Struct iri_string::types::IriStr

#[repr(transparent)]
pub struct IriStr(_);

A borrowed slice of an IRI.

This corresponds to IRI rule in RFC 3987. This is scheme ":" ihier-part [ "?" iquery ] [ "#" ifragment ]. In other words, this is AbsoluteIriStr with fragment part allowed.

Methods

impl IriStr

pub fn to_absolute_and_fragment(&self) -> (&AbsoluteIriStr, Option<&str>)

Splits the IRI into absolute IRI part and fragment part.

A leading # character is truncated if the fragment part exists.

use std::convert::TryFrom;
let iri = <&IriStr>::try_from("foo://bar/baz?qux=quux#corge")?;
let (absolute, fragment) = iri.to_absolute_and_fragment();
assert_eq!(absolute, "foo://bar/baz?qux=quux");
assert_eq!(fragment, Some("corge"));

use std::convert::TryFrom;
let iri = <&IriStr>::try_from("foo://bar/baz?qux=quux#")?;
let (absolute, fragment) = iri.to_absolute_and_fragment();
assert_eq!(absolute, "foo://bar/baz?qux=quux");
assert_eq!(fragment, Some(""));

use std::convert::TryFrom;
let iri = <&IriStr>::try_from("foo://bar/baz?qux=quux")?;
let (absolute, fragment) = iri.to_absolute_and_fragment();
assert_eq!(absolute, "foo://bar/baz?qux=quux");
assert_eq!(fragment, None);

pub fn to_absolute(&self) -> &AbsoluteIriStr

Strips the fragment part if exists, and returns &AbsoluteIriStr.

Examples

use std::convert::TryFrom;
let iri = <&IriStr>::try_from("foo://bar/baz?qux=quux#corge")?;
assert_eq!(iri.to_absolute(), "foo://bar/baz?qux=quux");

use std::convert::TryFrom;
let iri = <&IriStr>::try_from("foo://bar/baz?qux=quux")?;
assert_eq!(iri.to_absolute(), "foo://bar/baz?qux=quux");

pub fn fragment(&self) -> Option<&str>

Returns the fragment part if exists.

A leading # character is truncated if the fragment part exists.

Examples

use std::convert::TryFrom;
let iri = <&IriStr>::try_from("foo://bar/baz?qux=quux#corge")?;
assert_eq!(iri.fragment(), Some("corge"));

use std::convert::TryFrom;
let iri = <&IriStr>::try_from("foo://bar/baz?qux=quux#")?;
assert_eq!(iri.fragment(), Some(""));

use std::convert::TryFrom;
let iri = <&IriStr>::try_from("foo://bar/baz?qux=quux")?;
assert_eq!(iri.fragment(), None);

Methods from Deref<Target = IriReferenceStr>

pub fn to_iri(&self) -> Result<&IriStr, &RelativeIriStr>

Returns the string as &IriStr, if it is valid as an IRI.

If it is not an IRI, then &RelativeIriStr is returned as Err(_).

pub fn to_relative_iri(&self) -> Result<&RelativeIriStr, &IriStr>

Returns the string as &RelativeIriStr, if it is valid as an IRI.

If it is not an IRI, then &IriStr is returned as Err(_).

pub fn resolve(&self, base: &AbsoluteIriStr) -> IriString

Returns resolved IRI using strict resolver.

About reference resolution output example, see RFC 3986 section 5.4.

About resolver strictness, see RFC 3986 section 5.4.2:

Some parsers allow the scheme name to be present in a relative reference if it is the same as the base URI scheme. This is considered to be a loophole in prior specifications of partial URI RFC1630. Its use should be avoided but is allowed for backward compatibility.

--- https://tools.ietf.org/html/rfc3986#section-5.4.2

Usual users will want to use strict resolver.

Trait Implementations

impl AsRef<IriStr> for AbsoluteIriString

fn as_ref(&self) -> &IriStr

Performs the conversion.

impl AsRef<IriStr> for AbsoluteIriStr

fn as_ref(&self) -> &IriStr

Performs the conversion.

impl AsRef<IriStr> for IriString

fn as_ref(&self) -> &IriStr

Performs the conversion.

impl AsRef<IriStr> for IriStr

fn as_ref(&self) -> &IriStr

Performs the conversion.

impl AsRef<str> for IriStr

fn as_ref(&self) -> &str

Performs the conversion.

impl AsRef<IriReferenceStr> for IriStr

fn as_ref(&self) -> &IriReferenceStr

Performs the conversion.

impl<'a> From<&'a AbsoluteIriStr> for &'a IriStr

fn from(s: &'a AbsoluteIriStr) -> &'a IriStr

Performs the conversion.

impl<'_> From<&'_ IriStr> for Arc<IriStr>

fn from(_v: &IriStr) -> Self

Performs the conversion.

impl<'_> From<&'_ IriStr> for Box<IriStr>

fn from(_v: &IriStr) -> Self

Performs the conversion.

impl<'_> From<&'_ IriStr> for Rc<IriStr>

fn from(_v: &IriStr) -> Self

Performs the conversion.

impl<'a> From<&'a IriStr> for &'a IriReferenceStr

fn from(s: &'a IriStr) -> &'a IriReferenceStr

Performs the conversion.

impl Eq for IriStr

impl PartialEq<IriStr> for AbsoluteIriString

fn eq(&self, o: &IriStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl PartialEq<AbsoluteIriString> for IriStr

fn eq(&self, o: &AbsoluteIriString) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_> PartialEq<&'_ IriStr> for AbsoluteIriString

fn eq(&self, o: &&IriStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_> PartialEq<AbsoluteIriString> for &'_ IriStr

fn eq(&self, o: &AbsoluteIriString) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl PartialEq<IriStr> for AbsoluteIriStr

fn eq(&self, o: &IriStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl PartialEq<AbsoluteIriStr> for IriStr

fn eq(&self, o: &AbsoluteIriStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_> PartialEq<&'_ IriStr> for AbsoluteIriStr

fn eq(&self, o: &&IriStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_> PartialEq<AbsoluteIriStr> for &'_ IriStr

fn eq(&self, o: &AbsoluteIriStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_> PartialEq<IriStr> for &'_ AbsoluteIriStr

fn eq(&self, o: &IriStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_> PartialEq<&'_ AbsoluteIriStr> for IriStr

fn eq(&self, o: &&AbsoluteIriStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl PartialEq<IriStr> for IriStr

fn eq(&self, other: &IriStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &IriStr) -> bool

This method tests for !=.

impl PartialEq<IriStr> for IriString

fn eq(&self, __other: &IriStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl PartialEq<IriString> for IriStr

fn eq(&self, __other: &IriString) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_> PartialEq<&'_ IriStr> for IriString

fn eq(&self, __other: &&IriStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_> PartialEq<IriString> for &'_ IriStr

fn eq(&self, __other: &IriString) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_> PartialEq<&'_ IriStr> for IriStr

fn eq(&self, __other: &&IriStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_> PartialEq<IriStr> for &'_ IriStr

fn eq(&self, __other: &IriStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_> PartialEq<Cow<'_, IriStr>> for IriStr

fn eq(&self, __other: &Cow<IriStr>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_> PartialEq<IriStr> for Cow<'_, IriStr>

fn eq(&self, __other: &IriStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl PartialEq<str> for IriStr

fn eq(&self, __other: &str) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl PartialEq<IriStr> for str

fn eq(&self, __other: &IriStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_> PartialEq<&'_ str> for IriStr

fn eq(&self, __other: &&str) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_> PartialEq<IriStr> for &'_ str

fn eq(&self, __other: &IriStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl PartialEq<String> for IriStr

fn eq(&self, __other: &String) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl PartialEq<IriStr> for String

fn eq(&self, __other: &IriStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_> PartialEq<Cow<'_, str>> for IriStr

fn eq(&self, __other: &Cow<str>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_> PartialEq<IriStr> for Cow<'_, str>

fn eq(&self, __other: &IriStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_> PartialEq<str> for &'_ IriStr

fn eq(&self, __other: &str) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_> PartialEq<&'_ IriStr> for str

fn eq(&self, __other: &&IriStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_> PartialEq<String> for &'_ IriStr

fn eq(&self, __other: &String) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_> PartialEq<&'_ IriStr> for String

fn eq(&self, __other: &&IriStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_, '_> PartialEq<Cow<'_, str>> for &'_ IriStr

fn eq(&self, __other: &Cow<str>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_, '_> PartialEq<&'_ IriStr> for Cow<'_, str>

fn eq(&self, __other: &&IriStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl PartialEq<IriReferenceStr> for IriStr

fn eq(&self, o: &IriReferenceStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl PartialEq<IriStr> for IriReferenceStr

fn eq(&self, o: &IriStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_> PartialEq<&'_ IriReferenceStr> for IriStr

fn eq(&self, o: &&IriReferenceStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_> PartialEq<IriStr> for &'_ IriReferenceStr

fn eq(&self, o: &IriStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl PartialEq<IriReferenceString> for IriStr

fn eq(&self, o: &IriReferenceString) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl PartialEq<IriStr> for IriReferenceString

fn eq(&self, o: &IriStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_> PartialEq<Cow<'_, IriReferenceStr>> for IriStr

fn eq(&self, o: &Cow<IriReferenceStr>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_> PartialEq<IriStr> for Cow<'_, IriReferenceStr>

fn eq(&self, o: &IriStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_> PartialEq<IriReferenceStr> for &'_ IriStr

fn eq(&self, o: &IriReferenceStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_> PartialEq<&'_ IriStr> for IriReferenceStr

fn eq(&self, o: &&IriStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_> PartialEq<IriReferenceString> for &'_ IriStr

fn eq(&self, o: &IriReferenceString) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_> PartialEq<&'_ IriStr> for IriReferenceString

fn eq(&self, o: &&IriStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_, '_> PartialEq<Cow<'_, IriReferenceStr>> for &'_ IriStr

fn eq(&self, o: &Cow<IriReferenceStr>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_, '_> PartialEq<&'_ IriStr> for Cow<'_, IriReferenceStr>

fn eq(&self, o: &&IriStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl PartialOrd<IriStr> for AbsoluteIriString

fn partial_cmp(&self, o: &IriStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<AbsoluteIriString> for IriStr

fn partial_cmp(&self, o: &AbsoluteIriString) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_> PartialOrd<&'_ IriStr> for AbsoluteIriString

fn partial_cmp(&self, o: &&IriStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_> PartialOrd<AbsoluteIriString> for &'_ IriStr

fn partial_cmp(&self, o: &AbsoluteIriString) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<IriStr> for AbsoluteIriStr

fn partial_cmp(&self, o: &IriStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<AbsoluteIriStr> for IriStr

fn partial_cmp(&self, o: &AbsoluteIriStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_> PartialOrd<&'_ IriStr> for AbsoluteIriStr

fn partial_cmp(&self, o: &&IriStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_> PartialOrd<AbsoluteIriStr> for &'_ IriStr

fn partial_cmp(&self, o: &AbsoluteIriStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_> PartialOrd<IriStr> for &'_ AbsoluteIriStr

fn partial_cmp(&self, o: &IriStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_> PartialOrd<&'_ AbsoluteIriStr> for IriStr

fn partial_cmp(&self, o: &&AbsoluteIriStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<IriStr> for IriStr

fn partial_cmp(&self, other: &IriStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &IriStr) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &IriStr) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &IriStr) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &IriStr) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<IriStr> for IriString

fn partial_cmp(&self, __other: &IriStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<IriString> for IriStr

fn partial_cmp(&self, __other: &IriString) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_> PartialOrd<&'_ IriStr> for IriString

fn partial_cmp(&self, __other: &&IriStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_> PartialOrd<IriString> for &'_ IriStr

fn partial_cmp(&self, __other: &IriString) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_> PartialOrd<&'_ IriStr> for IriStr

fn partial_cmp(&self, __other: &&IriStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_> PartialOrd<IriStr> for &'_ IriStr

fn partial_cmp(&self, __other: &IriStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_> PartialOrd<Cow<'_, IriStr>> for IriStr

fn partial_cmp(&self, __other: &Cow<IriStr>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_> PartialOrd<IriStr> for Cow<'_, IriStr>

fn partial_cmp(&self, __other: &IriStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<str> for IriStr

fn partial_cmp(&self, __other: &str) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<IriStr> for str

fn partial_cmp(&self, __other: &IriStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_> PartialOrd<&'_ str> for IriStr

fn partial_cmp(&self, __other: &&str) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_> PartialOrd<IriStr> for &'_ str

fn partial_cmp(&self, __other: &IriStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<String> for IriStr

fn partial_cmp(&self, __other: &String) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<IriStr> for String

fn partial_cmp(&self, __other: &IriStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_> PartialOrd<Cow<'_, str>> for IriStr

fn partial_cmp(&self, __other: &Cow<str>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_> PartialOrd<IriStr> for Cow<'_, str>

fn partial_cmp(&self, __other: &IriStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_> PartialOrd<str> for &'_ IriStr

fn partial_cmp(&self, __other: &str) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_> PartialOrd<&'_ IriStr> for str

fn partial_cmp(&self, __other: &&IriStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_> PartialOrd<String> for &'_ IriStr

fn partial_cmp(&self, __other: &String) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_> PartialOrd<&'_ IriStr> for String

fn partial_cmp(&self, __other: &&IriStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_, '_> PartialOrd<Cow<'_, str>> for &'_ IriStr

fn partial_cmp(&self, __other: &Cow<str>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_, '_> PartialOrd<&'_ IriStr> for Cow<'_, str>

fn partial_cmp(&self, __other: &&IriStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<IriReferenceStr> for IriStr

fn partial_cmp(&self, o: &IriReferenceStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<IriStr> for IriReferenceStr

fn partial_cmp(&self, o: &IriStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_> PartialOrd<&'_ IriReferenceStr> for IriStr

fn partial_cmp(&self, o: &&IriReferenceStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_> PartialOrd<IriStr> for &'_ IriReferenceStr

fn partial_cmp(&self, o: &IriStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<IriReferenceString> for IriStr

fn partial_cmp(&self, o: &IriReferenceString) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<IriStr> for IriReferenceString

fn partial_cmp(&self, o: &IriStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_> PartialOrd<Cow<'_, IriReferenceStr>> for IriStr

fn partial_cmp(&self, o: &Cow<IriReferenceStr>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_> PartialOrd<IriStr> for Cow<'_, IriReferenceStr>

fn partial_cmp(&self, o: &IriStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_> PartialOrd<IriReferenceStr> for &'_ IriStr

fn partial_cmp(&self, o: &IriReferenceStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_> PartialOrd<&'_ IriStr> for IriReferenceStr

fn partial_cmp(&self, o: &&IriStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_> PartialOrd<IriReferenceString> for &'_ IriStr

fn partial_cmp(&self, o: &IriReferenceString) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_> PartialOrd<&'_ IriStr> for IriReferenceString

fn partial_cmp(&self, o: &&IriStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_, '_> PartialOrd<Cow<'_, IriReferenceStr>> for &'_ IriStr

fn partial_cmp(&self, o: &Cow<IriReferenceStr>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_, '_> PartialOrd<&'_ IriStr> for Cow<'_, IriReferenceStr>

fn partial_cmp(&self, o: &&IriStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl Ord for IriStr

fn cmp(&self, other: &IriStr) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

🔬 This is a nightly-only experimental API. (clamp)

Restrict a value to a certain interval.

impl<'_> Default for &'_ IriStr

fn default() -> Self

Returns the "default value" for a type.

impl ToOwned for IriStr

type Owned = IriString

The resulting type after obtaining ownership.

fn to_owned(&self) -> Self::Owned

Creates owned data from borrowed data, usually by cloning.

fn clone_into(&self, target: &mut Self::Owned)

🔬 This is a nightly-only experimental API. (toowned_clone_into)

recently added

Uses borrowed data to replace owned data, usually by cloning.

impl Hash for IriStr

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given [Hasher].

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given [Hasher].

impl Deref for IriStr

type Target = IriReferenceStr

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl Debug for IriStr

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl<'_> Display for &'_ IriStr

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl<'a> TryFrom<&'a IriStr> for &'a AbsoluteIriStr

type Error = Error

The type returned in the event of a conversion error.

fn try_from(v: &'a IriStr) -> Result<Self, Self::Error>

Performs the conversion.

impl<'a> TryFrom<&'a str> for &'a IriStr

type Error = Error

The type returned in the event of a conversion error.

fn try_from(_v: &'a str) -> Result<Self, Self::Error>

Performs the conversion.

impl<'a> TryFrom<&'a IriReferenceStr> for &'a IriStr

type Error = Error

The type returned in the event of a conversion error.

fn try_from(v: &'a IriReferenceStr) -> Result<Self, Self::Error>

Performs the conversion.

impl Borrow<IriStr> for IriString

fn borrow(&self) -> &IriStr

Immutably borrows from an owned value.

impl Serialize for IriStr

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error> where
    __S: Serializer, 

Serialize this value into the given Serde serializer.

impl<'de: 'a, 'a> Deserialize<'de> for &'a IriStr

fn deserialize<D>(deserializer: D) -> Result<Self, D::Error> where
    D: Deserializer<'de>, 

Deserialize this value from the given Serde deserializer.