# ansiterm-rs
Continuation of the unmaintained [ansi-term](https://github.com/ogham/rust-ansi-term),
a library for controlling colours and formatting, such as red bold text or blue
underlined text, on ANSI terminals.
Big shout-out to its creator [Benjamin Sago](https://github.com/ogham).
# Installation
Disclaimer:
This crate is still in development, and is not yet available on crates.io
#### We promise to keep the API stable, and not break anything that is already working in the original crate.
## Basic usage
There are three main types in this crate that you need to be concerned with: `ANSIString`, `Style`, and `Colour`.
A `Style` holds stylistic information: foreground and background colours, whether the text should be bold, or blinking, or other properties.
The `Colour` enum represents the available colours.
And an `ANSIString` is a string paired with a `Style`.
`Color` is also available as an alias to `Colour`.
To format a string, call the `paint` method on a `Style` or a `Colour`, passing in the string you want to format as the argument.
For example, here’s how to get some red text:
```rust
use ansiterm::Colour::Red;
println!("This is in red: {}", Red.paint("a red string"));
```
It’s important to note that the `paint` method does *not* actually return a string with the ANSI control characters surrounding it.
Instead, it returns an `ANSIString` value that has a `Display` implementation that, when formatted, returns the characters.
This allows strings to be printed with a minimum of `String` allocations being performed behind the scenes.
If you *do* want to get at the escape codes, then you can convert the `ANSIString` to a string as you would any other `Display` value:
```rust
use ansiterm::Colour::Red;
let red_string = Red.paint("a red string").to_string();
```
**Note for Windows 10 users:** On Windows 10, the application must enable ANSI support first:
```rust,ignore
let enabled = ansiterm::enable_ansi_support();
```
## Bold, underline, background, and other styles
For anything more complex than plain foreground colour changes, you need to construct `Style` values themselves, rather than beginning with a `Colour`.
You can do this by chaining methods based on a new `Style`, created with `Style::new()`.
Each method creates a new style that has that specific property set.
For example:
```rust
use ansiterm::Style;
println!("How about some {} and {}?",
Style::new().bold().paint("bold"),
Style::new().underline().paint("underline"));
```
For brevity, these methods have also been implemented for `Colour` values, so you can give your styles a foreground colour without having to begin with an empty `Style` value:
```rust
use ansiterm::Colour::{Blue, Yellow};
println!("Demonstrating {} and {}!",
Blue.bold().paint("blue bold"),
Yellow.underline().paint("yellow underline"));
println!("Yellow on blue: {}", Yellow.on(Blue).paint("wow!"));
```
The complete list of styles you can use are:
`bold`, `dimmed`, `italic`, `underline`, `blink`, `reverse`, `hidden`, and `on` for background colours.
In some cases, you may find it easier to change the foreground on an existing `Style` rather than starting from the appropriate `Colour`.
You can do this using the `fg` method:
```rust
use ansiterm::Style;
use ansiterm::Colour::{Blue, Cyan, Yellow};
println!("Yellow on blue: {}", Style::new().on(Blue).fg(Yellow).paint("yow!"));
println!("Also yellow on blue: {}", Cyan.on(Blue).fg(Yellow).paint("zow!"));
```
You can turn a `Colour` into a `Style` with the `normal` method.
This will produce the exact same `ANSIString` as if you just used the `paint` method on the `Colour` directly, but it’s useful in certain cases: for example, you may have a method that returns `Styles`, and need to represent both the “red bold” and “red, but not bold” styles with values of the same type. The `Style` struct also has a `Default` implementation if you want to have a style with *nothing* set.
```rust
use ansiterm::Style;
use ansiterm::Colour::Red;
Red.normal().paint("yet another red string");
Style::default().paint("a completely regular string");
```
## Extended colours
You can access the extended range of 256 colours by using the `Colour::Fixed` variant, which takes an argument of the colour number to use.
This can be included wherever you would use a `Colour`:
```rust
use ansiterm::Colour::Fixed;
Fixed(134).paint("A sort of light purple");
Fixed(221).on(Fixed(124)).paint("Mustard in the ketchup");
```
The first sixteen of these values are the same as the normal and bold standard colour variants.
There’s nothing stopping you from using these as `Fixed` colours instead, but there’s nothing to be gained by doing so either.
You can also access full 24-bit colour by using the `Colour::RGB` variant, which takes separate `u8` arguments for red, green, and blue:
```rust
use ansiterm::Colour::RGB;
RGB(70, 130, 180).paint("Steel blue");
```
## Combining successive coloured strings
The benefit of writing ANSI escape codes to the terminal is that they *stack*: you do not need to end every coloured string with a reset code if the text that follows it is of a similar style.
For example, if you want to have some blue text followed by some blue bold text, it’s possible to send the ANSI code for blue, followed by the ANSI code for bold, and finishing with a reset code without having to have an extra one between the two strings.
This crate can optimise the ANSI codes that get printed in situations like this, making life easier for your terminal renderer.
The `ANSIStrings` struct takes a slice of several `ANSIString` values, and will iterate over each of them, printing only the codes for the styles that need to be updated as part of its formatting routine.
The following code snippet uses this to enclose a binary number displayed in red bold text inside some red, but not bold, brackets:
```rust
use ansiterm::Colour::Red;
use ansiterm::{ANSIString, ANSIStrings};
let some_value = format!("{:b}", 42);
let strings: &[ANSIString<'static>] = &[
Red.paint("["),
Red.bold().paint(some_value),
Red.paint("]"),
];
println!("Value: {}", ANSIStrings(strings));
```
There are several things to note here.
Firstly, the `paint` method can take *either* an owned `String` or a borrowed `&str`.
Internally, an `ANSIString` holds a copy-on-write (`Cow`) string value to deal with both owned and borrowed strings at the same time.
This is used here to display a `String`, the result of the `format!` call, using the same mechanism as some statically-available `&str` slices.
Secondly, that the `ANSIStrings` value works in the same way as its singular counterpart, with a `Display` implementation that only performs the formatting when required.
## Byte strings
This library also supports formatting `[u8]` byte strings; this supports applications working with text in an unknown encoding.
`Style` and `Colour` support painting `[u8]` values, resulting in an `ANSIByteString`.
This type does not implement `Display`, as it may not contain UTF-8, but it does provide a method `write_to` to write the result to any value that implements `Write`:
```rust
use ansiterm::Colour::Green;
Green.paint("user data".as_bytes()).write_to(&mut std::io::stdout()).unwrap();
```
Similarly, the type `ANSIByteStrings` supports writing a list of `ANSIByteString` values with minimal escape sequences:
```rust
use ansiterm::Colour::Green;
use ansiterm::ANSIByteStrings;
ANSIByteStrings(&[
Green.paint("user data 1\n".as_bytes()),
Green.bold().paint("user data 2\n".as_bytes()),
]).write_to(&mut std::io::stdout()).unwrap();
```