pub struct GetRateBasedStatementManagedKeysFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to GetRateBasedStatementManagedKeys.
Retrieves the IP addresses that are currently blocked by a rate-based rule instance. This is only available for rate-based rules that aggregate solely on the IP address or on the forwarded IP address.
The maximum number of addresses that can be blocked for a single rate-based rule instance is 10,000. If more than 10,000 addresses exceed the rate limit, those with the highest rates are blocked.
For a rate-based rule that you've defined inside a rule group, provide the name of the rule group reference statement in your request, in addition to the rate-based rule name and the web ACL name.
WAF monitors web requests and manages keys independently for each unique combination of web ACL, optional rule group, and rate-based rule. For example, if you define a rate-based rule inside a rule group, and then use the rule group in a web ACL, WAF monitors web requests and manages keys for that web ACL, rule group reference statement, and rate-based rule instance. If you use the same rule group in a second web ACL, WAF monitors web requests and manages keys for this second usage completely independent of your first.
Implementations§
Source§impl GetRateBasedStatementManagedKeysFluentBuilder
impl GetRateBasedStatementManagedKeysFluentBuilder
Sourcepub fn as_input(&self) -> &GetRateBasedStatementManagedKeysInputBuilder
pub fn as_input(&self) -> &GetRateBasedStatementManagedKeysInputBuilder
Access the GetRateBasedStatementManagedKeys as a reference.
Sourcepub async fn send(
self,
) -> Result<GetRateBasedStatementManagedKeysOutput, SdkError<GetRateBasedStatementManagedKeysError, HttpResponse>>
pub async fn send( self, ) -> Result<GetRateBasedStatementManagedKeysOutput, SdkError<GetRateBasedStatementManagedKeysError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<GetRateBasedStatementManagedKeysOutput, GetRateBasedStatementManagedKeysError, Self>
pub fn customize( self, ) -> CustomizableOperation<GetRateBasedStatementManagedKeysOutput, GetRateBasedStatementManagedKeysError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn scope(self, input: Scope) -> Self
pub fn scope(self, input: Scope) -> Self
Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, an App Runner service, or an Amazon Web Services Verified Access instance.
To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:
-
CLI - Specify the Region when you use the CloudFront scope:
--scope=CLOUDFRONT --region=us-east-1. -
API and SDKs - For all calls, use the Region endpoint us-east-1.
Sourcepub fn set_scope(self, input: Option<Scope>) -> Self
pub fn set_scope(self, input: Option<Scope>) -> Self
Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, an App Runner service, or an Amazon Web Services Verified Access instance.
To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:
-
CLI - Specify the Region when you use the CloudFront scope:
--scope=CLOUDFRONT --region=us-east-1. -
API and SDKs - For all calls, use the Region endpoint us-east-1.
Sourcepub fn get_scope(&self) -> &Option<Scope>
pub fn get_scope(&self) -> &Option<Scope>
Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, an App Runner service, or an Amazon Web Services Verified Access instance.
To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:
-
CLI - Specify the Region when you use the CloudFront scope:
--scope=CLOUDFRONT --region=us-east-1. -
API and SDKs - For all calls, use the Region endpoint us-east-1.
Sourcepub fn web_acl_name(self, input: impl Into<String>) -> Self
pub fn web_acl_name(self, input: impl Into<String>) -> Self
The name of the web ACL. You cannot change the name of a web ACL after you create it.
Sourcepub fn set_web_acl_name(self, input: Option<String>) -> Self
pub fn set_web_acl_name(self, input: Option<String>) -> Self
The name of the web ACL. You cannot change the name of a web ACL after you create it.
Sourcepub fn get_web_acl_name(&self) -> &Option<String>
pub fn get_web_acl_name(&self) -> &Option<String>
The name of the web ACL. You cannot change the name of a web ACL after you create it.
Sourcepub fn web_acl_id(self, input: impl Into<String>) -> Self
pub fn web_acl_id(self, input: impl Into<String>) -> Self
The unique identifier for the web ACL. This ID is returned in the responses to create and list commands. You provide it to operations like update and delete.
Sourcepub fn set_web_acl_id(self, input: Option<String>) -> Self
pub fn set_web_acl_id(self, input: Option<String>) -> Self
The unique identifier for the web ACL. This ID is returned in the responses to create and list commands. You provide it to operations like update and delete.
Sourcepub fn get_web_acl_id(&self) -> &Option<String>
pub fn get_web_acl_id(&self) -> &Option<String>
The unique identifier for the web ACL. This ID is returned in the responses to create and list commands. You provide it to operations like update and delete.
Sourcepub fn rule_group_rule_name(self, input: impl Into<String>) -> Self
pub fn rule_group_rule_name(self, input: impl Into<String>) -> Self
The name of the rule group reference statement in your web ACL. This is required only when you have the rate-based rule nested inside a rule group.
Sourcepub fn set_rule_group_rule_name(self, input: Option<String>) -> Self
pub fn set_rule_group_rule_name(self, input: Option<String>) -> Self
The name of the rule group reference statement in your web ACL. This is required only when you have the rate-based rule nested inside a rule group.
Sourcepub fn get_rule_group_rule_name(&self) -> &Option<String>
pub fn get_rule_group_rule_name(&self) -> &Option<String>
The name of the rule group reference statement in your web ACL. This is required only when you have the rate-based rule nested inside a rule group.
Sourcepub fn rule_name(self, input: impl Into<String>) -> Self
pub fn rule_name(self, input: impl Into<String>) -> Self
The name of the rate-based rule to get the keys for. If you have the rule defined inside a rule group that you're using in your web ACL, also provide the name of the rule group reference statement in the request parameter RuleGroupRuleName.
Sourcepub fn set_rule_name(self, input: Option<String>) -> Self
pub fn set_rule_name(self, input: Option<String>) -> Self
The name of the rate-based rule to get the keys for. If you have the rule defined inside a rule group that you're using in your web ACL, also provide the name of the rule group reference statement in the request parameter RuleGroupRuleName.
Sourcepub fn get_rule_name(&self) -> &Option<String>
pub fn get_rule_name(&self) -> &Option<String>
The name of the rate-based rule to get the keys for. If you have the rule defined inside a rule group that you're using in your web ACL, also provide the name of the rule group reference statement in the request parameter RuleGroupRuleName.
Trait Implementations§
Source§impl Clone for GetRateBasedStatementManagedKeysFluentBuilder
impl Clone for GetRateBasedStatementManagedKeysFluentBuilder
Source§fn clone(&self) -> GetRateBasedStatementManagedKeysFluentBuilder
fn clone(&self) -> GetRateBasedStatementManagedKeysFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for GetRateBasedStatementManagedKeysFluentBuilder
impl !RefUnwindSafe for GetRateBasedStatementManagedKeysFluentBuilder
impl Send for GetRateBasedStatementManagedKeysFluentBuilder
impl Sync for GetRateBasedStatementManagedKeysFluentBuilder
impl Unpin for GetRateBasedStatementManagedKeysFluentBuilder
impl !UnwindSafe for GetRateBasedStatementManagedKeysFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§unsafe fn clone_to_uninit(&self, dst: *mut T)
unsafe fn clone_to_uninit(&self, dst: *mut T)
clone_to_uninit)Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);