Struct cairo_vm::with_std::marker::PhantomData

1.0.0 · source ·
pub struct PhantomData<T>
where
    T: ?Sized;
Expand description

Zero-sized type used to mark things that “act like” they own a T.

Adding a PhantomData<T> field to your type tells the compiler that your type acts as though it stores a value of type T, even though it doesn’t really. This information is used when computing certain safety properties.

For a more in-depth explanation of how to use PhantomData<T>, please see the Nomicon.

§A ghastly note 👻👻👻

Though they both have scary names, PhantomData and ‘phantom types’ are related, but not identical. A phantom type parameter is simply a type parameter which is never used. In Rust, this often causes the compiler to complain, and the solution is to add a “dummy” use by way of PhantomData.

§Examples

§Unused lifetime parameters

Perhaps the most common use case for PhantomData is a struct that has an unused lifetime parameter, typically as part of some unsafe code. For example, here is a struct Slice that has two pointers of type *const T, presumably pointing into an array somewhere:

struct Slice<'a, T> {
    start: *const T,
    end: *const T,
}

The intention is that the underlying data is only valid for the lifetime 'a, so Slice should not outlive 'a. However, this intent is not expressed in the code, since there are no uses of the lifetime 'a and hence it is not clear what data it applies to. We can correct this by telling the compiler to act as if the Slice struct contained a reference &'a T:

use std::marker::PhantomData;

struct Slice<'a, T> {
    start: *const T,
    end: *const T,
    phantom: PhantomData<&'a T>,
}

This also in turn infers the lifetime bound T: 'a, indicating that any references in T are valid over the lifetime 'a.

When initializing a Slice you simply provide the value PhantomData for the field phantom:

fn borrow_vec<T>(vec: &Vec<T>) -> Slice<'_, T> {
    let ptr = vec.as_ptr();
    Slice {
        start: ptr,
        end: unsafe { ptr.add(vec.len()) },
        phantom: PhantomData,
    }
}

§Unused type parameters

It sometimes happens that you have unused type parameters which indicate what type of data a struct is “tied” to, even though that data is not actually found in the struct itself. Here is an example where this arises with FFI. The foreign interface uses handles of type *mut () to refer to Rust values of different types. We track the Rust type using a phantom type parameter on the struct ExternalResource which wraps a handle.

use std::marker::PhantomData;
use std::mem;

struct ExternalResource<R> {
   resource_handle: *mut (),
   resource_type: PhantomData<R>,
}

impl<R: ResType> ExternalResource<R> {
    fn new() -> Self {
        let size_of_res = mem::size_of::<R>();
        Self {
            resource_handle: foreign_lib::new(size_of_res),
            resource_type: PhantomData,
        }
    }

    fn do_stuff(&self, param: ParamType) {
        let foreign_params = convert_params(param);
        foreign_lib::do_stuff(self.resource_handle, foreign_params);
    }
}

§Ownership and the drop check

The exact interaction of PhantomData with drop check may change in the future.

Currently, adding a field of type PhantomData<T> indicates that your type owns data of type T in very rare circumstances. This in turn has effects on the Rust compiler’s drop check analysis. For the exact rules, see the drop check documentation.

§Layout

For all T, the following are guaranteed:

  • size_of::<PhantomData<T>>() == 0
  • align_of::<PhantomData<T>>() == 1

Trait Implementations§

source§

impl<T> AsBytes for PhantomData<T>
where T: ?Sized,

source§

fn as_bytes(&self) -> &[u8]

Gets the bytes of this value. Read more
source§

fn as_bytes_mut(&mut self) -> &mut [u8]
where Self: FromBytes,

Gets the bytes of this value mutably. Read more
source§

fn write_to(&self, bytes: &mut [u8]) -> Option<()>

Writes a copy of self to bytes. Read more
source§

fn write_to_prefix(&self, bytes: &mut [u8]) -> Option<()>

Writes a copy of self to the prefix of bytes. Read more
source§

fn write_to_suffix(&self, bytes: &mut [u8]) -> Option<()>

Writes a copy of self to the suffix of bytes. Read more
source§

impl<'de, T> BorrowDecode<'de> for PhantomData<T>

source§

fn borrow_decode<D>(_: &mut D) -> Result<PhantomData<T>, DecodeError>
where D: BorrowDecoder<'de>,

Attempt to decode this type with the given BorrowDecode.
source§

impl<T> CanonicalDeserialize for PhantomData<T>
where T: Send + Sync,

source§

fn deserialize_with_mode<R>( _reader: R, _compress: Compress, _validate: Validate, ) -> Result<PhantomData<T>, SerializationError>
where R: Read,

The general deserialize method that takes in customization flags.
source§

fn deserialize_compressed<R>(reader: R) -> Result<Self, SerializationError>
where R: Read,

source§

fn deserialize_compressed_unchecked<R>( reader: R, ) -> Result<Self, SerializationError>
where R: Read,

source§

fn deserialize_uncompressed<R>(reader: R) -> Result<Self, SerializationError>
where R: Read,

source§

fn deserialize_uncompressed_unchecked<R>( reader: R, ) -> Result<Self, SerializationError>
where R: Read,

source§

impl<T> CanonicalSerialize for PhantomData<T>

source§

fn serialize_with_mode<W>( &self, _writer: W, _compress: Compress, ) -> Result<(), SerializationError>
where W: Write,

The general serialize method that takes in customization flags.
source§

fn serialized_size(&self, _compress: Compress) -> usize

source§

fn serialize_compressed<W>(&self, writer: W) -> Result<(), SerializationError>
where W: Write,

source§

fn compressed_size(&self) -> usize

source§

fn serialize_uncompressed<W>(&self, writer: W) -> Result<(), SerializationError>
where W: Write,

source§

fn uncompressed_size(&self) -> usize

1.0.0 · source§

impl<T> Clone for PhantomData<T>
where T: ?Sized,

source§

fn clone(&self) -> PhantomData<T>

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
1.0.0 · source§

impl<T> Debug for PhantomData<T>
where T: ?Sized,

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
source§

impl<T> Decode for PhantomData<T>

source§

fn decode<D>(_: &mut D) -> Result<PhantomData<T>, DecodeError>
where D: Decoder,

Attempt to decode this type with the given Decode.
1.0.0 · source§

impl<T> Default for PhantomData<T>
where T: ?Sized,

source§

fn default() -> PhantomData<T>

Returns the “default value” for a type. Read more
source§

impl<'de, T> Deserialize<'de> for PhantomData<T>
where T: ?Sized,

source§

fn deserialize<D>( deserializer: D, ) -> Result<PhantomData<T>, <D as Deserializer<'de>>::Error>
where D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer. Read more
source§

impl<'de, T> DeserializeSeed<'de> for PhantomData<T>
where T: Deserialize<'de>,

§

type Value = T

The type produced by using this seed.
source§

fn deserialize<D>( self, deserializer: D, ) -> Result<T, <D as Deserializer<'de>>::Error>
where D: Deserializer<'de>,

Equivalent to the more common Deserialize::deserialize method, except with some initial piece of data (the seed) passed in.
source§

impl<T> Encode for PhantomData<T>

source§

fn encode<E>(&self, _: &mut E) -> Result<(), EncodeError>
where E: Encoder,

Encode a given type.
source§

impl<T> FromBytes for PhantomData<T>
where T: ?Sized,

source§

fn ref_from(bytes: &[u8]) -> Option<&Self>
where Self: Sized,

Interprets the given bytes as a &Self without copying. Read more
source§

fn ref_from_prefix(bytes: &[u8]) -> Option<&Self>
where Self: Sized,

Interprets the prefix of the given bytes as a &Self without copying. Read more
source§

fn ref_from_suffix(bytes: &[u8]) -> Option<&Self>
where Self: Sized,

Interprets the suffix of the given bytes as a &Self without copying. Read more
source§

fn mut_from(bytes: &mut [u8]) -> Option<&mut Self>
where Self: Sized + AsBytes,

Interprets the given bytes as a &mut Self without copying. Read more
source§

fn mut_from_prefix(bytes: &mut [u8]) -> Option<&mut Self>
where Self: Sized + AsBytes,

Interprets the prefix of the given bytes as a &mut Self without copying. Read more
source§

fn mut_from_suffix(bytes: &mut [u8]) -> Option<&mut Self>
where Self: Sized + AsBytes,

Interprets the suffix of the given bytes as a &mut Self without copying. Read more
source§

fn slice_from(bytes: &[u8]) -> Option<&[Self]>
where Self: Sized,

Interprets the given bytes as a &[Self] without copying. Read more
source§

fn slice_from_prefix(bytes: &[u8], count: usize) -> Option<(&[Self], &[u8])>
where Self: Sized,

Interprets the prefix of the given bytes as a &[Self] with length equal to count without copying. Read more
source§

fn slice_from_suffix(bytes: &[u8], count: usize) -> Option<(&[u8], &[Self])>
where Self: Sized,

Interprets the suffix of the given bytes as a &[Self] with length equal to count without copying. Read more
source§

fn mut_slice_from(bytes: &mut [u8]) -> Option<&mut [Self]>
where Self: Sized + AsBytes,

Interprets the given bytes as a &mut [Self] without copying. Read more
source§

fn mut_slice_from_prefix( bytes: &mut [u8], count: usize, ) -> Option<(&mut [Self], &mut [u8])>
where Self: Sized + AsBytes,

Interprets the prefix of the given bytes as a &mut [Self] with length equal to count without copying. Read more
source§

fn mut_slice_from_suffix( bytes: &mut [u8], count: usize, ) -> Option<(&mut [u8], &mut [Self])>
where Self: Sized + AsBytes,

Interprets the suffix of the given bytes as a &mut [Self] with length equal to count without copying. Read more
source§

fn read_from(bytes: &[u8]) -> Option<Self>
where Self: Sized,

Reads a copy of Self from bytes. Read more
source§

fn read_from_prefix(bytes: &[u8]) -> Option<Self>
where Self: Sized,

Reads a copy of Self from the prefix of bytes. Read more
source§

fn read_from_suffix(bytes: &[u8]) -> Option<Self>
where Self: Sized,

Reads a copy of Self from the suffix of bytes. Read more
source§

impl<T> FromZeroes for PhantomData<T>
where T: ?Sized,

source§

fn zero(&mut self)

Overwrites self with zeroes. Read more
source§

fn new_zeroed() -> Self
where Self: Sized,

Creates an instance of Self from zeroed bytes. Read more
1.0.0 · source§

impl<T> Hash for PhantomData<T>
where T: ?Sized,

source§

fn hash<H>(&self, _: &mut H)
where H: Hasher,

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
1.0.0 · source§

impl<T> Ord for PhantomData<T>
where T: ?Sized,

source§

fn cmp(&self, _other: &PhantomData<T>) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 · source§

fn max(self, other: Self) -> Self
where Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · source§

fn min(self, other: Self) -> Self
where Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · source§

fn clamp(self, min: Self, max: Self) -> Self
where Self: Sized + PartialOrd,

Restrict a value to a certain interval. Read more
1.0.0 · source§

impl<T> PartialEq for PhantomData<T>
where T: ?Sized,

source§

fn eq(&self, _other: &PhantomData<T>) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
1.0.0 · source§

impl<T> PartialOrd for PhantomData<T>
where T: ?Sized,

source§

fn partial_cmp(&self, _other: &PhantomData<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · source§

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · source§

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · source§

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · source§

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator. Read more
source§

impl<T> Serialize for PhantomData<T>
where T: ?Sized,

source§

fn serialize<S>( &self, serializer: S, ) -> Result<<S as Serializer>::Ok, <S as Serializer>::Error>
where S: Serializer,

Serialize this value into the given Serde serializer. Read more
source§

impl<T> Valid for PhantomData<T>
where T: Sync,

source§

fn check(&self) -> Result<(), SerializationError>

source§

fn batch_check<'a>( batch: impl Iterator<Item = &'a Self> + Send, ) -> Result<(), SerializationError>
where Self: 'a,

source§

impl<Z> Zeroize for PhantomData<Z>

PhantomData is always zero sized so provide a Zeroize implementation.

source§

fn zeroize(&mut self)

Zero out this object from memory using Rust intrinsics which ensure the zeroization operation is not “optimized away” by the compiler.
1.0.0 · source§

impl<T> Copy for PhantomData<T>
where T: ?Sized,

1.0.0 · source§

impl<T> Eq for PhantomData<T>
where T: ?Sized,

source§

impl<T> Freeze for PhantomData<T>
where T: ?Sized,

source§

impl<T> StructuralPartialEq for PhantomData<T>
where T: ?Sized,

source§

impl<T> Unaligned for PhantomData<T>
where T: ?Sized,

source§

impl<Z> ZeroizeOnDrop for PhantomData<Z>

[PhantomData is always zero sized so provide a ZeroizeOnDrop implementation.

Auto Trait Implementations§

§

impl<T> RefUnwindSafe for PhantomData<T>
where T: RefUnwindSafe + ?Sized,

§

impl<T> Send for PhantomData<T>
where T: Send + ?Sized,

§

impl<T> Sync for PhantomData<T>
where T: Sync + ?Sized,

§

impl<T> Unpin for PhantomData<T>
where T: Unpin + ?Sized,

§

impl<T> UnwindSafe for PhantomData<T>
where T: UnwindSafe + ?Sized,

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> CanonicalSerializeHashExt for T

source§

impl<T> CloneToUninit for T
where T: Clone,

source§

default unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
source§

impl<T> CloneToUninit for T
where T: Copy,

source§

unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
source§

impl<T> Conv for T

source§

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more
source§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

source§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
source§

impl<T> FmtForward for T

source§

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.
source§

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.
source§

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.
source§

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.
source§

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.
source§

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.
source§

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.
source§

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.
source§

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoEither for T

source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

impl<T> Pipe for T
where T: ?Sized,

source§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
where Self: Sized,

Pipes by value. This is generally the method you want to use. Read more
source§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Borrows self and passes that borrow into the pipe function. Read more
source§

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more
source§

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
where Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more
source§

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
where Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more
source§

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
where Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.
source§

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
where Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.
source§

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.
source§

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R, ) -> R
where Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.
source§

impl<T> Same for T

§

type Output = T

Should always be Self
source§

impl<T> Tap for T

source§

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more
source§

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more
source§

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more
source§

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more
source§

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more
source§

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more
source§

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more
source§

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more
source§

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.
source§

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.
source§

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.
source§

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.
source§

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.
source§

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.
source§

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.
source§

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.
source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T> TryConv for T

source§

fn try_conv<T>(self) -> Result<T, Self::Error>
where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

source§

fn vzip(self) -> V

source§

impl<T> DeserializeOwned for T
where T: for<'de> Deserialize<'de>,