#[non_exhaustive]pub struct UpdateIpSetInput {
pub name: Option<String>,
pub scope: Option<Scope>,
pub id: Option<String>,
pub description: Option<String>,
pub addresses: Option<Vec<String>>,
pub lock_token: Option<String>,
}Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.name: Option<String>The name of the IP set. You cannot change the name of an IPSet after you create it.
scope: Option<Scope>Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, an App Runner service, or an Amazon Web Services Verified Access instance.
To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:
-
CLI - Specify the Region when you use the CloudFront scope:
--scope=CLOUDFRONT --region=us-east-1. -
API and SDKs - For all calls, use the Region endpoint us-east-1.
id: Option<String>A unique identifier for the set. This ID is returned in the responses to create and list commands. You provide it to operations like update and delete.
description: Option<String>A description of the IP set that helps with identification.
addresses: Option<Vec<String>>Contains an array of strings that specifies zero or more IP addresses or blocks of IP addresses that you want WAF to inspect for in incoming requests. All addresses must be specified using Classless Inter-Domain Routing (CIDR) notation. WAF supports all IPv4 and IPv6 CIDR ranges except for /0.
Example address strings:
-
For requests that originated from the IP address 192.0.2.44, specify
192.0.2.44/32. -
For requests that originated from IP addresses from 192.0.2.0 to 192.0.2.255, specify
192.0.2.0/24. -
For requests that originated from the IP address 1111:0000:0000:0000:0000:0000:0000:0111, specify
1111:0000:0000:0000:0000:0000:0000:0111/128. -
For requests that originated from IP addresses 1111:0000:0000:0000:0000:0000:0000:0000 to 1111:0000:0000:0000:ffff:ffff:ffff:ffff, specify
1111:0000:0000:0000:0000:0000:0000:0000/64.
For more information about CIDR notation, see the Wikipedia entry Classless Inter-Domain Routing.
Example JSON Addresses specifications:
-
Empty array:
"Addresses": \[\] -
Array with one address:
"Addresses": \["192.0.2.44/32"\] -
Array with three addresses:
"Addresses": \["192.0.2.44/32", "192.0.2.0/24", "192.0.0.0/16"\] -
INVALID specification:
"Addresses": \[""\]INVALID
lock_token: Option<String>A token used for optimistic locking. WAF returns a token to your get and list requests, to mark the state of the entity at the time of the request. To make changes to the entity associated with the token, you provide the token to operations like update and delete. WAF uses the token to ensure that no changes have been made to the entity since you last retrieved it. If a change has been made, the update fails with a WAFOptimisticLockException. If this happens, perform another get, and use the new token returned by that operation.
Implementations§
Source§impl UpdateIpSetInput
impl UpdateIpSetInput
Sourcepub fn name(&self) -> Option<&str>
pub fn name(&self) -> Option<&str>
The name of the IP set. You cannot change the name of an IPSet after you create it.
Sourcepub fn scope(&self) -> Option<&Scope>
pub fn scope(&self) -> Option<&Scope>
Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, an App Runner service, or an Amazon Web Services Verified Access instance.
To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:
-
CLI - Specify the Region when you use the CloudFront scope:
--scope=CLOUDFRONT --region=us-east-1. -
API and SDKs - For all calls, use the Region endpoint us-east-1.
Sourcepub fn id(&self) -> Option<&str>
pub fn id(&self) -> Option<&str>
A unique identifier for the set. This ID is returned in the responses to create and list commands. You provide it to operations like update and delete.
Sourcepub fn description(&self) -> Option<&str>
pub fn description(&self) -> Option<&str>
A description of the IP set that helps with identification.
Sourcepub fn addresses(&self) -> &[String]
pub fn addresses(&self) -> &[String]
Contains an array of strings that specifies zero or more IP addresses or blocks of IP addresses that you want WAF to inspect for in incoming requests. All addresses must be specified using Classless Inter-Domain Routing (CIDR) notation. WAF supports all IPv4 and IPv6 CIDR ranges except for /0.
Example address strings:
-
For requests that originated from the IP address 192.0.2.44, specify
192.0.2.44/32. -
For requests that originated from IP addresses from 192.0.2.0 to 192.0.2.255, specify
192.0.2.0/24. -
For requests that originated from the IP address 1111:0000:0000:0000:0000:0000:0000:0111, specify
1111:0000:0000:0000:0000:0000:0000:0111/128. -
For requests that originated from IP addresses 1111:0000:0000:0000:0000:0000:0000:0000 to 1111:0000:0000:0000:ffff:ffff:ffff:ffff, specify
1111:0000:0000:0000:0000:0000:0000:0000/64.
For more information about CIDR notation, see the Wikipedia entry Classless Inter-Domain Routing.
Example JSON Addresses specifications:
-
Empty array:
"Addresses": \[\] -
Array with one address:
"Addresses": \["192.0.2.44/32"\] -
Array with three addresses:
"Addresses": \["192.0.2.44/32", "192.0.2.0/24", "192.0.0.0/16"\] -
INVALID specification:
"Addresses": \[""\]INVALID
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .addresses.is_none().
Sourcepub fn lock_token(&self) -> Option<&str>
pub fn lock_token(&self) -> Option<&str>
A token used for optimistic locking. WAF returns a token to your get and list requests, to mark the state of the entity at the time of the request. To make changes to the entity associated with the token, you provide the token to operations like update and delete. WAF uses the token to ensure that no changes have been made to the entity since you last retrieved it. If a change has been made, the update fails with a WAFOptimisticLockException. If this happens, perform another get, and use the new token returned by that operation.
Source§impl UpdateIpSetInput
impl UpdateIpSetInput
Sourcepub fn builder() -> UpdateIpSetInputBuilder
pub fn builder() -> UpdateIpSetInputBuilder
Creates a new builder-style object to manufacture UpdateIpSetInput.
Trait Implementations§
Source§impl Clone for UpdateIpSetInput
impl Clone for UpdateIpSetInput
Source§fn clone(&self) -> UpdateIpSetInput
fn clone(&self) -> UpdateIpSetInput
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreSource§impl Debug for UpdateIpSetInput
impl Debug for UpdateIpSetInput
Source§impl PartialEq for UpdateIpSetInput
impl PartialEq for UpdateIpSetInput
impl StructuralPartialEq for UpdateIpSetInput
Auto Trait Implementations§
impl Freeze for UpdateIpSetInput
impl RefUnwindSafe for UpdateIpSetInput
impl Send for UpdateIpSetInput
impl Sync for UpdateIpSetInput
impl Unpin for UpdateIpSetInput
impl UnwindSafe for UpdateIpSetInput
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§unsafe fn clone_to_uninit(&self, dst: *mut T)
unsafe fn clone_to_uninit(&self, dst: *mut T)
clone_to_uninit)Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);