pub struct CreateWebACLMigrationStackFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to CreateWebACLMigrationStack.
Creates an AWS CloudFormation WAFV2 template for the specified web ACL in the specified Amazon S3 bucket. Then, in CloudFormation, you create a stack from the template, to create the web ACL and its resources in AWS WAFV2. Use this to migrate your AWS WAF Classic web ACL to the latest version of AWS WAF.
This is part of a larger migration procedure for web ACLs from AWS WAF Classic to the latest version of AWS WAF. For the full procedure, including caveats and manual steps to complete the migration and switch over to the new web ACL, see Migrating your AWS WAF Classic resources to AWS WAF in the AWS WAF Developer Guide.
Implementations§
Source§impl CreateWebACLMigrationStackFluentBuilder
impl CreateWebACLMigrationStackFluentBuilder
Sourcepub fn as_input(&self) -> &CreateWebAclMigrationStackInputBuilder
pub fn as_input(&self) -> &CreateWebAclMigrationStackInputBuilder
Access the CreateWebACLMigrationStack as a reference.
Sourcepub async fn send(
self,
) -> Result<CreateWebAclMigrationStackOutput, SdkError<CreateWebACLMigrationStackError, HttpResponse>>
pub async fn send( self, ) -> Result<CreateWebAclMigrationStackOutput, SdkError<CreateWebACLMigrationStackError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<CreateWebAclMigrationStackOutput, CreateWebACLMigrationStackError, Self>
pub fn customize( self, ) -> CustomizableOperation<CreateWebAclMigrationStackOutput, CreateWebACLMigrationStackError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn web_acl_id(self, input: impl Into<String>) -> Self
pub fn web_acl_id(self, input: impl Into<String>) -> Self
The UUID of the WAF Classic web ACL that you want to migrate to WAF v2.
Sourcepub fn set_web_acl_id(self, input: Option<String>) -> Self
pub fn set_web_acl_id(self, input: Option<String>) -> Self
The UUID of the WAF Classic web ACL that you want to migrate to WAF v2.
Sourcepub fn get_web_acl_id(&self) -> &Option<String>
pub fn get_web_acl_id(&self) -> &Option<String>
The UUID of the WAF Classic web ACL that you want to migrate to WAF v2.
Sourcepub fn s3_bucket_name(self, input: impl Into<String>) -> Self
pub fn s3_bucket_name(self, input: impl Into<String>) -> Self
The name of the Amazon S3 bucket to store the CloudFormation template in. The S3 bucket must be configured as follows for the migration:
-
The bucket name must start with
aws-waf-migration-. For example,aws-waf-migration-my-web-acl. -
The bucket must be in the Region where you are deploying the template. For example, for a web ACL in us-west-2, you must use an Amazon S3 bucket in us-west-2 and you must deploy the template stack to us-west-2.
-
The bucket policies must permit the migration process to write data. For listings of the bucket policies, see the Examples section.
Sourcepub fn set_s3_bucket_name(self, input: Option<String>) -> Self
pub fn set_s3_bucket_name(self, input: Option<String>) -> Self
The name of the Amazon S3 bucket to store the CloudFormation template in. The S3 bucket must be configured as follows for the migration:
-
The bucket name must start with
aws-waf-migration-. For example,aws-waf-migration-my-web-acl. -
The bucket must be in the Region where you are deploying the template. For example, for a web ACL in us-west-2, you must use an Amazon S3 bucket in us-west-2 and you must deploy the template stack to us-west-2.
-
The bucket policies must permit the migration process to write data. For listings of the bucket policies, see the Examples section.
Sourcepub fn get_s3_bucket_name(&self) -> &Option<String>
pub fn get_s3_bucket_name(&self) -> &Option<String>
The name of the Amazon S3 bucket to store the CloudFormation template in. The S3 bucket must be configured as follows for the migration:
-
The bucket name must start with
aws-waf-migration-. For example,aws-waf-migration-my-web-acl. -
The bucket must be in the Region where you are deploying the template. For example, for a web ACL in us-west-2, you must use an Amazon S3 bucket in us-west-2 and you must deploy the template stack to us-west-2.
-
The bucket policies must permit the migration process to write data. For listings of the bucket policies, see the Examples section.
Sourcepub fn ignore_unsupported_type(self, input: bool) -> Self
pub fn ignore_unsupported_type(self, input: bool) -> Self
Indicates whether to exclude entities that can't be migrated or to stop the migration. Set this to true to ignore unsupported entities in the web ACL during the migration. Otherwise, if AWS WAF encounters unsupported entities, it stops the process and throws an exception.
Sourcepub fn set_ignore_unsupported_type(self, input: Option<bool>) -> Self
pub fn set_ignore_unsupported_type(self, input: Option<bool>) -> Self
Indicates whether to exclude entities that can't be migrated or to stop the migration. Set this to true to ignore unsupported entities in the web ACL during the migration. Otherwise, if AWS WAF encounters unsupported entities, it stops the process and throws an exception.
Sourcepub fn get_ignore_unsupported_type(&self) -> &Option<bool>
pub fn get_ignore_unsupported_type(&self) -> &Option<bool>
Indicates whether to exclude entities that can't be migrated or to stop the migration. Set this to true to ignore unsupported entities in the web ACL during the migration. Otherwise, if AWS WAF encounters unsupported entities, it stops the process and throws an exception.
Trait Implementations§
Source§impl Clone for CreateWebACLMigrationStackFluentBuilder
impl Clone for CreateWebACLMigrationStackFluentBuilder
Source§fn clone(&self) -> CreateWebACLMigrationStackFluentBuilder
fn clone(&self) -> CreateWebACLMigrationStackFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for CreateWebACLMigrationStackFluentBuilder
impl !RefUnwindSafe for CreateWebACLMigrationStackFluentBuilder
impl Send for CreateWebACLMigrationStackFluentBuilder
impl Sync for CreateWebACLMigrationStackFluentBuilder
impl Unpin for CreateWebACLMigrationStackFluentBuilder
impl !UnwindSafe for CreateWebACLMigrationStackFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§unsafe fn clone_to_uninit(&self, dst: *mut T)
unsafe fn clone_to_uninit(&self, dst: *mut T)
clone_to_uninit)Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);