Struct gix_index::entry::Flags

pub struct Flags(/* private fields */);

In-memory flags.

Notably, not all of these will be persisted but can be used to aid all kinds of operations.

Implementations

impl Flags

pub const PATH_LEN: Self = _

The mask to obtain the length of the path associated with this entry, up to 4095 characters without extension.

pub const STAGE_MASK: Self = _

The mask to apply to obtain the stage number of an entry, encoding three value: 0 = base, 1 = ours, 2 = theirs.

pub const EXTENDED: Self = _

If set, additional bits need to be written to storage.

pub const ASSUME_VALID: Self = _

If set, the entry be assumed to match with the version on the working tree, as a way to avoid lstat() checks.

pub const UPDATE: Self = _

Indicates that an entry needs to be updated as it’s in-memory representation doesn’t match what’s on disk.

pub const REMOVE: Self = _

Indicates an entry should be removed - this typically happens during writing, by simply skipping over them.

pub const UPTODATE: Self = _

Indicates that an entry is known to be up-to-date.

pub const ADDED: Self = _

Only temporarily used by unpack_trees() (in C).

pub const HASHED: Self = _

Whether an up-to-date object hash exists for the entry.

pub const FSMONITOR_VALID: Self = _

Set if the filesystem monitor is valid.

pub const WORKTREE_REMOVE: Self = _

Remove in work directory

pub const CONFLICTED: Self = _

Set to indicate the entry exists in multiple stages at once due to conflicts.

pub const UNPACKED: Self = _

Indicates that the entry was already turned into a tree.

pub const NEW_SKIP_WORKTREE: Self = _

Only temporarily used by unpack_trees() (in C)

pub const PATHSPEC_MATCHED: Self = _

temporarily mark paths matched by a path spec

pub const UPDATE_IN_BASE: Self = _

When the index is split, this indicates the entry is up-to-date in the shared portion of the index.

pub const STRIP_NAME: Self = _

Indicates the entry name is present in the base/shared index, and thus doesn’t have to be stored in this one.

pub const INTENT_TO_ADD: Self = _

Created with git add --intent-to-add to mark empty entries that have their counter-part in the worktree, but not yet in the object database.

pub const SKIP_WORKTREE: Self = _

Stored at rest

pub const EXTENDED_2: Self = _

For future extension

impl Flags

pub const fn empty() -> Self

Get a flags value with all bits unset.

pub const fn all() -> Self

Get a flags value with all known bits set.

pub const fn bits(&self) -> u32

Get the underlying bits value.

The returned value is exactly the bits set in this flags value.

pub const fn from_bits(bits: u32) -> Option<Self>

Convert from a bits value.

This method will return None if any unknown bits are set.

pub const fn from_bits_truncate(bits: u32) -> Self

Convert from a bits value, unsetting any unknown bits.

pub const fn from_bits_retain(bits: u32) -> Self

Convert from a bits value exactly.

pub fn from_name(name: &str) -> Option<Self>

Get a flags value with the bits of a flag with the given name set.

This method will return None if name is empty or doesn’t correspond to any named flag.

pub const fn is_empty(&self) -> bool

Whether all bits in this flags value are unset.

pub const fn is_all(&self) -> bool

Whether all known bits in this flags value are set.

pub const fn intersects(&self, other: Self) -> bool

Whether any set bits in a source flags value are also set in a target flags value.

pub const fn contains(&self, other: Self) -> bool

Whether all set bits in a source flags value are also set in a target flags value.

pub fn insert(&mut self, other: Self)

The bitwise or (|) of the bits in two flags values.

pub fn remove(&mut self, other: Self)

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. remove won’t truncate other, but the ! operator will.

pub fn toggle(&mut self, other: Self)

The bitwise exclusive-or (^) of the bits in two flags values.

pub fn set(&mut self, other: Self, value: bool)

Call insert when value is true or remove when value is false.

pub const fn intersection(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

pub const fn union(self, other: Self) -> Self

The bitwise or (|) of the bits in two flags values.

pub const fn difference(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

pub const fn symmetric_difference(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

pub const fn complement(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

impl Flags

pub const fn iter(&self) -> Iter<Flags>

Yield a set of contained flags values.

Each yielded flags value will correspond to a defined named flag. Any unknown bits will be yielded together as a final flags value.

pub const fn iter_names(&self) -> IterNames<Flags>

Yield a set of contained named flags values.

This method is like iter, except only yields bits in contained named flags. Any unknown bits, or bits not corresponding to a contained flag will not be yielded.

impl Flags

pub fn stage(&self) -> Stage

Return the stage as extracted from the bits of this instance.

pub fn stage_raw(&self) -> u32

Return an entry’s stage as raw number between 0 and 4. Possible values are:

• 0 = no conflict,
• 1 = base,
• 2 = ours,
• 3 = theirs

pub fn to_storage(self) -> Flags

Transform ourselves to a storage representation to keep all flags which are to be persisted, skipping all extended flags. Note that the caller has to check for the EXTENDED bit to be present and write extended flags as well if so.

Trait Implementations

impl Binary for Flags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl BitAnd for Flags

fn bitand(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

type Output = Flags

The resulting type after applying the & operator.

impl BitAndAssign for Flags

fn bitand_assign(&mut self, other: Self)

The bitwise and (&) of the bits in two flags values.

impl BitOr for Flags

fn bitor(self, other: Flags) -> Self

The bitwise or (|) of the bits in two flags values.

type Output = Flags

The resulting type after applying the | operator.

impl BitOrAssign for Flags

fn bitor_assign(&mut self, other: Self)

The bitwise or (|) of the bits in two flags values.

impl BitXor for Flags

fn bitxor(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

type Output = Flags

The resulting type after applying the ^ operator.

impl BitXorAssign for Flags

fn bitxor_assign(&mut self, other: Self)

The bitwise exclusive-or (^) of the bits in two flags values.

impl Clone for Flags

fn clone(&self) -> Flags

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Flags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Extend<Flags> for Flags

fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)

The bitwise or (|) of the bits in each flags value.

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl Flags for Flags

const FLAGS: &'static [Flag<Flags>] = _

The set of defined flags.

type Bits = u32

The underlying bits type.

fn bits(&self) -> u32

Get the underlying bits value.

fn from_bits_retain(bits: u32) -> Flags

Convert from a bits value exactly.

fn empty() -> Self

Get a flags value with all bits unset.

fn all() -> Self

Get a flags value with all known bits set.

fn from_bits(bits: Self::Bits) -> Option<Self>

Convert from a bits value.

fn from_bits_truncate(bits: Self::Bits) -> Self

Convert from a bits value, unsetting any unknown bits.

fn from_name(name: &str) -> Option<Self>

Get a flags value with the bits of a flag with the given name set.

fn iter(&self) -> Iter<Self>

Yield a set of contained flags values.

fn iter_names(&self) -> IterNames<Self>

Yield a set of contained named flags values.

fn is_empty(&self) -> bool

Whether all bits in this flags value are unset.

fn is_all(&self) -> bool

Whether all known bits in this flags value are set.

fn intersects(&self, other: Self) -> bool

where Self: Sized,

Whether any set bits in a source flags value are also set in a target flags value.

fn contains(&self, other: Self) -> bool

where Self: Sized,

Whether all set bits in a source flags value are also set in a target flags value.

fn insert(&mut self, other: Self)

where Self: Sized,

The bitwise or (|) of the bits in two flags values.

fn remove(&mut self, other: Self)

where Self: Sized,

The intersection of a source flags value with the complement of a target flags value (&!).

fn toggle(&mut self, other: Self)

where Self: Sized,

The bitwise exclusive-or (^) of the bits in two flags values.

fn set(&mut self, other: Self, value: bool)

where Self: Sized,

Call Flags::insert when value is true or Flags::remove when value is false.

fn intersection(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

fn union(self, other: Self) -> Self

The bitwise or (|) of the bits in two flags values.

fn difference(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

fn symmetric_difference(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

fn complement(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

impl FromIterator<Flags> for Flags

fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self

The bitwise or (|) of the bits in each flags value.

impl IntoIterator for Flags

type Item = Flags

The type of the elements being iterated over.

type IntoIter = Iter<Flags>

Which kind of iterator are we turning this into?

fn into_iter(self) -> Self::IntoIter

Creates an iterator from a value.

impl LowerHex for Flags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Not for Flags

fn not(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

type Output = Flags

The resulting type after applying the ! operator.

impl Octal for Flags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq for Flags

fn eq(&self, other: &Flags) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PublicFlags for Flags

type Primitive = u32

The type of the underlying storage.

type Internal = InternalBitFlags

The type of the internal field on the generated flags type.

impl Sub for Flags

fn sub(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

type Output = Flags

The resulting type after applying the - operator.

impl SubAssign for Flags

fn sub_assign(&mut self, other: Self)

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

impl UpperHex for Flags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Copy for Flags

impl Eq for Flags

impl StructuralPartialEq for Flags