Struct hickory_proto::rr::rdata::svcb::SVCB

pub struct SVCB { /* private fields */ }

draft-ietf-dnsop-svcb-https-03 SVCB and HTTPS RRs for DNS, February 2021

2.2.  RDATA wire format

  The RDATA for the SVCB RR consists of:

  *  a 2 octet field for SvcPriority as an integer in network byte
     order.
  *  the uncompressed, fully-qualified TargetName, represented as a
     sequence of length-prefixed labels as in Section 3.1 of [RFC1035].
  *  the SvcParams, consuming the remainder of the record (so smaller
     than 65535 octets and constrained by the RDATA and DNS message
     sizes).

  When the list of SvcParams is non-empty (ServiceMode), it contains a
  series of SvcParamKey=SvcParamValue pairs, represented as:

  *  a 2 octet field containing the SvcParamKey as an integer in
     network byte order.  (See Section 14.3.2 for the defined values.)
  *  a 2 octet field containing the length of the SvcParamValue as an
     integer between 0 and 65535 in network byte order (but constrained
     by the RDATA and DNS message sizes).
  *  an octet string of this length whose contents are in a format
     determined by the SvcParamKey.

  SvcParamKeys SHALL appear in increasing numeric order.

  Clients MUST consider an RR malformed if:

  *  the end of the RDATA occurs within a SvcParam.
  *  SvcParamKeys are not in strictly increasing numeric order.
  *  the SvcParamValue for an SvcParamKey does not have the expected
     format.

  Note that the second condition implies that there are no duplicate
  SvcParamKeys.

  If any RRs are malformed, the client MUST reject the entire RRSet and
  fall back to non-SVCB connection establishment.

Implementations

impl SVCB

pub fn new( svc_priority: u16, target_name: Name, svc_params: Vec<(SvcParamKey, SvcParamValue)> ) -> Self

Create a new SVCB record from parts

It is up to the caller to validate the data going into the record

pub fn svc_priority(&self) -> u16

draft-ietf-dnsop-svcb-https-03 SVCB and HTTPS RRs for DNS, February 2021

2.4.1.  SvcPriority

  When SvcPriority is 0 the SVCB record is in AliasMode
  (Section 2.4.2).  Otherwise, it is in ServiceMode (Section 2.4.3).

  Within a SVCB RRSet, all RRs SHOULD have the same Mode.  If an RRSet
  contains a record in AliasMode, the recipient MUST ignore any
  ServiceMode records in the set.

  RRSets are explicitly unordered collections, so the SvcPriority field
  is used to impose an ordering on SVCB RRs.  SVCB RRs with a smaller
  SvcPriority value SHOULD be given preference over RRs with a larger
  SvcPriority value.

  When receiving an RRSet containing multiple SVCB records with the
  same SvcPriority value, clients SHOULD apply a random shuffle within
  a priority level to the records before using them, to ensure uniform
  load-balancing.

pub fn target_name(&self) -> &Name

draft-ietf-dnsop-svcb-https-03 SVCB and HTTPS RRs for DNS, February 2021

2.5.  Special handling of "." in TargetName

  If TargetName has the value "." (represented in the wire format as a
   zero-length label), special rules apply.

2.5.1.  AliasMode

   For AliasMode SVCB RRs, a TargetName of "." indicates that the
   service is not available or does not exist.  This indication is
   advisory: clients encountering this indication MAY ignore it and
   attempt to connect without the use of SVCB.

2.5.2.  ServiceMode

   For ServiceMode SVCB RRs, if TargetName has the value ".", then the
   owner name of this record MUST be used as the effective TargetName.

   For example, in the following example "svc2.example.net" is the
   effective TargetName:

   example.com.      7200  IN HTTPS 0 svc.example.net.
   svc.example.net.  7200  IN CNAME svc2.example.net.
   svc2.example.net. 7200  IN HTTPS 1 . port=8002 echconfig="..."
   svc2.example.net. 300   IN A     192.0.2.2
   svc2.example.net. 300   IN AAAA  2001:db8::2

pub fn svc_params(&self) -> &[(SvcParamKey, SvcParamValue)]

See SvcParamKey for details on each parameter

Trait Implementations

impl BinEncodable for SVCB

fn emit(&self, encoder: &mut BinEncoder<'_>) -> ProtoResult<()>

Write the type to the stream

fn to_bytes(&self) -> ProtoResult<Vec<u8>>

Returns the object in binary form

impl Clone for SVCB

fn clone(&self) -> SVCB

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for SVCB

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<'de> Deserialize<'de> for SVCB

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl Display for SVCB

draft-ietf-dnsop-svcb-https-03 SVCB and HTTPS RRs for DNS, February 2021

simple.example. 7200 IN HTTPS 1 . alpn=h3
pool  7200 IN HTTPS 1 h3pool alpn=h2,h3 echconfig="123..."
              HTTPS 2 .      alpn=h2 echconfig="abc..."
@     7200 IN HTTPS 0 www
_8765._baz.api.example.com. 7200 IN SVCB 0 svc4-baz.example.net.

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Hash for SVCB

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl PartialEq for SVCB

fn eq(&self, other: &SVCB) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl RecordData for SVCB

fn try_from_rdata(data: RData) -> Result<Self, RData>

Attempts to convert to this RecordData from the RData type, if it is not the correct type the original is returned

fn try_borrow(data: &RData) -> Option<&Self>

Attempts to borrow this RecordData from the RData type, if it is not the correct type the original is returned

fn record_type(&self) -> RecordType

Get the associated RecordType for the RecordData

fn into_rdata(self) -> RData

Converts this RecordData into generic RecordData

impl Serialize for SVCB

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.

impl Eq for SVCB

impl StructuralPartialEq for SVCB