Struct ActivatedRule

#[non_exhaustive]
pub struct ActivatedRule {
    pub priority: i32,
    pub rule_id: String,
    pub action: Option<WafAction>,
    pub override_action: Option<WafOverrideAction>,
    pub type: Option<WafRuleType>,
    pub excluded_rules: Option<Vec<ExcludedRule>>,
}

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.

For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

The ActivatedRule object in an UpdateWebACL request specifies a Rule that you want to insert or delete, the priority of the Rule in the WebACL, and the action that you want AWS WAF to take when a web request matches the Rule (ALLOW, BLOCK, or COUNT).

To specify whether to insert or delete a Rule, use the Action parameter in the WebACLUpdate data type.

Fields (Non-exhaustive)

Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.

priority: i32

Specifies the order in which the Rules in a WebACL are evaluated. Rules with a lower value for Priority are evaluated before Rules with a higher value. The value must be a unique integer. If you add multiple Rules to a WebACL, the values don't need to be consecutive.

rule_id: String

The RuleId for a Rule. You use RuleId to get more information about a Rule (see GetRule), update a Rule (see UpdateRule), insert a Rule into a WebACL or delete a one from a WebACL (see UpdateWebACL), or delete a Rule from AWS WAF (see DeleteRule).

RuleId is returned by CreateRule and by ListRules.

action: Option<WafAction>

Specifies the action that CloudFront or AWS WAF takes when a web request matches the conditions in the Rule. Valid values for Action include the following:

• ALLOW: CloudFront responds with the requested object.

• BLOCK: CloudFront responds with an HTTP 403 (Forbidden) status code.

• COUNT: AWS WAF increments a counter of requests that match the conditions in the rule and then continues to inspect the web request based on the remaining rules in the web ACL.

ActivatedRule|OverrideAction applies only when updating or adding a RuleGroup to a WebACL. In this case, you do not use ActivatedRule|Action. For all other update requests, ActivatedRule|Action is used instead of ActivatedRule|OverrideAction.

override_action: Option<WafOverrideAction>

Use the OverrideAction to test your RuleGroup.

Any rule in a RuleGroup can potentially block a request. If you set the OverrideAction to None, the RuleGroup will block a request if any individual rule in the RuleGroup matches the request and is configured to block that request. However if you first want to test the RuleGroup, set the OverrideAction to Count. The RuleGroup will then override any block action specified by individual rules contained within the group. Instead of blocking matching requests, those requests will be counted. You can view a record of counted requests using GetSampledRequests.

ActivatedRule|OverrideAction applies only when updating or adding a RuleGroup to a WebACL. In this case you do not use ActivatedRule|Action. For all other update requests, ActivatedRule|Action is used instead of ActivatedRule|OverrideAction.

type: Option<WafRuleType>

The rule type, either REGULAR, as defined by Rule, RATE_BASED, as defined by RateBasedRule, or GROUP, as defined by RuleGroup. The default is REGULAR. Although this field is optional, be aware that if you try to add a RATE_BASED rule to a web ACL without setting the type, the UpdateWebACL request will fail because the request tries to add a REGULAR rule with the specified ID, which does not exist.

excluded_rules: Option<Vec<ExcludedRule>>

An array of rules to exclude from a rule group. This is applicable only when the ActivatedRule refers to a RuleGroup.

Sometimes it is necessary to troubleshoot rule groups that are blocking traffic unexpectedly (false positives). One troubleshooting technique is to identify the specific rule within the rule group that is blocking the legitimate traffic and then disable (exclude) that particular rule. You can exclude rules from both your own rule groups and AWS Marketplace rule groups that have been associated with a web ACL.

Specifying ExcludedRules does not remove those rules from the rule group. Rather, it changes the action for the rules to COUNT. Therefore, requests that match an ExcludedRule are counted but not blocked. The RuleGroup owner will receive COUNT metrics for each ExcludedRule.

If you want to exclude rules from a rule group that is already associated with a web ACL, perform the following steps:

1. Use the AWS WAF logs to identify the IDs of the rules that you want to exclude. For more information about the logs, see Logging Web ACL Traffic Information.

2. Submit an UpdateWebACL request that has two actions:

   • The first action deletes the existing rule group from the web ACL. That is, in the UpdateWebACL request, the first Updates:Action should be DELETE and Updates:ActivatedRule:RuleId should be the rule group that contains the rules that you want to exclude.

   • The second action inserts the same rule group back in, but specifying the rules to exclude. That is, the second Updates:Action should be INSERT, Updates:ActivatedRule:RuleId should be the rule group that you just removed, and ExcludedRules should contain the rules that you want to exclude.

Implementations

impl ActivatedRule

pub fn priority(&self) -> i32

Specifies the order in which the Rules in a WebACL are evaluated. Rules with a lower value for Priority are evaluated before Rules with a higher value. The value must be a unique integer. If you add multiple Rules to a WebACL, the values don't need to be consecutive.

pub fn rule_id(&self) -> &str

The RuleId for a Rule. You use RuleId to get more information about a Rule (see GetRule), update a Rule (see UpdateRule), insert a Rule into a WebACL or delete a one from a WebACL (see UpdateWebACL), or delete a Rule from AWS WAF (see DeleteRule).

RuleId is returned by CreateRule and by ListRules.

pub fn action(&self) -> Option<&WafAction>

Specifies the action that CloudFront or AWS WAF takes when a web request matches the conditions in the Rule. Valid values for Action include the following:

• ALLOW: CloudFront responds with the requested object.

• BLOCK: CloudFront responds with an HTTP 403 (Forbidden) status code.

• COUNT: AWS WAF increments a counter of requests that match the conditions in the rule and then continues to inspect the web request based on the remaining rules in the web ACL.

ActivatedRule|OverrideAction applies only when updating or adding a RuleGroup to a WebACL. In this case, you do not use ActivatedRule|Action. For all other update requests, ActivatedRule|Action is used instead of ActivatedRule|OverrideAction.

pub fn override_action(&self) -> Option<&WafOverrideAction>

Use the OverrideAction to test your RuleGroup.

Any rule in a RuleGroup can potentially block a request. If you set the OverrideAction to None, the RuleGroup will block a request if any individual rule in the RuleGroup matches the request and is configured to block that request. However if you first want to test the RuleGroup, set the OverrideAction to Count. The RuleGroup will then override any block action specified by individual rules contained within the group. Instead of blocking matching requests, those requests will be counted. You can view a record of counted requests using GetSampledRequests.

ActivatedRule|OverrideAction applies only when updating or adding a RuleGroup to a WebACL. In this case you do not use ActivatedRule|Action. For all other update requests, ActivatedRule|Action is used instead of ActivatedRule|OverrideAction.

pub fn type(&self) -> Option<&WafRuleType>

The rule type, either REGULAR, as defined by Rule, RATE_BASED, as defined by RateBasedRule, or GROUP, as defined by RuleGroup. The default is REGULAR. Although this field is optional, be aware that if you try to add a RATE_BASED rule to a web ACL without setting the type, the UpdateWebACL request will fail because the request tries to add a REGULAR rule with the specified ID, which does not exist.

pub fn excluded_rules(&self) -> &[ExcludedRule]

An array of rules to exclude from a rule group. This is applicable only when the ActivatedRule refers to a RuleGroup.

Sometimes it is necessary to troubleshoot rule groups that are blocking traffic unexpectedly (false positives). One troubleshooting technique is to identify the specific rule within the rule group that is blocking the legitimate traffic and then disable (exclude) that particular rule. You can exclude rules from both your own rule groups and AWS Marketplace rule groups that have been associated with a web ACL.

Specifying ExcludedRules does not remove those rules from the rule group. Rather, it changes the action for the rules to COUNT. Therefore, requests that match an ExcludedRule are counted but not blocked. The RuleGroup owner will receive COUNT metrics for each ExcludedRule.

If you want to exclude rules from a rule group that is already associated with a web ACL, perform the following steps:

1. Use the AWS WAF logs to identify the IDs of the rules that you want to exclude. For more information about the logs, see Logging Web ACL Traffic Information.

2. Submit an UpdateWebACL request that has two actions:

   • The first action deletes the existing rule group from the web ACL. That is, in the UpdateWebACL request, the first Updates:Action should be DELETE and Updates:ActivatedRule:RuleId should be the rule group that contains the rules that you want to exclude.

   • The second action inserts the same rule group back in, but specifying the rules to exclude. That is, the second Updates:Action should be INSERT, Updates:ActivatedRule:RuleId should be the rule group that you just removed, and ExcludedRules should contain the rules that you want to exclude.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .excluded_rules.is_none().

impl ActivatedRule

pub fn builder() -> ActivatedRuleBuilder

Creates a new builder-style object to manufacture ActivatedRule.

Trait Implementations

impl Clone for ActivatedRule

fn clone(&self) -> ActivatedRule

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for ActivatedRule

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq for ActivatedRule

fn eq(&self, other: &ActivatedRule) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for ActivatedRule