#[repr(C)]pub struct DVec4 {
pub x: f64,
pub y: f64,
pub z: f64,
pub w: f64,
}
Expand description
A 4-dimensional vector.
Fields§
§x: f64
§y: f64
§z: f64
§w: f64
Implementations§
source§impl DVec4
impl DVec4
sourcepub fn select(mask: BVec4, if_true: Self, if_false: Self) -> Self
pub fn select(mask: BVec4, if_true: Self, if_false: Self) -> Self
Creates a vector from the elements in if_true
and if_false
, selecting which to use
for each element of self
.
A true element in the mask uses the corresponding element from if_true
, and false
uses the element from if_false
.
sourcepub const fn from_array(a: [f64; 4]) -> Self
pub const fn from_array(a: [f64; 4]) -> Self
Creates a new vector from an array.
sourcepub const fn from_slice(slice: &[f64]) -> Self
pub const fn from_slice(slice: &[f64]) -> Self
Creates a vector from the first 4 values in slice
.
Panics
Panics if slice
is less than 4 elements long.
sourcepub fn write_to_slice(self, slice: &mut [f64])
pub fn write_to_slice(self, slice: &mut [f64])
Writes the elements of self
to the first 4 elements in slice
.
Panics
Panics if slice
is less than 4 elements long.
sourcepub fn truncate(self) -> DVec3
pub fn truncate(self) -> DVec3
Creates a 2D vector from the x
, y
and z
elements of self
, discarding w
.
Truncation to DVec3
may also be performed by using self.xyz()
or DVec3::from()
.
sourcepub fn dot_into_vec(self, rhs: Self) -> Self
pub fn dot_into_vec(self, rhs: Self) -> Self
Returns a vector where every component is the dot product of self
and rhs
.
sourcepub fn min(self, rhs: Self) -> Self
pub fn min(self, rhs: Self) -> Self
Returns a vector containing the minimum values for each element of self
and rhs
.
In other words this computes [self.x.min(rhs.x), self.y.min(rhs.y), ..]
.
sourcepub fn max(self, rhs: Self) -> Self
pub fn max(self, rhs: Self) -> Self
Returns a vector containing the maximum values for each element of self
and rhs
.
In other words this computes [self.x.max(rhs.x), self.y.max(rhs.y), ..]
.
sourcepub fn clamp(self, min: Self, max: Self) -> Self
pub fn clamp(self, min: Self, max: Self) -> Self
Component-wise clamping of values, similar to f64::clamp
.
Each element in min
must be less-or-equal to the corresponding element in max
.
Panics
Will panic if min
is greater than max
when glam_assert
is enabled.
sourcepub fn min_element(self) -> f64
pub fn min_element(self) -> f64
Returns the horizontal minimum of self
.
In other words this computes min(x, y, ..)
.
sourcepub fn max_element(self) -> f64
pub fn max_element(self) -> f64
Returns the horizontal maximum of self
.
In other words this computes max(x, y, ..)
.
sourcepub fn cmpeq(self, rhs: Self) -> BVec4
pub fn cmpeq(self, rhs: Self) -> BVec4
Returns a vector mask containing the result of a ==
comparison for each element of
self
and rhs
.
In other words, this computes [self.x == rhs.x, self.y == rhs.y, ..]
for all
elements.
sourcepub fn cmpne(self, rhs: Self) -> BVec4
pub fn cmpne(self, rhs: Self) -> BVec4
Returns a vector mask containing the result of a !=
comparison for each element of
self
and rhs
.
In other words this computes [self.x != rhs.x, self.y != rhs.y, ..]
for all
elements.
sourcepub fn cmpge(self, rhs: Self) -> BVec4
pub fn cmpge(self, rhs: Self) -> BVec4
Returns a vector mask containing the result of a >=
comparison for each element of
self
and rhs
.
In other words this computes [self.x >= rhs.x, self.y >= rhs.y, ..]
for all
elements.
sourcepub fn cmpgt(self, rhs: Self) -> BVec4
pub fn cmpgt(self, rhs: Self) -> BVec4
Returns a vector mask containing the result of a >
comparison for each element of
self
and rhs
.
In other words this computes [self.x > rhs.x, self.y > rhs.y, ..]
for all
elements.
sourcepub fn cmple(self, rhs: Self) -> BVec4
pub fn cmple(self, rhs: Self) -> BVec4
Returns a vector mask containing the result of a <=
comparison for each element of
self
and rhs
.
In other words this computes [self.x <= rhs.x, self.y <= rhs.y, ..]
for all
elements.
sourcepub fn cmplt(self, rhs: Self) -> BVec4
pub fn cmplt(self, rhs: Self) -> BVec4
Returns a vector mask containing the result of a <
comparison for each element of
self
and rhs
.
In other words this computes [self.x < rhs.x, self.y < rhs.y, ..]
for all
elements.
sourcepub fn abs(self) -> Self
pub fn abs(self) -> Self
Returns a vector containing the absolute value of each element of self
.
sourcepub fn signum(self) -> Self
pub fn signum(self) -> Self
Returns a vector with elements representing the sign of self
.
1.0
if the number is positive,+0.0
orINFINITY
-1.0
if the number is negative,-0.0
orNEG_INFINITY
NAN
if the number isNAN
sourcepub fn copysign(self, rhs: Self) -> Self
pub fn copysign(self, rhs: Self) -> Self
Returns a vector with signs of rhs
and the magnitudes of self
.
sourcepub fn is_negative_bitmask(self) -> u32
pub fn is_negative_bitmask(self) -> u32
Returns a bitmask with the lowest 4 bits set to the sign bits from the elements of self
.
A negative element results in a 1
bit and a positive element in a 0
bit. Element x
goes
into the first lowest bit, element y
into the second, etc.
sourcepub fn is_finite(self) -> bool
pub fn is_finite(self) -> bool
Returns true
if, and only if, all elements are finite. If any element is either
NaN
, positive or negative infinity, this will return false
.
sourcepub fn is_nan_mask(self) -> BVec4
pub fn is_nan_mask(self) -> BVec4
Performs is_nan
on each element of self, returning a vector mask of the results.
In other words, this computes [x.is_nan(), y.is_nan(), z.is_nan(), w.is_nan()]
.
sourcepub fn length_squared(self) -> f64
pub fn length_squared(self) -> f64
Computes the squared length of self
.
This is faster than length()
as it avoids a square root operation.
sourcepub fn length_recip(self) -> f64
pub fn length_recip(self) -> f64
Computes 1.0 / length()
.
For valid results, self
must not be of length zero.
sourcepub fn distance(self, rhs: Self) -> f64
pub fn distance(self, rhs: Self) -> f64
Computes the Euclidean distance between two points in space.
sourcepub fn distance_squared(self, rhs: Self) -> f64
pub fn distance_squared(self, rhs: Self) -> f64
Compute the squared euclidean distance between two points in space.
sourcepub fn normalize(self) -> Self
pub fn normalize(self) -> Self
Returns self
normalized to length 1.0.
For valid results, self
must not be of length zero, nor very close to zero.
See also Self::try_normalize
and Self::normalize_or_zero
.
Panics
Will panic if self
is zero length when glam_assert
is enabled.
sourcepub fn try_normalize(self) -> Option<Self>
pub fn try_normalize(self) -> Option<Self>
Returns self
normalized to length 1.0 if possible, else returns None
.
In particular, if the input is zero (or very close to zero), or non-finite,
the result of this operation will be None
.
See also Self::normalize_or_zero
.
sourcepub fn normalize_or_zero(self) -> Self
pub fn normalize_or_zero(self) -> Self
Returns self
normalized to length 1.0 if possible, else returns zero.
In particular, if the input is zero (or very close to zero), or non-finite, the result of this operation will be zero.
See also Self::try_normalize
.
sourcepub fn is_normalized(self) -> bool
pub fn is_normalized(self) -> bool
Returns whether self
is length 1.0
or not.
Uses a precision threshold of 1e-6
.
sourcepub fn project_onto(self, rhs: Self) -> Self
pub fn project_onto(self, rhs: Self) -> Self
Returns the vector projection of self
onto rhs
.
rhs
must be of non-zero length.
Panics
Will panic if rhs
is zero length when glam_assert
is enabled.
sourcepub fn reject_from(self, rhs: Self) -> Self
pub fn reject_from(self, rhs: Self) -> Self
Returns the vector rejection of self
from rhs
.
The vector rejection is the vector perpendicular to the projection of self
onto
rhs
, in rhs words the result of self - self.project_onto(rhs)
.
rhs
must be of non-zero length.
Panics
Will panic if rhs
has a length of zero when glam_assert
is enabled.
sourcepub fn project_onto_normalized(self, rhs: Self) -> Self
pub fn project_onto_normalized(self, rhs: Self) -> Self
Returns the vector projection of self
onto rhs
.
rhs
must be normalized.
Panics
Will panic if rhs
is not normalized when glam_assert
is enabled.
sourcepub fn reject_from_normalized(self, rhs: Self) -> Self
pub fn reject_from_normalized(self, rhs: Self) -> Self
Returns the vector rejection of self
from rhs
.
The vector rejection is the vector perpendicular to the projection of self
onto
rhs
, in rhs words the result of self - self.project_onto(rhs)
.
rhs
must be normalized.
Panics
Will panic if rhs
is not normalized when glam_assert
is enabled.
sourcepub fn round(self) -> Self
pub fn round(self) -> Self
Returns a vector containing the nearest integer to a number for each element of self
.
Round half-way cases away from 0.0.
sourcepub fn floor(self) -> Self
pub fn floor(self) -> Self
Returns a vector containing the largest integer less than or equal to a number for each
element of self
.
sourcepub fn ceil(self) -> Self
pub fn ceil(self) -> Self
Returns a vector containing the smallest integer greater than or equal to a number for
each element of self
.
sourcepub fn fract(self) -> Self
pub fn fract(self) -> Self
Returns a vector containing the fractional part of the vector, e.g. self - self.floor()
.
Note that this is fast but not precise for large numbers.
sourcepub fn exp(self) -> Self
pub fn exp(self) -> Self
Returns a vector containing e^self
(the exponential function) for each element of
self
.
sourcepub fn powf(self, n: f64) -> Self
pub fn powf(self, n: f64) -> Self
Returns a vector containing each element of self
raised to the power of n
.
sourcepub fn recip(self) -> Self
pub fn recip(self) -> Self
Returns a vector containing the reciprocal 1.0/n
of each element of self
.
sourcepub fn lerp(self, rhs: Self, s: f64) -> Self
pub fn lerp(self, rhs: Self, s: f64) -> Self
Performs a linear interpolation between self
and rhs
based on the value s
.
When s
is 0.0
, the result will be equal to self
. When s
is 1.0
, the result
will be equal to rhs
. When s
is outside of range [0, 1]
, the result is linearly
extrapolated.
sourcepub fn abs_diff_eq(self, rhs: Self, max_abs_diff: f64) -> bool
pub fn abs_diff_eq(self, rhs: Self, max_abs_diff: f64) -> bool
Returns true if the absolute difference of all elements between self
and rhs
is
less than or equal to max_abs_diff
.
This can be used to compare if two vectors contain similar elements. It works best when
comparing with a known value. The max_abs_diff
that should be used used depends on
the values being compared against.
For more see comparing floating point numbers.
sourcepub fn clamp_length(self, min: f64, max: f64) -> Self
pub fn clamp_length(self, min: f64, max: f64) -> Self
Returns a vector with a length no less than min
and no more than max
Panics
Will panic if min
is greater than max
when glam_assert
is enabled.
sourcepub fn clamp_length_max(self, max: f64) -> Self
pub fn clamp_length_max(self, max: f64) -> Self
Returns a vector with a length no more than max
sourcepub fn clamp_length_min(self, min: f64) -> Self
pub fn clamp_length_min(self, min: f64) -> Self
Returns a vector with a length no less than min
sourcepub fn mul_add(self, a: Self, b: Self) -> Self
pub fn mul_add(self, a: Self, b: Self) -> Self
Fused multiply-add. Computes (self * a) + b
element-wise with only one rounding
error, yielding a more accurate result than an unfused multiply-add.
Using mul_add
may be more performant than an unfused multiply-add if the target
architecture has a dedicated fma CPU instruction. However, this is not always true,
and will be heavily dependant on designing algorithms with specific target hardware in
mind.
Trait Implementations§
source§impl AddAssign<DVec4> for DVec4
impl AddAssign<DVec4> for DVec4
source§fn add_assign(&mut self, rhs: Self)
fn add_assign(&mut self, rhs: Self)
+=
operation. Read moresource§impl AddAssign<f64> for DVec4
impl AddAssign<f64> for DVec4
source§fn add_assign(&mut self, rhs: f64)
fn add_assign(&mut self, rhs: f64)
+=
operation. Read moresource§impl DivAssign<DVec4> for DVec4
impl DivAssign<DVec4> for DVec4
source§fn div_assign(&mut self, rhs: Self)
fn div_assign(&mut self, rhs: Self)
/=
operation. Read moresource§impl DivAssign<f64> for DVec4
impl DivAssign<f64> for DVec4
source§fn div_assign(&mut self, rhs: f64)
fn div_assign(&mut self, rhs: f64)
/=
operation. Read moresource§impl MulAssign<DVec4> for DVec4
impl MulAssign<DVec4> for DVec4
source§fn mul_assign(&mut self, rhs: Self)
fn mul_assign(&mut self, rhs: Self)
*=
operation. Read moresource§impl MulAssign<f64> for DVec4
impl MulAssign<f64> for DVec4
source§fn mul_assign(&mut self, rhs: f64)
fn mul_assign(&mut self, rhs: f64)
*=
operation. Read moresource§impl PartialEq<DVec4> for DVec4
impl PartialEq<DVec4> for DVec4
source§impl RemAssign<DVec4> for DVec4
impl RemAssign<DVec4> for DVec4
source§fn rem_assign(&mut self, rhs: Self)
fn rem_assign(&mut self, rhs: Self)
%=
operation. Read moresource§impl RemAssign<f64> for DVec4
impl RemAssign<f64> for DVec4
source§fn rem_assign(&mut self, rhs: f64)
fn rem_assign(&mut self, rhs: f64)
%=
operation. Read moresource§impl SubAssign<DVec4> for DVec4
impl SubAssign<DVec4> for DVec4
source§fn sub_assign(&mut self, rhs: DVec4)
fn sub_assign(&mut self, rhs: DVec4)
-=
operation. Read moresource§impl SubAssign<f64> for DVec4
impl SubAssign<f64> for DVec4
source§fn sub_assign(&mut self, rhs: f64)
fn sub_assign(&mut self, rhs: f64)
-=
operation. Read more