENDS_WITH

The value of TargetString must appear at the end of the specified part of the web request.

Source

pub fn get_positional_constraint(&self) -> &Option<PositionalConstraint>

Within the portion of a web request that you want to search (for example, in the query string, if any), specify where you want AWS WAF to search. Valid values include the following:

CONTAINS

The specified part of the web request must include the value of TargetString, but the location doesn't matter.

CONTAINS_WORD

The specified part of the web request must include the value of TargetString, and TargetString must contain only alphanumeric characters or underscore (A-Z, a-z, 0-9, or _). In addition, TargetString must be a word, which means one of the following:

  • TargetString exactly matches the value of the specified part of the web request, such as the value of a header.

  • TargetString is at the beginning of the specified part of the web request and is followed by a character other than an alphanumeric character or underscore (_), for example, BadBot;.

  • TargetString is at the end of the specified part of the web request and is preceded by a character other than an alphanumeric character or underscore (_), for example, ;BadBot.

  • TargetString is in the middle of the specified part of the web request and is preceded and followed by characters other than alphanumeric characters or underscore (_), for example, -BadBot;.

EXACTLY

The value of the specified part of the web request must exactly match the value of TargetString.

STARTS_WITH

The value of TargetString must appear at the beginning of the specified part of the web request.

ENDS_WITH

The value of TargetString must appear at the end of the specified part of the web request.

Source

pub fn build(self) -> Result<ByteMatchTuple, BuildError>

Consumes the builder and constructs a ByteMatchTuple. This method will fail if any of the following fields are not set:

Trait Implementations§

Source§

impl Clone for ByteMatchTupleBuilder

Source§

fn clone(&self) -> ByteMatchTupleBuilder

Returns a copy of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for ByteMatchTupleBuilder

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Default for ByteMatchTupleBuilder

Source§

fn default() -> ByteMatchTupleBuilder

Returns the “default value” for a type. Read more
Source§

impl PartialEq for ByteMatchTupleBuilder

Source§

fn eq(&self, other: &ByteMatchTupleBuilder) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
Source§

impl StructuralPartialEq for ByteMatchTupleBuilder

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

Source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
Source§

impl<T> Paint for T
where T: ?Sized,

Source§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
Source§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to Color::Primary.

§Example
println!("{}", value.primary());
Source§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to Color::Fixed.

§Example
println!("{}", value.fixed(color));
Source§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to Color::Rgb.

§Example
println!("{}", value.rgb(r, g, b));
Source§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to Color::Black.

§Example
println!("{}", value.black());
Source§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to Color::Red.

§Example
println!("{}", value.red());
Source§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to Color::Green.

§Example
println!("{}", value.green());
Source§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to Color::Yellow.

§Example
println!("{}", value.yellow());
Source§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to Color::Blue.

§Example
println!("{}", value.blue());
Source§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to Color::Magenta.

§Example
println!("{}", value.magenta());
Source§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to Color::Cyan.

§Example
println!("{}", value.cyan());
Source§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to Color::White.

§Example
println!("{}", value.white());
Source§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightBlack.

§Example
println!("{}", value.bright_black());
Source§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightRed.

§Example
println!("{}", value.bright_red());
Source§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightGreen.

§Example
println!("{}", value.bright_green());
Source§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightYellow.

§Example
println!("{}", value.bright_yellow());
Source§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightBlue.

§Example
println!("{}", value.bright_blue());
Source§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightMagenta.

§Example
println!("{}", value.bright_magenta());
Source§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightCyan.

§Example
println!("{}", value.bright_cyan());
Source§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightWhite.

§Example
println!("{}", value.bright_white());
Source§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
Source§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to Color::Primary.

§Example
println!("{}", value.on_primary());
Source§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to Color::Fixed.

§Example
println!("{}", value.on_fixed(color));
Source§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to Color::Rgb.

§Example
println!("{}", value.on_rgb(r, g, b));
Source§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to Color::Black.

§Example
println!("{}", value.on_black());
Source§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to Color::Red.

§Example
println!("{}", value.on_red());
Source§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to Color::Green.

§Example
println!("{}", value.on_green());
Source§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to Color::Yellow.

§Example
println!("{}", value.on_yellow());
Source§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to Color::Blue.

§Example
println!("{}", value.on_blue());
Source§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to Color::Magenta.

§Example
println!("{}", value.on_magenta());
Source§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to Color::Cyan.

§Example
println!("{}", value.on_cyan());
Source§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to Color::White.

§Example
println!("{}", value.on_white());
Source§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightBlack.

§Example
println!("{}", value.on_bright_black());
Source§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightRed.

§Example
println!("{}", value.on_bright_red());
Source§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightGreen.

§Example
println!("{}", value.on_bright_green());
Source§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightYellow.

§Example
println!("{}", value.on_bright_yellow());
Source§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightBlue.

§Example
println!("{}", value.on_bright_blue());
Source§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightMagenta.

§Example
println!("{}", value.on_bright_magenta());
Source§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightCyan.

§Example
println!("{}", value.on_bright_cyan());
Source§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightWhite.

§Example
println!("{}", value.on_bright_white());
Source§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
Source§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Bold.

§Example
println!("{}", value.bold());
Source§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Dim.

§Example
println!("{}", value.dim());
Source§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Italic.

§Example
println!("{}", value.italic());
Source§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Underline.

§Example
println!("{}", value.underline());

Returns self with the attr() set to Attribute::Blink.

§Example
println!("{}", value.blink());

Returns self with the attr() set to Attribute::RapidBlink.

§Example
println!("{}", value.rapid_blink());
Source§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Invert.

§Example
println!("{}", value.invert());
Source§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Conceal.

§Example
println!("{}", value.conceal());
Source§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Strike.

§Example
println!("{}", value.strike());
Source§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
Source§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Mask.

§Example
println!("{}", value.mask());
Source§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Wrap.

§Example
println!("{}", value.wrap());
Source§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Linger.

§Example
println!("{}", value.linger());
Source§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to Quirk::Clear.

§Example
println!("{}", value.clear());
Source§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Resetting.

§Example
println!("{}", value.resetting());
Source§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Bright.

§Example
println!("{}", value.bright());
Source§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::OnBright.

§Example
println!("{}", value.on_bright());
Source§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
Source§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more
Source§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

impl<T> ErasedDestructor for T
where T: 'static,

Source§

impl<T> MaybeSendSync for T