pub struct UpdateRateBasedRuleFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to UpdateRateBasedRule.
This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Inserts or deletes Predicate objects in a rule and updates the RateLimit in the rule.
Each Predicate object identifies a predicate, such as a ByteMatchSet or an IPSet, that specifies the web requests that you want to block or count. The RateLimit specifies the number of requests every five minutes that triggers the rule.
If you add more than one predicate to a RateBasedRule, a request must match all the predicates and exceed the RateLimit to be counted or blocked. For example, suppose you add the following to a RateBasedRule:
-
An
IPSetthat matches the IP address192.0.2.44/32 -
A
ByteMatchSetthat matchesBadBotin theUser-Agentheader
Further, you specify a RateLimit of 1,000.
You then add the RateBasedRule to a WebACL and specify that you want to block requests that satisfy the rule. For a request to be blocked, it must come from the IP address 192.0.2.44 and the User-Agent header in the request must contain the value BadBot. Further, requests that match these two conditions much be received at a rate of more than 1,000 every five minutes. If the rate drops below this limit, AWS WAF no longer blocks the requests.
As a second example, suppose you want to limit requests to a particular page on your site. To do this, you could add the following to a RateBasedRule:
-
A
ByteMatchSetwithFieldToMatchofURI -
A
PositionalConstraintofSTARTS_WITH -
A
TargetStringoflogin
Further, you specify a RateLimit of 1,000.
By adding this RateBasedRule to a WebACL, you could limit requests to your login page without affecting the rest of your site.
Implementations§
Source§impl UpdateRateBasedRuleFluentBuilder
impl UpdateRateBasedRuleFluentBuilder
Sourcepub fn as_input(&self) -> &UpdateRateBasedRuleInputBuilder
pub fn as_input(&self) -> &UpdateRateBasedRuleInputBuilder
Access the UpdateRateBasedRule as a reference.
Sourcepub async fn send(
self,
) -> Result<UpdateRateBasedRuleOutput, SdkError<UpdateRateBasedRuleError, HttpResponse>>
pub async fn send( self, ) -> Result<UpdateRateBasedRuleOutput, SdkError<UpdateRateBasedRuleError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<UpdateRateBasedRuleOutput, UpdateRateBasedRuleError, Self>
pub fn customize( self, ) -> CustomizableOperation<UpdateRateBasedRuleOutput, UpdateRateBasedRuleError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn rule_id(self, input: impl Into<String>) -> Self
pub fn rule_id(self, input: impl Into<String>) -> Self
The RuleId of the RateBasedRule that you want to update. RuleId is returned by CreateRateBasedRule and by ListRateBasedRules.
Sourcepub fn set_rule_id(self, input: Option<String>) -> Self
pub fn set_rule_id(self, input: Option<String>) -> Self
The RuleId of the RateBasedRule that you want to update. RuleId is returned by CreateRateBasedRule and by ListRateBasedRules.
Sourcepub fn get_rule_id(&self) -> &Option<String>
pub fn get_rule_id(&self) -> &Option<String>
The RuleId of the RateBasedRule that you want to update. RuleId is returned by CreateRateBasedRule and by ListRateBasedRules.
Sourcepub fn change_token(self, input: impl Into<String>) -> Self
pub fn change_token(self, input: impl Into<String>) -> Self
The value returned by the most recent call to GetChangeToken.
Sourcepub fn set_change_token(self, input: Option<String>) -> Self
pub fn set_change_token(self, input: Option<String>) -> Self
The value returned by the most recent call to GetChangeToken.
Sourcepub fn get_change_token(&self) -> &Option<String>
pub fn get_change_token(&self) -> &Option<String>
The value returned by the most recent call to GetChangeToken.
Sourcepub fn updates(self, input: RuleUpdate) -> Self
pub fn updates(self, input: RuleUpdate) -> Self
Appends an item to Updates.
To override the contents of this collection use set_updates.
An array of RuleUpdate objects that you want to insert into or delete from a RateBasedRule.
Sourcepub fn set_updates(self, input: Option<Vec<RuleUpdate>>) -> Self
pub fn set_updates(self, input: Option<Vec<RuleUpdate>>) -> Self
An array of RuleUpdate objects that you want to insert into or delete from a RateBasedRule.
Sourcepub fn get_updates(&self) -> &Option<Vec<RuleUpdate>>
pub fn get_updates(&self) -> &Option<Vec<RuleUpdate>>
An array of RuleUpdate objects that you want to insert into or delete from a RateBasedRule.
Sourcepub fn rate_limit(self, input: i64) -> Self
pub fn rate_limit(self, input: i64) -> Self
The maximum number of requests, which have an identical value in the field specified by the RateKey, allowed in a five-minute period. If the number of requests exceeds the RateLimit and the other predicates specified in the rule are also met, AWS WAF triggers the action that is specified for this rule.
Sourcepub fn set_rate_limit(self, input: Option<i64>) -> Self
pub fn set_rate_limit(self, input: Option<i64>) -> Self
The maximum number of requests, which have an identical value in the field specified by the RateKey, allowed in a five-minute period. If the number of requests exceeds the RateLimit and the other predicates specified in the rule are also met, AWS WAF triggers the action that is specified for this rule.
Sourcepub fn get_rate_limit(&self) -> &Option<i64>
pub fn get_rate_limit(&self) -> &Option<i64>
The maximum number of requests, which have an identical value in the field specified by the RateKey, allowed in a five-minute period. If the number of requests exceeds the RateLimit and the other predicates specified in the rule are also met, AWS WAF triggers the action that is specified for this rule.
Trait Implementations§
Source§impl Clone for UpdateRateBasedRuleFluentBuilder
impl Clone for UpdateRateBasedRuleFluentBuilder
Source§fn clone(&self) -> UpdateRateBasedRuleFluentBuilder
fn clone(&self) -> UpdateRateBasedRuleFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for UpdateRateBasedRuleFluentBuilder
impl !RefUnwindSafe for UpdateRateBasedRuleFluentBuilder
impl Send for UpdateRateBasedRuleFluentBuilder
impl Sync for UpdateRateBasedRuleFluentBuilder
impl Unpin for UpdateRateBasedRuleFluentBuilder
impl !UnwindSafe for UpdateRateBasedRuleFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§unsafe fn clone_to_uninit(&self, dst: *mut T)
unsafe fn clone_to_uninit(&self, dst: *mut T)
clone_to_uninit)Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);