pub struct UpdateIPSetFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to UpdateIPSet.
This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Inserts or deletes IPSetDescriptor objects in an IPSet. For each IPSetDescriptor object, you specify the following values:
-
Whether to insert or delete the object from the array. If you want to change an
IPSetDescriptorobject, you delete the existing object and add a new one. -
The IP address version,
IPv4orIPv6. -
The IP address in CIDR notation, for example,
192.0.2.0/24(for the range of IP addresses from192.0.2.0to192.0.2.255) or192.0.2.44/32(for the individual IP address192.0.2.44).
AWS WAF supports IPv4 address ranges: /8 and any range between /16 through /32. AWS WAF supports IPv6 address ranges: /24, /32, /48, /56, /64, and /128. For more information about CIDR notation, see the Wikipedia entry Classless Inter-Domain Routing.
IPv6 addresses can be represented using any of the following formats:
-
1111:0000:0000:0000:0000:0000:0000:0111/128
-
1111:0:0:0:0:0:0:0111/128
-
1111::0111/128
-
1111::111/128
You use an IPSet to specify which web requests you want to allow or block based on the IP addresses that the requests originated from. For example, if you're receiving a lot of requests from one or a small number of IP addresses and you want to block the requests, you can create an IPSet that specifies those IP addresses, and then configure AWS WAF to block the requests.
To create and configure an IPSet, perform the following steps:
-
Submit a
CreateIPSetrequest. -
Use
GetChangeTokento get the change token that you provide in theChangeTokenparameter of anUpdateIPSetrequest. -
Submit an
UpdateIPSetrequest to specify the IP addresses that you want AWS WAF to watch for.
When you update an IPSet, you specify the IP addresses that you want to add and/or the IP addresses that you want to delete. If you want to change an IP address, you delete the existing IP address and add the new one.
You can insert a maximum of 1000 addresses in a single request.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
Implementations§
Source§impl UpdateIPSetFluentBuilder
impl UpdateIPSetFluentBuilder
Sourcepub fn as_input(&self) -> &UpdateIpSetInputBuilder
pub fn as_input(&self) -> &UpdateIpSetInputBuilder
Access the UpdateIPSet as a reference.
Sourcepub async fn send(
self,
) -> Result<UpdateIpSetOutput, SdkError<UpdateIPSetError, HttpResponse>>
pub async fn send( self, ) -> Result<UpdateIpSetOutput, SdkError<UpdateIPSetError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<UpdateIpSetOutput, UpdateIPSetError, Self>
pub fn customize( self, ) -> CustomizableOperation<UpdateIpSetOutput, UpdateIPSetError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn ip_set_id(self, input: impl Into<String>) -> Self
pub fn ip_set_id(self, input: impl Into<String>) -> Self
The IPSetId of the IPSet that you want to update. IPSetId is returned by CreateIPSet and by ListIPSets.
Sourcepub fn set_ip_set_id(self, input: Option<String>) -> Self
pub fn set_ip_set_id(self, input: Option<String>) -> Self
The IPSetId of the IPSet that you want to update. IPSetId is returned by CreateIPSet and by ListIPSets.
Sourcepub fn get_ip_set_id(&self) -> &Option<String>
pub fn get_ip_set_id(&self) -> &Option<String>
The IPSetId of the IPSet that you want to update. IPSetId is returned by CreateIPSet and by ListIPSets.
Sourcepub fn change_token(self, input: impl Into<String>) -> Self
pub fn change_token(self, input: impl Into<String>) -> Self
The value returned by the most recent call to GetChangeToken.
Sourcepub fn set_change_token(self, input: Option<String>) -> Self
pub fn set_change_token(self, input: Option<String>) -> Self
The value returned by the most recent call to GetChangeToken.
Sourcepub fn get_change_token(&self) -> &Option<String>
pub fn get_change_token(&self) -> &Option<String>
The value returned by the most recent call to GetChangeToken.
Sourcepub fn updates(self, input: IpSetUpdate) -> Self
pub fn updates(self, input: IpSetUpdate) -> Self
Appends an item to Updates.
To override the contents of this collection use set_updates.
An array of IPSetUpdate objects that you want to insert into or delete from an IPSet. For more information, see the applicable data types:
-
IPSetUpdate: ContainsActionandIPSetDescriptor -
IPSetDescriptor: ContainsTypeandValue
You can insert a maximum of 1000 addresses in a single request.
Sourcepub fn set_updates(self, input: Option<Vec<IpSetUpdate>>) -> Self
pub fn set_updates(self, input: Option<Vec<IpSetUpdate>>) -> Self
An array of IPSetUpdate objects that you want to insert into or delete from an IPSet. For more information, see the applicable data types:
-
IPSetUpdate: ContainsActionandIPSetDescriptor -
IPSetDescriptor: ContainsTypeandValue
You can insert a maximum of 1000 addresses in a single request.
Sourcepub fn get_updates(&self) -> &Option<Vec<IpSetUpdate>>
pub fn get_updates(&self) -> &Option<Vec<IpSetUpdate>>
An array of IPSetUpdate objects that you want to insert into or delete from an IPSet. For more information, see the applicable data types:
-
IPSetUpdate: ContainsActionandIPSetDescriptor -
IPSetDescriptor: ContainsTypeandValue
You can insert a maximum of 1000 addresses in a single request.
Trait Implementations§
Source§impl Clone for UpdateIPSetFluentBuilder
impl Clone for UpdateIPSetFluentBuilder
Source§fn clone(&self) -> UpdateIPSetFluentBuilder
fn clone(&self) -> UpdateIPSetFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for UpdateIPSetFluentBuilder
impl !RefUnwindSafe for UpdateIPSetFluentBuilder
impl Send for UpdateIPSetFluentBuilder
impl Sync for UpdateIPSetFluentBuilder
impl Unpin for UpdateIPSetFluentBuilder
impl !UnwindSafe for UpdateIPSetFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§unsafe fn clone_to_uninit(&self, dst: *mut T)
unsafe fn clone_to_uninit(&self, dst: *mut T)
clone_to_uninit)Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);