pub struct Checked<Tx: IntoChecked> { /* private fields */ }
Expand description

The type describes that the inner transaction was already checked.

All fields are private, and there is no constructor, so it is impossible to create the instance of Checked outside the fuel-tx crate.

The inner data is immutable to prevent modification to invalidate the checking.

If you need to modify an inner state, you need to get inner values (via the Into<(Tx, Tx ::Metadata)> trait), modify them and check again.

Dev note: Avoid serde serialization of this type.

Since checked tx would need to be re-validated on deserialization anyways, it’s cleaner to redo the tx check.

Implementations§

source§

impl<Tx: IntoChecked> Checked<Tx>

source

pub fn transaction(&self) -> &Tx

Returns reference on inner transaction.

source

pub fn metadata(&self) -> &Tx::Metadata

Returns the metadata generated during the check for transaction.

source

pub fn checks(&self) -> &Checks

Returns the bitmask of all passed checks.

source

pub fn check_signatures(self, chain_id: &ChainId) -> Result<Self, CheckError>

Performs check of signatures, if not yet done.

source§

impl<Tx: IntoChecked + UniqueIdentifier> Checked<Tx>

source

pub fn id(&self) -> TxId

Returns the transaction ID from the computed metadata

Trait Implementations§

source§

impl<Tx: IntoChecked> AsRef<Tx> for Checked<Tx>

source§

fn as_ref(&self) -> &Tx

Converts this type into a shared reference of the (usually inferred) input type.
source§

impl<Tx: IntoChecked> Borrow<Tx> for Checked<Tx>

source§

fn borrow(&self) -> &Tx

Immutably borrows from an owned value. Read more
source§

impl CheckPredicates for Checked<Mint>

source§

fn check_predicates( self, _params: &CheckPredicateParams ) -> Result<Self, CheckError>

Performs predicates verification of the transaction.
source§

fn check_predicates_async<'life0, 'async_trait, E>( self, _params: &'life0 CheckPredicateParams ) -> Pin<Box<dyn Future<Output = Result<Self, CheckError>> + Send + 'async_trait>>where E: 'async_trait + ParallelExecutor, Self: 'async_trait, 'life0: 'async_trait,

Performs predicates verification of the transaction in parallel.
source§

impl CheckPredicates for Checked<Transaction>

source§

fn check_predicates( self, params: &CheckPredicateParams ) -> Result<Self, CheckError>

Performs predicates verification of the transaction.
source§

fn check_predicates_async<'life0, 'async_trait, E>( self, params: &'life0 CheckPredicateParams ) -> Pin<Box<dyn Future<Output = Result<Self, CheckError>> + Send + 'async_trait>>where E: ParallelExecutor + 'async_trait, Self: 'async_trait, 'life0: 'async_trait,

Performs predicates verification of the transaction in parallel.
source§

impl<Tx> CheckPredicates for Checked<Tx>where Tx: ExecutableTransaction + Send + Sync + 'static, <Tx as IntoChecked>::Metadata: CheckedMetadata + Send + Sync,

source§

fn check_predicates( self, params: &CheckPredicateParams ) -> Result<Self, CheckError>

Performs predicates verification of the transaction.
source§

fn check_predicates_async<'life0, 'async_trait, E>( self, params: &'life0 CheckPredicateParams ) -> Pin<Box<dyn Future<Output = Result<Self, CheckError>> + Send + 'async_trait>>where E: ParallelExecutor + 'async_trait, Self: 'async_trait, 'life0: 'async_trait,

Performs predicates verification of the transaction in parallel.
source§

impl<Tx: Clone + IntoChecked> Clone for Checked<Tx>where Tx::Metadata: Clone,

source§

fn clone(&self) -> Checked<Tx>

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl<Tx: Debug + IntoChecked> Debug for Checked<Tx>where Tx::Metadata: Debug,

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl From<Checked<Create>> for CheckedTransaction

source§

fn from(checked: Checked<Create>) -> Self

Converts to this type from the input type.
source§

impl From<Checked<Mint>> for CheckedTransaction

source§

fn from(checked: Checked<Mint>) -> Self

Converts to this type from the input type.
source§

impl From<Checked<Script>> for CheckedTransaction

source§

fn from(checked: Checked<Script>) -> Self

Converts to this type from the input type.
source§

impl From<Checked<Transaction>> for CheckedTransaction

source§

fn from(checked: Checked<Transaction>) -> Self

Converts to this type from the input type.
source§

impl<Tx: IntoChecked> From<Checked<Tx>> for (Tx, Tx::Metadata)

source§

fn from(checked: Checked<Tx>) -> Self

Converts to this type from the input type.
source§

impl From<CheckedTransaction> for Checked<Transaction>

source§

fn from(checked: CheckedTransaction) -> Self

Converts to this type from the input type.
source§

impl<Tx: Hash + IntoChecked> Hash for Checked<Tx>where Tx::Metadata: Hash,

source§

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
source§

impl<Tx: PartialEq + IntoChecked> PartialEq<Checked<Tx>> for Checked<Tx>where Tx::Metadata: PartialEq,

source§

fn eq(&self, other: &Checked<Tx>) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl<Tx: Eq + IntoChecked> Eq for Checked<Tx>where Tx::Metadata: Eq,

source§

impl<Tx: IntoChecked> StructuralEq for Checked<Tx>

source§

impl<Tx: IntoChecked> StructuralPartialEq for Checked<Tx>

Auto Trait Implementations§

§

impl<Tx> RefUnwindSafe for Checked<Tx>where Tx: RefUnwindSafe, <Tx as IntoChecked>::Metadata: RefUnwindSafe,

§

impl<Tx> Send for Checked<Tx>where Tx: Send, <Tx as IntoChecked>::Metadata: Send,

§

impl<Tx> Sync for Checked<Tx>where Tx: Sync, <Tx as IntoChecked>::Metadata: Sync,

§

impl<Tx> Unpin for Checked<Tx>where Tx: Unpin, <Tx as IntoChecked>::Metadata: Unpin,

§

impl<Tx> UnwindSafe for Checked<Tx>where Tx: UnwindSafe, <Tx as IntoChecked>::Metadata: UnwindSafe,

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> AnyDebug for Twhere T: Any + Debug,

source§

fn as_any_ref(&self) -> &(dyn Any + 'static)

Returns a reference to the underlying type as Any.
§

impl<A, T> AsBits<T> for Awhere A: AsRef<[T]>, T: BitStore,

§

fn as_bits<O>(&self) -> &BitSlice<T, O> where O: BitOrder,

Views self as an immutable bit-slice region with the O ordering.
§

fn try_as_bits<O>(&self) -> Result<&BitSlice<T, O>, BitSpanError<T>>where O: BitOrder,

Attempts to view self as an immutable bit-slice region with the O ordering. Read more
§

impl<T> Base32Len for Twhere T: AsRef<[u8]>,

§

fn base32_len(&self) -> usize

Calculate the base32 serialized length
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
§

impl<T> CheckBase32<Vec<u5, Global>> for Twhere T: AsRef<[u8]>,

§

type Err = Error

Error type if conversion fails
§

fn check_base32( self ) -> Result<Vec<u5, Global>, <T as CheckBase32<Vec<u5, Global>>>::Err>

Check if all values are in range and return array-like struct of u5 values
§

impl<T> Conv for T

§

fn conv<T>(self) -> Twhere Self: Into<T>,

Converts self into T using Into<T>. Read more
source§

impl<Q, K> Equivalent<K> for Qwhere Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

source§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
source§

impl<Q, K> Equivalent<K> for Qwhere Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

source§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
§

impl<T> FmtForward for T

§

fn fmt_binary(self) -> FmtBinary<Self>where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.
§

fn fmt_display(self) -> FmtDisplay<Self>where Self: Display,

Causes self to use its Display implementation when Debug-formatted.
§

fn fmt_lower_exp(self) -> FmtLowerExp<Self>where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.
§

fn fmt_lower_hex(self) -> FmtLowerHex<Self>where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.
§

fn fmt_octal(self) -> FmtOctal<Self>where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.
§

fn fmt_pointer(self) -> FmtPointer<Self>where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.
§

fn fmt_upper_exp(self) -> FmtUpperExp<Self>where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.
§

fn fmt_upper_hex(self) -> FmtUpperHex<Self>where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.
§

fn fmt_list(self) -> FmtList<Self>where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for Twhere U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

§

impl<T> Pipe for Twhere T: ?Sized,

§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere Self: Sized,

Pipes by value. This is generally the method you want to use. Read more
§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere R: 'a,

Borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> Rwhere Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more
§

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R ) -> Rwhere Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more
§

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> Rwhere Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.
§

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> Rwhere Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.
§

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> Rwhere Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.
§

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R ) -> Rwhere Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.
source§

impl<T> Same<T> for T

§

type Output = T

Should always be Self
source§

impl<T> StorageAsMut for T

source§

fn storage<Type>(&mut self) -> StorageMut<'_, Self, Type>where Type: Mappable,

source§

fn storage_as_mut<Type>(&mut self) -> StorageMut<'_, Self, Type>where Type: Mappable,

source§

impl<T> StorageAsRef for T

source§

fn storage<Type>(&self) -> StorageRef<'_, Self, Type>where Type: Mappable,

source§

fn storage_as_ref<Type>(&self) -> StorageRef<'_, Self, Type>where Type: Mappable,

§

impl<T> Tap for T

§

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more
§

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more
§

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Selfwhere Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more
§

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more
§

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Selfwhere Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more
§

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more
§

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Selfwhere Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more
§

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more
§

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.
§

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.
§

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Selfwhere Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.
§

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.
§

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Selfwhere Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.
§

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.
§

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Selfwhere Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.
§

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.
§

impl<T> ToBase32 for Twhere T: AsRef<[u8]>,

§

fn write_base32<W>(&self, writer: &mut W) -> Result<(), <W as WriteBase32>::Err>where W: WriteBase32,

Encode as base32 and write it to the supplied writer Implementations shouldn’t allocate.
§

fn to_base32(&self) -> Vec<u5, Global>

Convert Self to base32 vector
source§

impl<T> ToHex for Twhere T: AsRef<[u8]>,

source§

fn encode_hex<U>(&self) -> Uwhere U: FromIterator<char>,

Encode the hex strict representing self into the result. Lower case letters are used (e.g. f9b4ca)
source§

fn encode_hex_upper<U>(&self) -> Uwhere U: FromIterator<char>,

Encode the hex strict representing self into the result. Upper case letters are used (e.g. F9B4CA)
source§

impl<T> ToOwned for Twhere T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
§

impl<T> TryConv for T

§

fn try_conv<T>(self) -> Result<T, Self::Error>where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more
source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<V, T> VZip<V> for Twhere V: MultiLane<T>,

§

fn vzip(self) -> V