aws_sdk_wafv2::operation::create_web_acl::builders

Struct CreateWebAclInputBuilder

#[non_exhaustive]
pub struct CreateWebAclInputBuilder { /* private fields */ }

Expand description

A builder for CreateWebAclInput.

Implementations§

Source §

impl CreateWebAclInputBuilder

Source

pub fn name(self, input: impl Into<String>) -> Self

The name of the web ACL. You cannot change the name of a web ACL after you create it.

This field is required.

Source

pub fn set_name(self, input: Option<String>) -> Self

The name of the web ACL. You cannot change the name of a web ACL after you create it.

Source

pub fn get_name(&self) -> &Option<String>

The name of the web ACL. You cannot change the name of a web ACL after you create it.

Source

pub fn scope(self, input: Scope) -> Self

Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, an App Runner service, or an Amazon Web Services Verified Access instance.

To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:

CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.
API and SDKs - For all calls, use the Region endpoint us-east-1.

This field is required.

Source

pub fn set_scope(self, input: Option<Scope>) -> Self

Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, an App Runner service, or an Amazon Web Services Verified Access instance.

To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:

CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.
API and SDKs - For all calls, use the Region endpoint us-east-1.

Source

pub fn get_scope(&self) -> &Option<Scope>

Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, an App Runner service, or an Amazon Web Services Verified Access instance.

To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:

CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.
API and SDKs - For all calls, use the Region endpoint us-east-1.

Source

pub fn default_action(self, input: DefaultAction) -> Self

The action to perform if none of the Rules contained in the WebACL match.

This field is required.

Source

pub fn set_default_action(self, input: Option<DefaultAction>) -> Self

The action to perform if none of the Rules contained in the WebACL match.

Source

pub fn get_default_action(&self) -> &Option<DefaultAction>

The action to perform if none of the Rules contained in the WebACL match.

Source

pub fn description(self, input: impl Into<String>) -> Self

A description of the web ACL that helps with identification.

Source

pub fn set_description(self, input: Option<String>) -> Self

A description of the web ACL that helps with identification.

Source

pub fn get_description(&self) -> &Option<String>

A description of the web ACL that helps with identification.

Source

pub fn rules(self, input: Rule) -> Self

Appends an item to rules.

To override the contents of this collection use set_rules.

The Rule statements used to identify the web requests that you want to manage. Each rule includes one top-level statement that WAF uses to identify matching web requests, and parameters that govern how WAF handles them.

Source

pub fn set_rules(self, input: Option<Vec<Rule>>) -> Self

The Rule statements used to identify the web requests that you want to manage. Each rule includes one top-level statement that WAF uses to identify matching web requests, and parameters that govern how WAF handles them.

Source

pub fn get_rules(&self) -> &Option<Vec<Rule>>

The Rule statements used to identify the web requests that you want to manage. Each rule includes one top-level statement that WAF uses to identify matching web requests, and parameters that govern how WAF handles them.

Source

pub fn visibility_config(self, input: VisibilityConfig) -> Self

Defines and enables Amazon CloudWatch metrics and web request sample collection.

This field is required.

Source

pub fn set_visibility_config(self, input: Option<VisibilityConfig>) -> Self

Defines and enables Amazon CloudWatch metrics and web request sample collection.

Source

pub fn get_visibility_config(&self) -> &Option<VisibilityConfig>

Defines and enables Amazon CloudWatch metrics and web request sample collection.

Source

pub fn tags(self, input: Tag) -> Self

Appends an item to tags.

To override the contents of this collection use set_tags.

An array of key:value pairs to associate with the resource.

Source

pub fn set_tags(self, input: Option<Vec<Tag>>) -> Self

An array of key:value pairs to associate with the resource.

Source

pub fn get_tags(&self) -> &Option<Vec<Tag>>

An array of key:value pairs to associate with the resource.

Source

pub fn custom_response_bodies( self, k: impl Into<String>, v: CustomResponseBody, ) -> Self

Adds a key-value pair to custom_response_bodies.

To override the contents of this collection use set_custom_response_bodies.

A map of custom response keys and content bodies. When you create a rule with a block action, you can send a custom response to the web request. You define these for the web ACL, and then use them in the rules and default actions that you define in the web ACL.

For information about customizing web requests and responses, see Customizing web requests and responses in WAF in the WAF Developer Guide.

For information about the limits on count and size for custom request and response settings, see WAF quotas in the WAF Developer Guide.

Source

pub fn set_custom_response_bodies( self, input: Option<HashMap<String, CustomResponseBody>>, ) -> Self

A map of custom response keys and content bodies. When you create a rule with a block action, you can send a custom response to the web request. You define these for the web ACL, and then use them in the rules and default actions that you define in the web ACL.

For information about customizing web requests and responses, see Customizing web requests and responses in WAF in the WAF Developer Guide.

For information about the limits on count and size for custom request and response settings, see WAF quotas in the WAF Developer Guide.

Source

pub fn get_custom_response_bodies( &self, ) -> &Option<HashMap<String, CustomResponseBody>>

A map of custom response keys and content bodies. When you create a rule with a block action, you can send a custom response to the web request. You define these for the web ACL, and then use them in the rules and default actions that you define in the web ACL.

For information about customizing web requests and responses, see Customizing web requests and responses in WAF in the WAF Developer Guide.

For information about the limits on count and size for custom request and response settings, see WAF quotas in the WAF Developer Guide.

Source

pub fn captcha_config(self, input: CaptchaConfig) -> Self

Specifies how WAF should handle CAPTCHA evaluations for rules that don't have their own CaptchaConfig settings. If you don't specify this, WAF uses its default settings for CaptchaConfig.

Source

pub fn set_captcha_config(self, input: Option<CaptchaConfig>) -> Self

Specifies how WAF should handle CAPTCHA evaluations for rules that don't have their own CaptchaConfig settings. If you don't specify this, WAF uses its default settings for CaptchaConfig.

Source

pub fn get_captcha_config(&self) -> &Option<CaptchaConfig>

Specifies how WAF should handle CAPTCHA evaluations for rules that don't have their own CaptchaConfig settings. If you don't specify this, WAF uses its default settings for CaptchaConfig.

Source

pub fn challenge_config(self, input: ChallengeConfig) -> Self

Specifies how WAF should handle challenge evaluations for rules that don't have their own ChallengeConfig settings. If you don't specify this, WAF uses its default settings for ChallengeConfig.

Source

pub fn set_challenge_config(self, input: Option<ChallengeConfig>) -> Self

Specifies how WAF should handle challenge evaluations for rules that don't have their own ChallengeConfig settings. If you don't specify this, WAF uses its default settings for ChallengeConfig.

Source

pub fn get_challenge_config(&self) -> &Option<ChallengeConfig>

Specifies how WAF should handle challenge evaluations for rules that don't have their own ChallengeConfig settings. If you don't specify this, WAF uses its default settings for ChallengeConfig.

Source

pub fn token_domains(self, input: impl Into<String>) -> Self

Appends an item to token_domains.

To override the contents of this collection use set_token_domains.

Specifies the domains that WAF should accept in a web request token. This enables the use of tokens across multiple protected websites. When WAF provides a token, it uses the domain of the Amazon Web Services resource that the web ACL is protecting. If you don't specify a list of token domains, WAF accepts tokens only for the domain of the protected resource. With a token domain list, WAF accepts the resource's host domain plus all domains in the token domain list, including their prefixed subdomains.

Example JSON: "TokenDomains": { "mywebsite.com", "myotherwebsite.com" }

Public suffixes aren't allowed. For example, you can't use gov.au or co.uk as token domains.

Source

pub fn set_token_domains(self, input: Option<Vec<String>>) -> Self

Specifies the domains that WAF should accept in a web request token. This enables the use of tokens across multiple protected websites. When WAF provides a token, it uses the domain of the Amazon Web Services resource that the web ACL is protecting. If you don't specify a list of token domains, WAF accepts tokens only for the domain of the protected resource. With a token domain list, WAF accepts the resource's host domain plus all domains in the token domain list, including their prefixed subdomains.

Example JSON: "TokenDomains": { "mywebsite.com", "myotherwebsite.com" }

Public suffixes aren't allowed. For example, you can't use gov.au or co.uk as token domains.

Source

pub fn get_token_domains(&self) -> &Option<Vec<String>>

Specifies the domains that WAF should accept in a web request token. This enables the use of tokens across multiple protected websites. When WAF provides a token, it uses the domain of the Amazon Web Services resource that the web ACL is protecting. If you don't specify a list of token domains, WAF accepts tokens only for the domain of the protected resource. With a token domain list, WAF accepts the resource's host domain plus all domains in the token domain list, including their prefixed subdomains.

Example JSON: "TokenDomains": { "mywebsite.com", "myotherwebsite.com" }

Public suffixes aren't allowed. For example, you can't use gov.au or co.uk as token domains.

Source

pub fn association_config(self, input: AssociationConfig) -> Self

Specifies custom configurations for the associations between the web ACL and protected resources.

Use this to customize the maximum size of the request body that your protected resources forward to WAF for inspection. You can customize this setting for CloudFront, API Gateway, Amazon Cognito, App Runner, or Verified Access resources. The default setting is 16 KB (16,384 bytes).

You are charged additional fees when your protected resources forward body sizes that are larger than the default. For more information, see WAF Pricing.

For Application Load Balancer and AppSync, the limit is fixed at 8 KB (8,192 bytes).

Source

pub fn set_association_config(self, input: Option<AssociationConfig>) -> Self

Specifies custom configurations for the associations between the web ACL and protected resources.

Use this to customize the maximum size of the request body that your protected resources forward to WAF for inspection. You can customize this setting for CloudFront, API Gateway, Amazon Cognito, App Runner, or Verified Access resources. The default setting is 16 KB (16,384 bytes).

You are charged additional fees when your protected resources forward body sizes that are larger than the default. For more information, see WAF Pricing.

For Application Load Balancer and AppSync, the limit is fixed at 8 KB (8,192 bytes).

Source

pub fn get_association_config(&self) -> &Option<AssociationConfig>

Specifies custom configurations for the associations between the web ACL and protected resources.

Use this to customize the maximum size of the request body that your protected resources forward to WAF for inspection. You can customize this setting for CloudFront, API Gateway, Amazon Cognito, App Runner, or Verified Access resources. The default setting is 16 KB (16,384 bytes).

You are charged additional fees when your protected resources forward body sizes that are larger than the default. For more information, see WAF Pricing.

For Application Load Balancer and AppSync, the limit is fixed at 8 KB (8,192 bytes).

Source

pub fn build(self) -> Result<CreateWebAclInput, BuildError>

Consumes the builder and constructs a CreateWebAclInput.

Source §

impl CreateWebAclInputBuilder

Source

pub async fn send_with( self, client: &Client, ) -> Result<CreateWebAclOutput, SdkError<CreateWebACLError, HttpResponse>>

Sends a request with this input using the given client.

Trait Implementations§

Source §

impl Clone for CreateWebAclInputBuilder

Source §

fn clone(&self) -> CreateWebAclInputBuilder

Returns a copy of the value. Read more

1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

Source §

impl Debug for CreateWebAclInputBuilder

Source §

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Source §

impl Default for CreateWebAclInputBuilder

Source §

fn default() -> CreateWebAclInputBuilder

Returns the “default value” for a type. Read more

Source §

impl PartialEq for CreateWebAclInputBuilder

Source §

fn eq(&self, other: &CreateWebAclInputBuilder) -> bool

Tests for self and other values to be equal, and is used by ==.

1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

Source §

impl StructuralPartialEq for CreateWebAclInputBuilder

Auto Trait Implementations§

§

impl UnwindSafe for CreateWebAclInputBuilder

Blanket Implementations§

Source §

impl<T> Any for T
where T: 'static + ?Sized,

Source §

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

Source §

impl<T> Borrow<T> for T
where T: ?Sized,

Source §

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

Source §

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source §

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

Source §

impl<T> CloneToUninit for T
where T: Clone,

Source §

unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)

Performs copy-assignment from self to dst. Read more

Source §

impl<T> From<T> for T

Source §

fn from(t: T) -> T

Returns the argument unchanged.

Source §

impl<T> Instrument for T

Source §

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more

Source §

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

Source §

impl<T, U> Into for T
where U: From<T>,

Source §

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source §

impl<T> IntoEither for T

Source §

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

Source §

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

Source §

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

Source §

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.

Source §

impl<T> Paint for T
where T: ?Sized,

Source §

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();

Source §

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to Color::Primary.

§Example

println!("{}", value.primary());

Source §

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to Color::Fixed.

§Example

println!("{}", value.fixed(color));

Source §

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to Color::Rgb.

§Example

println!("{}", value.rgb(r, g, b));

Source §

fn black(&self) -> Painted<&T>

Returns self with the fg() set to Color::Black.

§Example

println!("{}", value.black());

Source §

fn red(&self) -> Painted<&T>

Returns self with the fg() set to Color::Red.

§Example

println!("{}", value.red());

Source §

fn green(&self) -> Painted<&T>

Returns self with the fg() set to Color::Green.

§Example

println!("{}", value.green());

Source §

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to Color::Yellow.

§Example

println!("{}", value.yellow());

Source §

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to Color::Blue.

§Example

println!("{}", value.blue());

Source §

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to Color::Magenta.

§Example

println!("{}", value.magenta());

Source §

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to Color::Cyan.

§Example

println!("{}", value.cyan());

Source §

fn white(&self) -> Painted<&T>

Returns self with the fg() set to Color::White.

§Example

println!("{}", value.white());

Source §

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightBlack.

§Example

println!("{}", value.bright_black());

Source §

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightRed.

§Example

println!("{}", value.bright_red());

Source §

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightGreen.

§Example

println!("{}", value.bright_green());

Source §

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightYellow.

§Example

println!("{}", value.bright_yellow());

Source §

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightBlue.

§Example

println!("{}", value.bright_blue());

Source §

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightMagenta.

§Example

println!("{}", value.bright_magenta());

Source §

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightCyan.

§Example

println!("{}", value.bright_cyan());

Source §

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightWhite.

§Example

println!("{}", value.bright_white());

Source §

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();

Source §

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to Color::Primary.

§Example

println!("{}", value.on_primary());

Source §

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to Color::Fixed.

§Example

println!("{}", value.on_fixed(color));

Source §

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to Color::Rgb.

§Example

println!("{}", value.on_rgb(r, g, b));

Source §

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to Color::Black.

§Example

println!("{}", value.on_black());

Source §

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to Color::Red.

§Example

println!("{}", value.on_red());

Source §

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to Color::Green.

§Example

println!("{}", value.on_green());

Source §

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to Color::Yellow.

§Example

println!("{}", value.on_yellow());

Source §

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to Color::Blue.

§Example

println!("{}", value.on_blue());

Source §

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to Color::Magenta.

§Example

println!("{}", value.on_magenta());

Source §

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to Color::Cyan.

§Example

println!("{}", value.on_cyan());

Source §

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to Color::White.

§Example

println!("{}", value.on_white());

Source §

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightBlack.

§Example

println!("{}", value.on_bright_black());

Source §

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightRed.

§Example

println!("{}", value.on_bright_red());

Source §

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightGreen.

§Example

println!("{}", value.on_bright_green());

Source §

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightYellow.

§Example

println!("{}", value.on_bright_yellow());

Source §

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightBlue.

§Example

println!("{}", value.on_bright_blue());

Source §

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightMagenta.

§Example

println!("{}", value.on_bright_magenta());

Source §

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightCyan.

§Example

println!("{}", value.on_bright_cyan());

Source §

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightWhite.

§Example

println!("{}", value.on_bright_white());

Source §

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();

Source §

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Bold.

§Example

println!("{}", value.bold());

Source §

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Dim.

§Example

println!("{}", value.dim());

Source §

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Italic.

§Example

println!("{}", value.italic());

Source §

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Underline.

§Example

println!("{}", value.underline());

Source §

fn blink(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Blink.

§Example

println!("{}", value.blink());

Source §

fn rapid_blink(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::RapidBlink.

§Example

println!("{}", value.rapid_blink());

Source §

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Invert.

§Example

println!("{}", value.invert());

Source §

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Conceal.

§Example

println!("{}", value.conceal());

Source §

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Strike.

§Example

println!("{}", value.strike());

Source §

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();

Source §

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Mask.

§Example

println!("{}", value.mask());

Source §

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Wrap.

§Example

println!("{}", value.wrap());

Source §

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Linger.

§Example

println!("{}", value.linger());

Source §

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to Quirk::Clear.

§Example

println!("{}", value.clear());

Source §

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Resetting.

§Example

println!("{}", value.resetting());

Source §

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Bright.

§Example

println!("{}", value.bright());

Source §

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::OnBright.

§Example

println!("{}", value.on_bright());

Source §

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);

Source §

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more

Source §

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more

Source §

impl<T> Same for T

Source §

type Output = T

Should always be Self

Source §

impl<T> ToOwned for T
where T: Clone,

Source §

type Owned = T

The resulting type after obtaining ownership.

Source §

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

Source §

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more

Source §

impl<T, U> TryFrom for T
where U: Into<T>,

Source §

type Error = Infallible

The type returned in the event of a conversion error.

Source §

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

Source §

impl<T, U> TryInto for T
where U: TryFrom<T>,

Source §

type Error = >::Error

The type returned in the event of a conversion error.

Source §

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

Source §

impl<T> WithSubscriber for T

Source §

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more

Source §

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more

Source §

impl<T> ErasedDestructor for T
where T: 'static,

Source §

Struct CreateWebAclInputBuilderCopy item path

Implementations§

impl CreateWebAclInputBuilder

pub fn name(self, input: impl Into<String>) -> Self

pub fn set_name(self, input: Option<String>) -> Self

pub fn get_name(&self) -> &Option<String>

pub fn scope(self, input: Scope) -> Self

pub fn set_scope(self, input: Option<Scope>) -> Self

pub fn get_scope(&self) -> &Option<Scope>

pub fn default_action(self, input: DefaultAction) -> Self

pub fn set_default_action(self, input: Option<DefaultAction>) -> Self

pub fn get_default_action(&self) -> &Option<DefaultAction>

pub fn description(self, input: impl Into<String>) -> Self

pub fn set_description(self, input: Option<String>) -> Self

pub fn get_description(&self) -> &Option<String>

pub fn rules(self, input: Rule) -> Self

pub fn set_rules(self, input: Option<Vec<Rule>>) -> Self

pub fn get_rules(&self) -> &Option<Vec<Rule>>

pub fn visibility_config(self, input: VisibilityConfig) -> Self

pub fn set_visibility_config(self, input: Option<VisibilityConfig>) -> Self

pub fn get_visibility_config(&self) -> &Option<VisibilityConfig>

pub fn tags(self, input: Tag) -> Self

pub fn set_tags(self, input: Option<Vec<Tag>>) -> Self

pub fn get_tags(&self) -> &Option<Vec<Tag>>

pub fn custom_response_bodies( self, k: impl Into<String>, v: CustomResponseBody, ) -> Self

pub fn set_custom_response_bodies( self, input: Option<HashMap<String, CustomResponseBody>>, ) -> Self

pub fn get_custom_response_bodies( &self, ) -> &Option<HashMap<String, CustomResponseBody>>

pub fn captcha_config(self, input: CaptchaConfig) -> Self

pub fn set_captcha_config(self, input: Option<CaptchaConfig>) -> Self

pub fn get_captcha_config(&self) -> &Option<CaptchaConfig>

pub fn challenge_config(self, input: ChallengeConfig) -> Self

pub fn set_challenge_config(self, input: Option<ChallengeConfig>) -> Self

pub fn get_challenge_config(&self) -> &Option<ChallengeConfig>

pub fn token_domains(self, input: impl Into<String>) -> Self

pub fn set_token_domains(self, input: Option<Vec<String>>) -> Self

pub fn get_token_domains(&self) -> &Option<Vec<String>>

pub fn association_config(self, input: AssociationConfig) -> Self

pub fn set_association_config(self, input: Option<AssociationConfig>) -> Self

pub fn get_association_config(&self) -> &Option<AssociationConfig>

pub fn build(self) -> Result<CreateWebAclInput, BuildError>

impl CreateWebAclInputBuilder

pub async fn send_with( self, client: &Client, ) -> Result<CreateWebAclOutput, SdkError<CreateWebACLError, HttpResponse>>

Trait Implementations§

impl Clone for CreateWebAclInputBuilder

fn clone(&self) -> CreateWebAclInputBuilder

fn clone_from(&mut self, source: &Self)

impl Debug for CreateWebAclInputBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

impl Default for CreateWebAclInputBuilder

fn default() -> CreateWebAclInputBuilder

impl PartialEq for CreateWebAclInputBuilder

fn eq(&self, other: &CreateWebAclInputBuilder) -> bool

fn ne(&self, other: &Rhs) -> bool

impl StructuralPartialEq for CreateWebAclInputBuilder

Auto Trait Implementations§

impl Freeze for CreateWebAclInputBuilder

impl RefUnwindSafe for CreateWebAclInputBuilder

impl Send for CreateWebAclInputBuilder

impl Sync for CreateWebAclInputBuilder

impl Unpin for CreateWebAclInputBuilder

impl UnwindSafe for CreateWebAclInputBuilder

Blanket Implementations§

impl<T> Any for Twhere T: 'static + ?Sized,

fn type_id(&self) -> TypeId

impl<T> Borrow<T> for Twhere T: ?Sized,

fn borrow(&self) -> &T

impl<T> BorrowMut<T> for Twhere T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

impl<T> CloneToUninit for Twhere T: Clone,

unsafe fn clone_to_uninit(&self, dst: *mut T)

impl<T> From<T> for T

fn from(t: T) -> T

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

fn in_current_span(self) -> Instrumented<Self>

impl<T, U> Into<U> for Twhere U: From<T>,

fn into(self) -> U

impl<T> IntoEither for T

fn into_either(self, into_left: bool) -> Either<Self, Self>

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>where F: FnOnce(&Self) -> bool,

Struct CreateWebAclInputBuilder

impl<T> Any for T
where T: 'static + ?Sized,

impl<T> Borrow<T> for T
where T: ?Sized,

impl<T> BorrowMut<T> for T
where T: ?Sized,

impl<T> CloneToUninit for T
where T: Clone,

impl<T, U> Into<U> for T
where U: From<T>,

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

impl<T> Paint for T
where T: ?Sized,