Struct glium::uniforms::UniformBuffer

pub struct UniformBuffer<T>where
    T: Content + ?Sized,{ /* private fields */ }

Buffer that contains a uniform block.

For example, to use a UniformBuffer<[u32; 8]>, you must declare it in GLSL as

     uniform MyBlock {
         uint array[8];
     };

and pass it to uniform! like this: # use glium::uniform; uniform! { MyBlock: &buffer, }

Implementations

impl<T> UniformBuffer<T>where T: Copy,

pub fn new<F>( facade: &F, data: T ) -> Result<UniformBuffer<T>, BufferCreationError>where F: Facade + ?Sized,

Uploads data in the uniforms buffer.

pub fn dynamic<F>( facade: &F, data: T ) -> Result<UniformBuffer<T>, BufferCreationError>where F: Facade + ?Sized,

Uploads data in the uniforms buffer.

pub fn persistent<F>( facade: &F, data: T ) -> Result<UniformBuffer<T>, BufferCreationError>where F: Facade + ?Sized,

Uploads data in the uniforms buffer.

pub fn immutable<F>( facade: &F, data: T ) -> Result<UniformBuffer<T>, BufferCreationError>where F: Facade + ?Sized,

Uploads data in the uniforms buffer.

pub fn empty<F>(facade: &F) -> Result<UniformBuffer<T>, BufferCreationError>where F: Facade + ?Sized,

Creates an empty buffer.

pub fn empty_dynamic<F>( facade: &F ) -> Result<UniformBuffer<T>, BufferCreationError>where F: Facade + ?Sized,

Creates an empty buffer.

pub fn empty_persistent<F>( facade: &F ) -> Result<UniformBuffer<T>, BufferCreationError>where F: Facade + ?Sized,

Creates an empty buffer.

pub fn empty_immutable<F>( facade: &F ) -> Result<UniformBuffer<T>, BufferCreationError>where F: Facade + ?Sized,

Creates an empty buffer.

impl<T> UniformBuffer<T>where T: Content + ?Sized,

pub fn empty_unsized<F>( facade: &F, size: usize ) -> Result<UniformBuffer<T>, BufferCreationError>where F: Facade + ?Sized,

Creates an empty buffer.

Panic

Panics if the size passed as parameter is not suitable for the type of data.

pub fn empty_unsized_dynamic<F>( facade: &F, size: usize ) -> Result<UniformBuffer<T>, BufferCreationError>where F: Facade + ?Sized,

Creates an empty buffer.

Panic

Panics if the size passed as parameter is not suitable for the type of data.

pub fn empty_unsized_persistent<F>( facade: &F, size: usize ) -> Result<UniformBuffer<T>, BufferCreationError>where F: Facade + ?Sized,

Creates an empty buffer.

Panic

Panics if the size passed as parameter is not suitable for the type of data.

pub fn empty_unsized_immutable<F>( facade: &F, size: usize ) -> Result<UniformBuffer<T>, BufferCreationError>where F: Facade + ?Sized,

Creates an empty buffer.

Panic

Panics if the size passed as parameter is not suitable for the type of data.

Methods from Deref<Target = Buffer<T>>

pub fn get_context(&self) -> &Rc<Context>

Returns the context corresponding to this buffer.

pub fn get_size(&self) -> usize

Returns the size in bytes of this buffer.

pub fn is_persistent(&self) -> bool

Returns true if this buffer uses persistent mapping.

pub fn write(&self, data: &T)

Uploads some data in this buffer.

Implementation

• For persistent-mapped buffers, waits untils the data is no longer used by the GPU then memcpies the data to the mapping.
• For immutable buffers, creates a temporary buffer that contains the data then calls glCopyBufferSubData to copy from the temporary buffer to the real one.
• For other types, calls glBufferSubData.

Panic

Panics if the length of data is different from the length of this buffer.

pub fn invalidate(&self)

Invalidates the content of the buffer. The data becomes undefined.

You should call this if you only use parts of a buffer. For example if you want to use the first half of the buffer, you invalidate the whole buffer then write the first half.

This operation is a no-op if the backend doesn’t support it and for persistent-mapped buffers.

Implementation

Calls glInvalidateBufferData if supported. Otherwise, calls glBufferData with a null pointer for data. If glBufferStorage has been used to create the buffer and glInvalidateBufferData is not supported, does nothing.

pub fn read(&self) -> Result<T::Owned, ReadError>

Reads the content of the buffer.

pub fn map(&mut self) -> Mapping<'_, T>

Maps the buffer in memory for both reading and writing.

Implementation

• For persistent-mapped buffers, waits until the data is no longer accessed by the GPU then returns a pointer to the existing mapping.
• For immutable buffers, creates a temporary buffer containing the data of the buffer and maps it. When the mapping object is destroyed, copies the content of the temporary buffer to the real buffer.
• For other types, calls glMapBuffer or glMapSubBuffer.

pub fn map_read(&mut self) -> ReadMapping<'_, T>

Maps the buffer in memory for reading.

Implementation

• For persistent-mapped buffers, waits until the data is no longer accessed by the GPU then returns a pointer to the existing mapping.
• For immutable buffers, creates a temporary buffer containing the data of the buffer and maps it.
• For other types, calls glMapBuffer or glMapSubBuffer.

pub fn map_write(&mut self) -> WriteMapping<'_, T>

Maps the buffer in memory for writing only.

Implementation

• For persistent-mapped buffers, waits until the data is no longer accessed by the GPU then returns a pointer to the existing mapping.
• For immutable buffers, creates a temporary buffer and maps it. When the mapping object is destroyed, copies the content of the temporary buffer to the real buffer.
• For other types, calls glMapBuffer or glMapSubBuffer.

pub fn copy_to<'a, S>(&self, target: S) -> Result<(), CopyError>where S: Into<BufferSlice<'a, T>>, T: 'a,

Copies the content of the buffer to another buffer.

Panic

Panics if T is unsized and the other buffer is too small.

pub unsafe fn slice_custom<R>(&self, f: Field<R>) -> BufferSlice<'_, R>where R: Content,

Builds a slice that contains an element from inside the buffer.

This method builds an object that represents a slice of the buffer. No actual operation OpenGL is performed.

Example

#[derive(Copy, Clone)]
struct BufferContent {
    value1: u16,
    value2: u16,
}

let slice = unsafe { buffer.slice_custom(glium::field!(BufferContent, value2)) };

pub unsafe fn slice_custom_mut<R>( &mut self, f: Field<R> ) -> BufferMutSlice<'_, R>where R: Content,

Same as slice_custom but returns a mutable slice.

This method builds an object that represents a slice of the buffer. No actual operation OpenGL is performed.

pub fn as_slice(&self) -> BufferSlice<'_, T>

Builds a slice containing the whole subbuffer.

This method builds an object that represents a slice of the buffer. No actual operation OpenGL is performed.

pub fn as_mut_slice(&mut self) -> BufferMutSlice<'_, T>

Builds a slice containing the whole subbuffer.

This method builds an object that represents a slice of the buffer. No actual operation OpenGL is performed.

pub fn as_slice_any(&self) -> BufferAnySlice<'_>

Builds a slice-any containing the whole subbuffer.

This method builds an object that represents a slice of the buffer. No actual operation OpenGL is performed.

pub fn len(&self) -> usize

Returns the number of elements in this buffer.

pub fn slice<R: RangeArgument<usize>>( &self, range: R ) -> Option<BufferSlice<'_, [T]>>

Builds a slice of this subbuffer. Returns None if out of range.

This method builds an object that represents a slice of the buffer. No actual operation OpenGL is performed.

pub fn slice_mut<R: RangeArgument<usize>>( &mut self, range: R ) -> Option<BufferMutSlice<'_, [T]>>

Builds a slice of this subbuffer. Returns None if out of range.

This method builds an object that represents a slice of the buffer. No actual operation OpenGL is performed.

pub fn read_as_texture_1d<S>(&self) -> Result<S, ReadError>where S: Texture1dDataSink<T>,

Reads the content of the buffer.

Trait Implementations

impl<'a, T> AsUniformValue for &'a UniformBuffer<T>where T: UniformBlock + Content + ?Sized,

fn as_uniform_value(&self) -> UniformValue<'_>

Builds a UniformValue.

impl<T> Debug for UniformBuffer<T>where T: Content + Debug + ?Sized,

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<T> Deref for UniformBuffer<T>where T: Content + ?Sized,

type Target = Buffer<T>

The resulting type after dereferencing.

fn deref(&self) -> &Buffer<T>

Dereferences the value.

impl<T> DerefMut for UniformBuffer<T>where T: Content + ?Sized,

fn deref_mut(&mut self) -> &mut Buffer<T>

Mutably dereferences the value.

impl<'a, T> From<&'a UniformBuffer<T>> for BufferSlice<'a, T>where T: Content + ?Sized,

fn from(b: &'a UniformBuffer<T>) -> BufferSlice<'a, T>

Converts to this type from the input type.

impl<'a, T> From<&'a mut UniformBuffer<T>> for BufferMutSlice<'a, T>where T: Content + ?Sized,

fn from(b: &'a mut UniformBuffer<T>) -> BufferMutSlice<'a, T>

Converts to this type from the input type.

impl<T: ?Sized + Content> GlObject for UniformBuffer<T>

type Id = u32

The type of identifier for this object.

fn get_id(&self) -> c_uint

Returns the id of the object.