Struct embassy_stm32::peripherals::PB13

pub struct PB13 { /* private fields */ }

PB13 peripheral

Implementations

impl PB13

pub unsafe fn steal() -> Self

Unsafely create an instance of this peripheral out of thin air.

Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations

impl Channel1ComplementaryPin<TIM1> for PB13

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel1ComplementaryPin

impl CkPin<SPI2> for PB13

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CkPin

impl CtsPin<USART3> for PB13

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CtsPin

impl From<PB13> for AnyPin

fn from(x: PB13) -> Self

Converts to this type from the input type.

impl Peripheral for PB13

type P = PB13

Peripheral singleton type

unsafe fn clone_unchecked(&self) -> Self::P

Unsafely clone (duplicate) a peripheral singleton.

fn into_ref<'a>(self) -> PeripheralRef<'a, Self::P>

where Self: 'a,

Convert a value into a PeripheralRef.

impl Pin for PB13

type ExtiChannel = EXTI13

EXTI channel assigned to this pin.

fn pin(&self) -> u8

Number of the pin within the port (0..31)

fn port(&self) -> u8

Port of the pin

fn degrade(self) -> AnyPin

Type-erase (degrade) this pin into an AnyPin.

impl Pin for PB13

fn pin_port(&self) -> u8

fn _pin(&self) -> u8

fn _port(&self) -> u8

fn block(&self) -> Gpio

fn set_high(&self)

Set the output as high.

fn set_low(&self)

Set the output as low.

fn set_as_af(&self, af_num: u8, af_type: AFType)

fn set_as_af_pull(&self, af_num: u8, af_type: AFType, pull: Pull)

fn set_as_analog(&self)

fn set_as_disconnected(&self)

Set the pin as “disconnected”, ie doing nothing and consuming the lowest amount of power possible.

fn set_speed(&self, speed: Speed)

impl SckPin<SPI2> for PB13

fn af_num(&self) -> u8

Get the AF number needed to use this pin as SckPin

impl TXD1Pin<ETH> for PB13

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TXD1Pin

impl TxPin<FDCAN2> for PB13

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TxPin

impl TxPin<UART5> for PB13

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TxPin

impl UlpiD6Pin<USB_OTG_HS> for PB13

fn af_num(&self) -> u8

Get the AF number needed to use this pin as UlpiD6Pin