pub struct UpdateRuleGroupFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to UpdateRuleGroup.
Updates the specified RuleGroup.
This operation completely replaces the mutable specifications that you already have for the rule group with the ones that you provide to this call.
To modify a rule group, do the following:
-
Retrieve it by calling
GetRuleGroup -
Update its settings as needed
-
Provide the complete rule group specification to this call
A rule group defines a collection of rules to inspect and control web requests that you can use in a WebACL. When you create a rule group, you define an immutable capacity limit. If you update a rule group, you must stay within the capacity. This allows others to reuse the rule group with confidence in its capacity requirements.
Temporary inconsistencies during updates
When you create or change a web ACL or other WAF resources, the changes take a small amount of time to propagate to all areas where the resources are stored. The propagation time can be from a few seconds to a number of minutes.
The following are examples of the temporary inconsistencies that you might notice during change propagation:
-
After you create a web ACL, if you try to associate it with a resource, you might get an exception indicating that the web ACL is unavailable.
-
After you add a rule group to a web ACL, the new rule group rules might be in effect in one area where the web ACL is used and not in another.
-
After you change a rule action setting, you might see the old action in some places and the new action in others.
-
After you add an IP address to an IP set that is in use in a blocking rule, the new address might be blocked in one area while still allowed in another.
Implementations§
Source§impl UpdateRuleGroupFluentBuilder
impl UpdateRuleGroupFluentBuilder
Sourcepub fn as_input(&self) -> &UpdateRuleGroupInputBuilder
pub fn as_input(&self) -> &UpdateRuleGroupInputBuilder
Access the UpdateRuleGroup as a reference.
Sourcepub async fn send(
self,
) -> Result<UpdateRuleGroupOutput, SdkError<UpdateRuleGroupError, HttpResponse>>
pub async fn send( self, ) -> Result<UpdateRuleGroupOutput, SdkError<UpdateRuleGroupError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<UpdateRuleGroupOutput, UpdateRuleGroupError, Self>
pub fn customize( self, ) -> CustomizableOperation<UpdateRuleGroupOutput, UpdateRuleGroupError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn name(self, input: impl Into<String>) -> Self
pub fn name(self, input: impl Into<String>) -> Self
The name of the rule group. You cannot change the name of a rule group after you create it.
Sourcepub fn set_name(self, input: Option<String>) -> Self
pub fn set_name(self, input: Option<String>) -> Self
The name of the rule group. You cannot change the name of a rule group after you create it.
Sourcepub fn get_name(&self) -> &Option<String>
pub fn get_name(&self) -> &Option<String>
The name of the rule group. You cannot change the name of a rule group after you create it.
Sourcepub fn scope(self, input: Scope) -> Self
pub fn scope(self, input: Scope) -> Self
Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, an App Runner service, or an Amazon Web Services Verified Access instance.
To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:
-
CLI - Specify the Region when you use the CloudFront scope:
--scope=CLOUDFRONT --region=us-east-1. -
API and SDKs - For all calls, use the Region endpoint us-east-1.
Sourcepub fn set_scope(self, input: Option<Scope>) -> Self
pub fn set_scope(self, input: Option<Scope>) -> Self
Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, an App Runner service, or an Amazon Web Services Verified Access instance.
To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:
-
CLI - Specify the Region when you use the CloudFront scope:
--scope=CLOUDFRONT --region=us-east-1. -
API and SDKs - For all calls, use the Region endpoint us-east-1.
Sourcepub fn get_scope(&self) -> &Option<Scope>
pub fn get_scope(&self) -> &Option<Scope>
Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, an App Runner service, or an Amazon Web Services Verified Access instance.
To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:
-
CLI - Specify the Region when you use the CloudFront scope:
--scope=CLOUDFRONT --region=us-east-1. -
API and SDKs - For all calls, use the Region endpoint us-east-1.
Sourcepub fn id(self, input: impl Into<String>) -> Self
pub fn id(self, input: impl Into<String>) -> Self
A unique identifier for the rule group. This ID is returned in the responses to create and list commands. You provide it to operations like update and delete.
Sourcepub fn set_id(self, input: Option<String>) -> Self
pub fn set_id(self, input: Option<String>) -> Self
A unique identifier for the rule group. This ID is returned in the responses to create and list commands. You provide it to operations like update and delete.
Sourcepub fn get_id(&self) -> &Option<String>
pub fn get_id(&self) -> &Option<String>
A unique identifier for the rule group. This ID is returned in the responses to create and list commands. You provide it to operations like update and delete.
Sourcepub fn description(self, input: impl Into<String>) -> Self
pub fn description(self, input: impl Into<String>) -> Self
A description of the rule group that helps with identification.
Sourcepub fn set_description(self, input: Option<String>) -> Self
pub fn set_description(self, input: Option<String>) -> Self
A description of the rule group that helps with identification.
Sourcepub fn get_description(&self) -> &Option<String>
pub fn get_description(&self) -> &Option<String>
A description of the rule group that helps with identification.
Sourcepub fn rules(self, input: Rule) -> Self
pub fn rules(self, input: Rule) -> Self
Appends an item to Rules.
To override the contents of this collection use set_rules.
The Rule statements used to identify the web requests that you want to manage. Each rule includes one top-level statement that WAF uses to identify matching web requests, and parameters that govern how WAF handles them.
Sourcepub fn set_rules(self, input: Option<Vec<Rule>>) -> Self
pub fn set_rules(self, input: Option<Vec<Rule>>) -> Self
The Rule statements used to identify the web requests that you want to manage. Each rule includes one top-level statement that WAF uses to identify matching web requests, and parameters that govern how WAF handles them.
Sourcepub fn get_rules(&self) -> &Option<Vec<Rule>>
pub fn get_rules(&self) -> &Option<Vec<Rule>>
The Rule statements used to identify the web requests that you want to manage. Each rule includes one top-level statement that WAF uses to identify matching web requests, and parameters that govern how WAF handles them.
Sourcepub fn visibility_config(self, input: VisibilityConfig) -> Self
pub fn visibility_config(self, input: VisibilityConfig) -> Self
Defines and enables Amazon CloudWatch metrics and web request sample collection.
Sourcepub fn set_visibility_config(self, input: Option<VisibilityConfig>) -> Self
pub fn set_visibility_config(self, input: Option<VisibilityConfig>) -> Self
Defines and enables Amazon CloudWatch metrics and web request sample collection.
Sourcepub fn get_visibility_config(&self) -> &Option<VisibilityConfig>
pub fn get_visibility_config(&self) -> &Option<VisibilityConfig>
Defines and enables Amazon CloudWatch metrics and web request sample collection.
Sourcepub fn lock_token(self, input: impl Into<String>) -> Self
pub fn lock_token(self, input: impl Into<String>) -> Self
A token used for optimistic locking. WAF returns a token to your get and list requests, to mark the state of the entity at the time of the request. To make changes to the entity associated with the token, you provide the token to operations like update and delete. WAF uses the token to ensure that no changes have been made to the entity since you last retrieved it. If a change has been made, the update fails with a WAFOptimisticLockException. If this happens, perform another get, and use the new token returned by that operation.
Sourcepub fn set_lock_token(self, input: Option<String>) -> Self
pub fn set_lock_token(self, input: Option<String>) -> Self
A token used for optimistic locking. WAF returns a token to your get and list requests, to mark the state of the entity at the time of the request. To make changes to the entity associated with the token, you provide the token to operations like update and delete. WAF uses the token to ensure that no changes have been made to the entity since you last retrieved it. If a change has been made, the update fails with a WAFOptimisticLockException. If this happens, perform another get, and use the new token returned by that operation.
Sourcepub fn get_lock_token(&self) -> &Option<String>
pub fn get_lock_token(&self) -> &Option<String>
A token used for optimistic locking. WAF returns a token to your get and list requests, to mark the state of the entity at the time of the request. To make changes to the entity associated with the token, you provide the token to operations like update and delete. WAF uses the token to ensure that no changes have been made to the entity since you last retrieved it. If a change has been made, the update fails with a WAFOptimisticLockException. If this happens, perform another get, and use the new token returned by that operation.
Sourcepub fn custom_response_bodies(
self,
k: impl Into<String>,
v: CustomResponseBody,
) -> Self
pub fn custom_response_bodies( self, k: impl Into<String>, v: CustomResponseBody, ) -> Self
Adds a key-value pair to CustomResponseBodies.
To override the contents of this collection use set_custom_response_bodies.
A map of custom response keys and content bodies. When you create a rule with a block action, you can send a custom response to the web request. You define these for the rule group, and then use them in the rules that you define in the rule group.
For information about customizing web requests and responses, see Customizing web requests and responses in WAF in the WAF Developer Guide.
For information about the limits on count and size for custom request and response settings, see WAF quotas in the WAF Developer Guide.
Sourcepub fn set_custom_response_bodies(
self,
input: Option<HashMap<String, CustomResponseBody>>,
) -> Self
pub fn set_custom_response_bodies( self, input: Option<HashMap<String, CustomResponseBody>>, ) -> Self
A map of custom response keys and content bodies. When you create a rule with a block action, you can send a custom response to the web request. You define these for the rule group, and then use them in the rules that you define in the rule group.
For information about customizing web requests and responses, see Customizing web requests and responses in WAF in the WAF Developer Guide.
For information about the limits on count and size for custom request and response settings, see WAF quotas in the WAF Developer Guide.
Sourcepub fn get_custom_response_bodies(
&self,
) -> &Option<HashMap<String, CustomResponseBody>>
pub fn get_custom_response_bodies( &self, ) -> &Option<HashMap<String, CustomResponseBody>>
A map of custom response keys and content bodies. When you create a rule with a block action, you can send a custom response to the web request. You define these for the rule group, and then use them in the rules that you define in the rule group.
For information about customizing web requests and responses, see Customizing web requests and responses in WAF in the WAF Developer Guide.
For information about the limits on count and size for custom request and response settings, see WAF quotas in the WAF Developer Guide.
Trait Implementations§
Source§impl Clone for UpdateRuleGroupFluentBuilder
impl Clone for UpdateRuleGroupFluentBuilder
Source§fn clone(&self) -> UpdateRuleGroupFluentBuilder
fn clone(&self) -> UpdateRuleGroupFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for UpdateRuleGroupFluentBuilder
impl !RefUnwindSafe for UpdateRuleGroupFluentBuilder
impl Send for UpdateRuleGroupFluentBuilder
impl Sync for UpdateRuleGroupFluentBuilder
impl Unpin for UpdateRuleGroupFluentBuilder
impl !UnwindSafe for UpdateRuleGroupFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§unsafe fn clone_to_uninit(&self, dst: *mut T)
unsafe fn clone_to_uninit(&self, dst: *mut T)
clone_to_uninit)Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);