Enum Code

#[repr(i32)]
pub enum Code {
    Ok = 0,
    Cancelled = 1,
    Unknown = 2,
    InvalidArgument = 3,
    DeadlineExceeded = 4,
    NotFound = 5,
    AlreadyExists = 6,
    PermissionDenied = 7,
    Unauthenticated = 16,
    ResourceExhausted = 8,
    FailedPrecondition = 9,
    Aborted = 10,
    OutOfRange = 11,
    Unimplemented = 12,
    Internal = 13,
    Unavailable = 14,
    DataLoss = 15,
}

The canonical error codes for gRPC APIs.

Sometimes multiple error codes may apply. Services should return the most specific error code that applies. For example, prefer OUT_OF_RANGE over FAILED_PRECONDITION if both codes apply. Similarly prefer NOT_FOUND or ALREADY_EXISTS over FAILED_PRECONDITION.

Variants

Ok = 0

Not an error; returned on success.

HTTP Mapping: 200 OK

Cancelled = 1

The operation was cancelled, typically by the caller.

HTTP Mapping: 499 Client Closed Request

Unknown = 2

Unknown error. For example, this error may be returned when a Status value received from another address space belongs to an error space that is not known in this address space. Also errors raised by APIs that do not return enough error information may be converted to this error.

HTTP Mapping: 500 Internal Server Error

InvalidArgument = 3

The client specified an invalid argument. Note that this differs from FAILED_PRECONDITION. INVALID_ARGUMENT indicates arguments that are problematic regardless of the state of the system (e.g., a malformed file name).

HTTP Mapping: 400 Bad Request

DeadlineExceeded = 4

The deadline expired before the operation could complete. For operations that change the state of the system, this error may be returned even if the operation has completed successfully. For example, a successful response from a server could have been delayed long enough for the deadline to expire.

HTTP Mapping: 504 Gateway Timeout

NotFound = 5

Some requested entity (e.g., file or directory) was not found.

Note to server developers: if a request is denied for an entire class of users, such as gradual feature rollout or undocumented allowlist, NOT_FOUND may be used. If a request is denied for some users within a class of users, such as user-based access control, PERMISSION_DENIED must be used.

HTTP Mapping: 404 Not Found

AlreadyExists = 6

The entity that a client attempted to create (e.g., file or directory) already exists.

HTTP Mapping: 409 Conflict

PermissionDenied = 7

The caller does not have permission to execute the specified operation. PERMISSION_DENIED must not be used for rejections caused by exhausting some resource (use RESOURCE_EXHAUSTED instead for those errors). PERMISSION_DENIED must not be used if the caller can not be identified (use UNAUTHENTICATED instead for those errors). This error code does not imply the request is valid or the requested entity exists or satisfies other pre-conditions.

HTTP Mapping: 403 Forbidden

Unauthenticated = 16

The request does not have valid authentication credentials for the operation.

HTTP Mapping: 401 Unauthorized

ResourceExhausted = 8

Some resource has been exhausted, perhaps a per-user quota, or perhaps the entire file system is out of space.

HTTP Mapping: 429 Too Many Requests

FailedPrecondition = 9

The operation was rejected because the system is not in a state required for the operation’s execution. For example, the directory to be deleted is non-empty, an rmdir operation is applied to a non-directory, etc.

Service implementors can use the following guidelines to decide between FAILED_PRECONDITION, ABORTED, and UNAVAILABLE: (a) Use UNAVAILABLE if the client can retry just the failing call. (b) Use ABORTED if the client should retry at a higher level. For example, when a client-specified test-and-set fails, indicating the client should restart a read-modify-write sequence. (c) Use FAILED_PRECONDITION if the client should not retry until the system state has been explicitly fixed. For example, if an “rmdir” fails because the directory is non-empty, FAILED_PRECONDITION should be returned since the client should not retry unless the files are deleted from the directory.

HTTP Mapping: 400 Bad Request

Aborted = 10

The operation was aborted, typically due to a concurrency issue such as a sequencer check failure or transaction abort.

See the guidelines above for deciding between FAILED_PRECONDITION, ABORTED, and UNAVAILABLE.

HTTP Mapping: 409 Conflict

OutOfRange = 11

The operation was attempted past the valid range. E.g., seeking or reading past end-of-file.

Unlike INVALID_ARGUMENT, this error indicates a problem that may be fixed if the system state changes. For example, a 32-bit file system will generate INVALID_ARGUMENT if asked to read at an offset that is not in the range [0,2^32-1], but it will generate OUT_OF_RANGE if asked to read from an offset past the current file size.

There is a fair bit of overlap between FAILED_PRECONDITION and OUT_OF_RANGE. We recommend using OUT_OF_RANGE (the more specific error) when it applies so that callers who are iterating through a space can easily look for an OUT_OF_RANGE error to detect when they are done.

HTTP Mapping: 400 Bad Request

Unimplemented = 12

The operation is not implemented or is not supported/enabled in this service.

HTTP Mapping: 501 Not Implemented

Internal = 13

Internal errors. This means that some invariants expected by the underlying system have been broken. This error code is reserved for serious errors.

HTTP Mapping: 500 Internal Server Error

Unavailable = 14

The service is currently unavailable. This is most likely a transient condition, which can be corrected by retrying with a backoff. Note that it is not always safe to retry non-idempotent operations.

See the guidelines above for deciding between FAILED_PRECONDITION, ABORTED, and UNAVAILABLE.

HTTP Mapping: 503 Service Unavailable

DataLoss = 15

Unrecoverable data loss or corruption.

HTTP Mapping: 500 Internal Server Error

Implementations

impl Code

pub fn is_valid(value: i32) -> bool

Returns true if value is a variant of Code.

pub fn from_i32(value: i32) -> Option<Code>

👎Deprecated: Use the TryFrom<i32> implementation instead

Converts an i32 to a Code, or None if value is not a valid variant.

impl Code

pub fn as_str_name(&self) -> &'static str

String value of the enum field names used in the ProtoBuf definition.

The values are not transformed in any way and thus are considered stable (if the ProtoBuf definition does not change) and safe for programmatic use.

pub fn from_str_name(value: &str) -> Option<Code>

Creates an enum from field names used in the ProtoBuf definition.

Trait Implementations

impl Clone for Code

fn clone(&self) -> Code

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Code

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Default for Code

fn default() -> Code

Returns the “default value” for a type.

impl Hash for Code

fn hash<__H>(&self, state: &mut __H)

where __H: Hasher,

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl Ord for Code

fn cmp(&self, other: &Code) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized,

Restrict a value to a certain interval.

impl PartialEq for Code

fn eq(&self, other: &Code) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for Code

fn partial_cmp(&self, other: &Code) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl TryFrom<i32> for Code

type Error = UnknownEnumValue

The type returned in the event of a conversion error.

fn try_from(value: i32) -> Result<Code, UnknownEnumValue>

Performs the conversion.

impl Copy for Code

impl Eq for Code

impl StructuralPartialEq for Code