pub struct ListManagedRuleSetsFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to ListManagedRuleSets.
Retrieves the managed rule sets that you own.
This is intended for use only by vendors of managed rule sets. Vendors are Amazon Web Services and Amazon Web Services Marketplace sellers.
Vendors, you can use the managed rule set APIs to provide controlled rollout of your versioned managed rule group offerings for your customers. The APIs are ListManagedRuleSets, GetManagedRuleSet, PutManagedRuleSetVersions, and UpdateManagedRuleSetVersionExpiryDate.
Implementations§
Source§impl ListManagedRuleSetsFluentBuilder
impl ListManagedRuleSetsFluentBuilder
Sourcepub fn as_input(&self) -> &ListManagedRuleSetsInputBuilder
pub fn as_input(&self) -> &ListManagedRuleSetsInputBuilder
Access the ListManagedRuleSets as a reference.
Sourcepub async fn send(
self,
) -> Result<ListManagedRuleSetsOutput, SdkError<ListManagedRuleSetsError, HttpResponse>>
pub async fn send( self, ) -> Result<ListManagedRuleSetsOutput, SdkError<ListManagedRuleSetsError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<ListManagedRuleSetsOutput, ListManagedRuleSetsError, Self>
pub fn customize( self, ) -> CustomizableOperation<ListManagedRuleSetsOutput, ListManagedRuleSetsError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn scope(self, input: Scope) -> Self
pub fn scope(self, input: Scope) -> Self
Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, an App Runner service, or an Amazon Web Services Verified Access instance.
To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:
-
CLI - Specify the Region when you use the CloudFront scope:
--scope=CLOUDFRONT --region=us-east-1. -
API and SDKs - For all calls, use the Region endpoint us-east-1.
Sourcepub fn set_scope(self, input: Option<Scope>) -> Self
pub fn set_scope(self, input: Option<Scope>) -> Self
Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, an App Runner service, or an Amazon Web Services Verified Access instance.
To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:
-
CLI - Specify the Region when you use the CloudFront scope:
--scope=CLOUDFRONT --region=us-east-1. -
API and SDKs - For all calls, use the Region endpoint us-east-1.
Sourcepub fn get_scope(&self) -> &Option<Scope>
pub fn get_scope(&self) -> &Option<Scope>
Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, an App Runner service, or an Amazon Web Services Verified Access instance.
To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:
-
CLI - Specify the Region when you use the CloudFront scope:
--scope=CLOUDFRONT --region=us-east-1. -
API and SDKs - For all calls, use the Region endpoint us-east-1.
Sourcepub fn next_marker(self, input: impl Into<String>) -> Self
pub fn next_marker(self, input: impl Into<String>) -> Self
When you request a list of objects with a Limit setting, if the number of objects that are still available for retrieval exceeds the limit, WAF returns a NextMarker value in the response. To retrieve the next batch of objects, provide the marker from the prior call in your next request.
Sourcepub fn set_next_marker(self, input: Option<String>) -> Self
pub fn set_next_marker(self, input: Option<String>) -> Self
When you request a list of objects with a Limit setting, if the number of objects that are still available for retrieval exceeds the limit, WAF returns a NextMarker value in the response. To retrieve the next batch of objects, provide the marker from the prior call in your next request.
Sourcepub fn get_next_marker(&self) -> &Option<String>
pub fn get_next_marker(&self) -> &Option<String>
When you request a list of objects with a Limit setting, if the number of objects that are still available for retrieval exceeds the limit, WAF returns a NextMarker value in the response. To retrieve the next batch of objects, provide the marker from the prior call in your next request.
Sourcepub fn limit(self, input: i32) -> Self
pub fn limit(self, input: i32) -> Self
The maximum number of objects that you want WAF to return for this request. If more objects are available, in the response, WAF provides a NextMarker value that you can use in a subsequent call to get the next batch of objects.
Trait Implementations§
Source§impl Clone for ListManagedRuleSetsFluentBuilder
impl Clone for ListManagedRuleSetsFluentBuilder
Source§fn clone(&self) -> ListManagedRuleSetsFluentBuilder
fn clone(&self) -> ListManagedRuleSetsFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for ListManagedRuleSetsFluentBuilder
impl !RefUnwindSafe for ListManagedRuleSetsFluentBuilder
impl Send for ListManagedRuleSetsFluentBuilder
impl Sync for ListManagedRuleSetsFluentBuilder
impl Unpin for ListManagedRuleSetsFluentBuilder
impl !UnwindSafe for ListManagedRuleSetsFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§unsafe fn clone_to_uninit(&self, dst: *mut T)
unsafe fn clone_to_uninit(&self, dst: *mut T)
clone_to_uninit)Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);