Enum esp32c3_hal::gpio::OutputSignal

pub enum OutputSignal {
    SPIQ = 0,
    SPID = 1,
    SPIHD = 2,
    SPIWP = 3,
    SPICLK_MUX = 4,
    SPICS0 = 5,
    U0TXD = 6,
    U0RTS = 7,
    U0DTR = 8,
    U1TXD = 9,
    U1RTS = 10,
    U1DTR = 11,
    I2S_MCLK = 12,
    I2SO_BCK = 13,
    I2SO_WS = 14,
    I2SO_SD = 15,
    I2SI_BCK = 16,
    I2SI_WS = 17,
    GPIO_WLAN_PRIO = 18,
    GPIO_WLAN_ACTIVE = 19,
    CPU_GPIO_0 = 28,
    CPU_GPIO_1 = 29,
    CPU_GPIO_2 = 30,
    CPU_GPIO_3 = 31,
    CPU_GPIO_4 = 32,
    CPU_GPIO_5 = 33,
    CPU_GPIO_6 = 34,
    CPU_GPIO_7 = 35,
    USB_JTAG_TCK = 36,
    USB_JTAG_TMS = 37,
    USB_JTAG_TDI = 38,
    USB_JTAG_TDO = 39,
    LEDC_LS_SIG0 = 45,
    LEDC_LS_SIG1 = 46,
    LEDC_LS_SIG2 = 47,
    LEDC_LS_SIG3 = 48,
    LEDC_LS_SIG4 = 49,
    LEDC_LS_SIG5 = 50,
    RMT_SIG_0 = 51,
    RMT_SIG_1 = 52,
    I2CEXT0_SCL = 53,
    I2CEXT0_SDA = 54,
    GPIO_SD0 = 55,
    GPIO_SD1 = 56,
    GPIO_SD2 = 57,
    GPIO_SD3 = 58,
    I2SO_SD1 = 59,
    FSPICLK_MUX = 63,
    FSPIQ = 64,
    FSPID = 65,
    FSPIHD = 66,
    FSPIWP = 67,
    FSPICS0 = 68,
    FSPICS1 = 69,
    FSPICS3 = 70,
    FSPICS2 = 71,
    FSPICS4 = 72,
    FSPICS5 = 73,
    TWAI_TX = 74,
    TWAI_BUS_OFF_ON = 75,
    TWAI_CLKOUT = 76,
    ANT_SEL0 = 89,
    ANT_SEL1 = 90,
    ANT_SEL2 = 91,
    ANT_SEL3 = 92,
    ANT_SEL4 = 93,
    ANT_SEL5 = 94,
    ANT_SEL6 = 95,
    ANT_SEL7 = 96,
    SIG_FUNC_97 = 97,
    SIG_FUNC_98 = 98,
    SIG_FUNC_99 = 99,
    SIG_FUNC_100 = 100,
    CLK_OUT1 = 123,
    CLK_OUT2 = 124,
    CLK_OUT3 = 125,
    SPICS1 = 126,
    USB_JTAG_TRST = 127,
    GPIO = 128,
}

Peripheral output signals for the GPIO mux

Variants

SPIQ = 0

SPID = 1

SPIHD = 2

SPIWP = 3

SPICLK_MUX = 4

SPICS0 = 5

U0TXD = 6

U0RTS = 7

U0DTR = 8

U1TXD = 9

U1RTS = 10

U1DTR = 11

I2S_MCLK = 12

I2SO_BCK = 13

I2SO_WS = 14

I2SO_SD = 15

I2SI_BCK = 16

I2SI_WS = 17

GPIO_WLAN_PRIO = 18

GPIO_WLAN_ACTIVE = 19

CPU_GPIO_0 = 28

CPU_GPIO_1 = 29

CPU_GPIO_2 = 30

CPU_GPIO_3 = 31

CPU_GPIO_4 = 32

CPU_GPIO_5 = 33

CPU_GPIO_6 = 34

CPU_GPIO_7 = 35

USB_JTAG_TCK = 36

USB_JTAG_TMS = 37

USB_JTAG_TDI = 38

USB_JTAG_TDO = 39

LEDC_LS_SIG0 = 45

LEDC_LS_SIG1 = 46

LEDC_LS_SIG2 = 47

LEDC_LS_SIG3 = 48

LEDC_LS_SIG4 = 49

LEDC_LS_SIG5 = 50

RMT_SIG_0 = 51

RMT_SIG_1 = 52

I2CEXT0_SCL = 53

I2CEXT0_SDA = 54

GPIO_SD0 = 55

GPIO_SD1 = 56

GPIO_SD2 = 57

GPIO_SD3 = 58

I2SO_SD1 = 59

FSPICLK_MUX = 63

FSPIQ = 64

FSPID = 65

FSPIHD = 66

FSPIWP = 67

FSPICS0 = 68

FSPICS1 = 69

FSPICS3 = 70

FSPICS2 = 71

FSPICS4 = 72

FSPICS5 = 73

TWAI_TX = 74

TWAI_BUS_OFF_ON = 75

TWAI_CLKOUT = 76

ANT_SEL0 = 89

ANT_SEL1 = 90

ANT_SEL2 = 91

ANT_SEL3 = 92

ANT_SEL4 = 93

ANT_SEL5 = 94

ANT_SEL6 = 95

ANT_SEL7 = 96

SIG_FUNC_97 = 97

SIG_FUNC_98 = 98

SIG_FUNC_99 = 99

SIG_FUNC_100 = 100

CLK_OUT1 = 123

CLK_OUT2 = 124

CLK_OUT3 = 125

SPICS1 = 126

USB_JTAG_TRST = 127

GPIO = 128

Trait Implementations

impl Clone for OutputSignal

fn clone(&self) -> OutputSignal

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl PartialEq for OutputSignal

fn eq(&self, other: &OutputSignal) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for OutputSignal

impl StructuralPartialEq for OutputSignal