Struct iri_string::types::RiStr

#[repr(transparent)]
pub struct RiStr<S> { /* fields omitted */ }

A borrowed string of an absolute IRI possibly with fragment part.

This corresponds to IRI rule in RFC 3987 (and URI rule in RFC 3986). The rule for IRI is scheme ":" ihier-part [ "?" iquery ] [ "#" ifragment ]. In other words, this is RiAbsoluteStr with fragment part allowed.

Valid values

This type can have an IRI (which is absolute, and may have fragment part).

assert!(IriStr::new("https://user:pass@example.com:8080").is_ok());
assert!(IriStr::new("https://example.com/").is_ok());
assert!(IriStr::new("https://example.com/foo?bar=baz").is_ok());
assert!(IriStr::new("https://example.com/foo?bar=baz#qux").is_ok());
assert!(IriStr::new("foo:bar").is_ok());
assert!(IriStr::new("foo:").is_ok());
// `foo://.../` below are all allowed. See the crate documentation for detail.
assert!(IriStr::new("foo:/").is_ok());
assert!(IriStr::new("foo://").is_ok());
assert!(IriStr::new("foo:///").is_ok());
assert!(IriStr::new("foo:////").is_ok());
assert!(IriStr::new("foo://///").is_ok());

Relative IRI reference is not allowed.

// This is relative path.
assert!(IriStr::new("foo/bar").is_err());
// `/foo/bar` is an absolute path, but it is authority-relative.
assert!(IriStr::new("/foo/bar").is_err());
// `//foo/bar` is termed "network-path reference",
// or usually called "protocol-relative reference".
assert!(IriStr::new("//foo/bar").is_err());
// Same-document reference is relative.
assert!(IriStr::new("#foo").is_err());
// Empty string is not a valid absolute IRI.
assert!(IriStr::new("").is_err());

Some characters and sequences cannot used in an IRI.

// `<` and `>` cannot directly appear in an IRI.
assert!(IriStr::new("<not allowed>").is_err());
// Broken percent encoding cannot appear in an IRI.
assert!(IriStr::new("%").is_err());
assert!(IriStr::new("%GG").is_err());

Implementations

impl<S: Spec> RiStr<S>

pub fn new(s: &str) -> Result<&Self, Error>

Creates a new string.

pub fn as_str(&self) -> &str

Returns &str.

pub fn len(&self) -> usize

Returns the string length.

pub fn is_empty(&self) -> bool

Returns whether the string is empty.

impl<S: Spec> RiStr<S>

pub fn to_absolute_and_fragment(
    &self
) -> (&RiAbsoluteStr<S>, Option<&RiFragmentStr<S>>)

Splits the IRI into an absolute IRI part and a fragment part.

A leading # character is truncated if the fragment part exists.

Examples

If the IRI has a fragment part, Some(_) is returned.

let iri = IriStr::new("foo://bar/baz?qux=quux#corge")?;
let (absolute, fragment) = iri.to_absolute_and_fragment();
let fragment_expected = IriFragmentStr::new("corge")?;
assert_eq!(absolute, "foo://bar/baz?qux=quux");
assert_eq!(fragment, Some(fragment_expected));

When the fragment part exists but is empty string, Some(_) is returned.

let iri = IriStr::new("foo://bar/baz?qux=quux#")?;
let (absolute, fragment) = iri.to_absolute_and_fragment();
let fragment_expected = IriFragmentStr::new("")?;
assert_eq!(absolute, "foo://bar/baz?qux=quux");
assert_eq!(fragment, Some(fragment_expected));

If the IRI has no fragment, None is returned.

let iri = IriStr::new("foo://bar/baz?qux=quux")?;
let (absolute, fragment) = iri.to_absolute_and_fragment();
assert_eq!(absolute, "foo://bar/baz?qux=quux");
assert_eq!(fragment, None);

pub fn to_absolute(&self) -> &RiAbsoluteStr<S>

Strips the fragment part if exists, and returns &RiAbsoluteStr.

Examples

let iri = IriStr::new("foo://bar/baz?qux=quux#corge")?;
assert_eq!(iri.to_absolute(), "foo://bar/baz?qux=quux");

let iri = IriStr::new("foo://bar/baz?qux=quux")?;
assert_eq!(iri.to_absolute(), "foo://bar/baz?qux=quux");

pub fn fragment(&self) -> Option<&RiFragmentStr<S>>

Returns the fragment part if exists.

A leading # character is truncated if the fragment part exists.

Examples

let iri = IriStr::new("foo://bar/baz?qux=quux#corge")?;
let fragment = IriFragmentStr::new("corge")?;
assert_eq!(iri.fragment(), Some(fragment));

let iri = IriStr::new("foo://bar/baz?qux=quux#")?;
let fragment = IriFragmentStr::new("")?;
assert_eq!(iri.fragment(), Some(fragment));

let iri = IriStr::new("foo://bar/baz?qux=quux")?;
assert_eq!(iri.fragment(), None);

Trait Implementations

impl<S: Spec> AsRef<RiReferenceStr<S>> for RiStr<S>

fn as_ref(&self) -> &RiReferenceStr<S>

Performs the conversion.

impl AsRef<RiStr<IriSpec>> for RiStr<UriSpec>

fn as_ref(&self) -> &RiStr<IriSpec>

Performs the conversion.

impl AsRef<RiStr<IriSpec>> for RiString<UriSpec>

fn as_ref(&self) -> &RiStr<IriSpec>

Performs the conversion.

impl<S: Spec> AsRef<RiStr<S>> for RiAbsoluteStr<S>

fn as_ref(&self) -> &RiStr<S>

Performs the conversion.

impl<S: Spec> AsRef<RiStr<S>> for RiAbsoluteString<S>

fn as_ref(&self) -> &RiStr<S>

Performs the conversion.

impl<S: Spec> AsRef<RiStr<S>> for RiStr<S>

fn as_ref(&self) -> &RiStr<S>

Performs the conversion.

impl<S: Spec> AsRef<RiStr<S>> for RiString<S>

fn as_ref(&self) -> &RiStr<S>

Performs the conversion.

impl<S: Spec> AsRef<str> for RiStr<S>

fn as_ref(&self) -> &str

Performs the conversion.

impl<S: Spec> Borrow<RiStr<S>> for RiString<S>

fn borrow(&self) -> &RiStr<S>

Immutably borrows from an owned value.

impl<S: Spec> Debug for RiStr<S>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<'de: 'a, 'a, S: 'de + Spec> Deserialize<'de> for &'a RiStr<S>

fn deserialize<D>(deserializer: D) -> Result<Self, D::Error> where
    D: Deserializer<'de>, 

Deserialize this value from the given Serde deserializer.

impl<S: Spec> Display for RiStr<S>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<S: Spec> From<&'_ RiStr<S>> for Arc<RiStr<S>>

fn from(s: &RiStr<S>) -> Self

Performs the conversion.

impl<S: Spec> From<&'_ RiStr<S>> for Box<RiStr<S>>

fn from(s: &RiStr<S>) -> Self

Performs the conversion.

impl<S: Spec> From<&'_ RiStr<S>> for Rc<RiStr<S>>

fn from(s: &RiStr<S>) -> Self

Performs the conversion.

impl<S: Spec> From<&'_ RiStr<S>> for RiString<S>

fn from(s: &RiStr<S>) -> Self

Performs the conversion.

impl<'a, S: Spec> From<&'a RiAbsoluteStr<S>> for &'a RiStr<S>

fn from(s: &'a RiAbsoluteStr<S>) -> &'a RiStr<S>

Performs the conversion.

impl<'a, S: Spec> From<&'a RiStr<S>> for &'a str

fn from(s: &'a RiStr<S>) -> &'a str

Performs the conversion.

impl<'a, S: Spec> From<&'a RiStr<S>> for &'a RiReferenceStr<S>

fn from(s: &'a RiStr<S>) -> &'a RiReferenceStr<S>

Performs the conversion.

impl<S: Spec> Hash for RiStr<S>

fn hash<H: Hasher>(&self, state: &mut H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given Hasher.

impl<S: Spec> Ord for RiStr<S>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl<S: Spec, T: Spec> PartialEq<&'_ RiAbsoluteStr<S>> for RiStr<T>

fn eq(&self, o: &&RiAbsoluteStr<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<&'_ RiReferenceStr<T>> for RiStr<S>

fn eq(&self, o: &&RiReferenceStr<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec> PartialEq<&'_ RiStr<S>> for str

fn eq(&self, o: &&RiStr<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<&'_ RiStr<S>> for RiStr<T>

fn eq(&self, o: &&RiStr<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec> PartialEq<&'_ RiStr<S>> for Cow<'_, str>

fn eq(&self, o: &&RiStr<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<&'_ RiStr<S>> for Cow<'_, RiStr<T>>

fn eq(&self, o: &&RiStr<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<&'_ RiStr<S>> for RiString<T>

fn eq(&self, o: &&RiStr<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<&'_ RiStr<S>> for RiReferenceStr<T>

fn eq(&self, o: &&RiStr<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<&'_ RiStr<S>> for Cow<'_, RiReferenceStr<T>>

fn eq(&self, o: &&RiStr<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<&'_ RiStr<S>> for RiReferenceString<T>

fn eq(&self, o: &&RiStr<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<&'_ RiStr<T>> for RiAbsoluteStr<S>

fn eq(&self, o: &&RiStr<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<&'_ RiStr<T>> for Cow<'_, RiAbsoluteStr<S>>

fn eq(&self, o: &&RiStr<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<&'_ RiStr<T>> for RiAbsoluteString<S>

fn eq(&self, o: &&RiStr<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec> PartialEq<&'_ str> for RiStr<S>

fn eq(&self, o: &&str) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<Cow<'_, RiAbsoluteStr<S>>> for RiStr<T>

fn eq(&self, o: &Cow<'_, RiAbsoluteStr<S>>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<Cow<'_, RiAbsoluteStr<S>>> for &RiStr<T>

fn eq(&self, o: &Cow<'_, RiAbsoluteStr<S>>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<Cow<'_, RiReferenceStr<T>>> for RiStr<S>

fn eq(&self, o: &Cow<'_, RiReferenceStr<T>>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<Cow<'_, RiReferenceStr<T>>> for &RiStr<S>

fn eq(&self, o: &Cow<'_, RiReferenceStr<T>>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<Cow<'_, RiStr<T>>> for &RiStr<S>

fn eq(&self, o: &Cow<'_, RiStr<T>>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec> PartialEq<Cow<'_, str>> for RiStr<S>

fn eq(&self, o: &Cow<'_, str>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec> PartialEq<Cow<'_, str>> for &RiStr<S>

fn eq(&self, o: &Cow<'_, str>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiAbsoluteStr<S>> for RiStr<T>

fn eq(&self, o: &RiAbsoluteStr<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiAbsoluteStr<S>> for &RiStr<T>

fn eq(&self, o: &RiAbsoluteStr<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiAbsoluteString<S>> for RiStr<T>

fn eq(&self, o: &RiAbsoluteString<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiAbsoluteString<S>> for &RiStr<T>

fn eq(&self, o: &RiAbsoluteString<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiReferenceStr<T>> for RiStr<S>

fn eq(&self, o: &RiReferenceStr<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiReferenceStr<T>> for &RiStr<S>

fn eq(&self, o: &RiReferenceStr<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiReferenceString<T>> for RiStr<S>

fn eq(&self, o: &RiReferenceString<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiReferenceString<T>> for &RiStr<S>

fn eq(&self, o: &RiReferenceString<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec> PartialEq<RiStr<S>> for RiStr<S>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec> PartialEq<RiStr<S>> for str

fn eq(&self, o: &RiStr<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec> PartialEq<RiStr<S>> for &str

fn eq(&self, o: &RiStr<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec> PartialEq<RiStr<S>> for Cow<'_, str>

fn eq(&self, o: &RiStr<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiStr<S>> for RiString<T>

fn eq(&self, o: &RiStr<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiStr<S>> for RiReferenceStr<T>

fn eq(&self, o: &RiStr<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiStr<S>> for &RiReferenceStr<T>

fn eq(&self, o: &RiStr<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiStr<S>> for Cow<'_, RiReferenceStr<T>>

fn eq(&self, o: &RiStr<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiStr<S>> for RiReferenceString<T>

fn eq(&self, o: &RiStr<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiStr<T>> for RiAbsoluteStr<S>

fn eq(&self, o: &RiStr<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiStr<T>> for &RiAbsoluteStr<S>

fn eq(&self, o: &RiStr<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiStr<T>> for Cow<'_, RiAbsoluteStr<S>>

fn eq(&self, o: &RiStr<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiStr<T>> for RiAbsoluteString<S>

fn eq(&self, o: &RiStr<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiStr<T>> for &RiStr<S>

fn eq(&self, o: &RiStr<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiString<T>> for RiStr<S>

fn eq(&self, o: &RiString<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiString<T>> for &RiStr<S>

fn eq(&self, o: &RiString<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec> PartialEq<str> for RiStr<S>

fn eq(&self, o: &str) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec> PartialEq<str> for &RiStr<S>

fn eq(&self, o: &str) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialOrd<&'_ RiAbsoluteStr<S>> for RiStr<T>

fn partial_cmp(&self, o: &&RiAbsoluteStr<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<&'_ RiReferenceStr<T>> for RiStr<S>

fn partial_cmp(&self, o: &&RiReferenceStr<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec> PartialOrd<&'_ RiStr<S>> for str

fn partial_cmp(&self, o: &&RiStr<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<&'_ RiStr<S>> for RiStr<T>

fn partial_cmp(&self, o: &&RiStr<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec> PartialOrd<&'_ RiStr<S>> for Cow<'_, str>

fn partial_cmp(&self, o: &&RiStr<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<&'_ RiStr<S>> for Cow<'_, RiStr<T>>

fn partial_cmp(&self, o: &&RiStr<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<&'_ RiStr<S>> for RiString<T>

fn partial_cmp(&self, o: &&RiStr<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<&'_ RiStr<S>> for RiReferenceStr<T>

fn partial_cmp(&self, o: &&RiStr<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<&'_ RiStr<S>> for Cow<'_, RiReferenceStr<T>>

fn partial_cmp(&self, o: &&RiStr<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<&'_ RiStr<S>> for RiReferenceString<T>

fn partial_cmp(&self, o: &&RiStr<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<&'_ RiStr<T>> for RiAbsoluteStr<S>

fn partial_cmp(&self, o: &&RiStr<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<&'_ RiStr<T>> for Cow<'_, RiAbsoluteStr<S>>

fn partial_cmp(&self, o: &&RiStr<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<&'_ RiStr<T>> for RiAbsoluteString<S>

fn partial_cmp(&self, o: &&RiStr<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec> PartialOrd<&'_ str> for RiStr<S>

fn partial_cmp(&self, o: &&str) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<Cow<'_, RiAbsoluteStr<S>>> for RiStr<T>

fn partial_cmp(&self, o: &Cow<'_, RiAbsoluteStr<S>>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<Cow<'_, RiAbsoluteStr<S>>> for &RiStr<T>

fn partial_cmp(&self, o: &Cow<'_, RiAbsoluteStr<S>>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<Cow<'_, RiReferenceStr<T>>> for RiStr<S>

fn partial_cmp(&self, o: &Cow<'_, RiReferenceStr<T>>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<Cow<'_, RiReferenceStr<T>>> for &RiStr<S>

fn partial_cmp(&self, o: &Cow<'_, RiReferenceStr<T>>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<Cow<'_, RiStr<T>>> for &RiStr<S>

fn partial_cmp(&self, o: &Cow<'_, RiStr<T>>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec> PartialOrd<Cow<'_, str>> for RiStr<S>

fn partial_cmp(&self, o: &Cow<'_, str>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec> PartialOrd<Cow<'_, str>> for &RiStr<S>

fn partial_cmp(&self, o: &Cow<'_, str>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiAbsoluteStr<S>> for RiStr<T>

fn partial_cmp(&self, o: &RiAbsoluteStr<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiAbsoluteStr<S>> for &RiStr<T>

fn partial_cmp(&self, o: &RiAbsoluteStr<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiAbsoluteString<S>> for RiStr<T>

fn partial_cmp(&self, o: &RiAbsoluteString<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiAbsoluteString<S>> for &RiStr<T>

fn partial_cmp(&self, o: &RiAbsoluteString<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiReferenceStr<T>> for RiStr<S>

fn partial_cmp(&self, o: &RiReferenceStr<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiReferenceStr<T>> for &RiStr<S>

fn partial_cmp(&self, o: &RiReferenceStr<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiReferenceString<T>> for RiStr<S>

fn partial_cmp(&self, o: &RiReferenceString<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiReferenceString<T>> for &RiStr<S>

fn partial_cmp(&self, o: &RiReferenceString<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec> PartialOrd<RiStr<S>> for RiStr<S>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec> PartialOrd<RiStr<S>> for str

fn partial_cmp(&self, o: &RiStr<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec> PartialOrd<RiStr<S>> for &str

fn partial_cmp(&self, o: &RiStr<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec> PartialOrd<RiStr<S>> for Cow<'_, str>

fn partial_cmp(&self, o: &RiStr<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiStr<S>> for RiString<T>

fn partial_cmp(&self, o: &RiStr<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiStr<S>> for RiReferenceStr<T>

fn partial_cmp(&self, o: &RiStr<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiStr<S>> for &RiReferenceStr<T>

fn partial_cmp(&self, o: &RiStr<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiStr<S>> for Cow<'_, RiReferenceStr<T>>

fn partial_cmp(&self, o: &RiStr<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiStr<S>> for RiReferenceString<T>

fn partial_cmp(&self, o: &RiStr<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiStr<T>> for RiAbsoluteStr<S>

fn partial_cmp(&self, o: &RiStr<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiStr<T>> for &RiAbsoluteStr<S>

fn partial_cmp(&self, o: &RiStr<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiStr<T>> for Cow<'_, RiAbsoluteStr<S>>

fn partial_cmp(&self, o: &RiStr<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiStr<T>> for RiAbsoluteString<S>

fn partial_cmp(&self, o: &RiStr<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiStr<T>> for &RiStr<S>

fn partial_cmp(&self, o: &RiStr<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiString<T>> for RiStr<S>

fn partial_cmp(&self, o: &RiString<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiString<T>> for &RiStr<S>

fn partial_cmp(&self, o: &RiString<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec> PartialOrd<str> for RiStr<S>

fn partial_cmp(&self, o: &str) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec> PartialOrd<str> for &RiStr<S>

fn partial_cmp(&self, o: &str) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S> Serialize for RiStr<S> where
    S: Spec, 

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error> where
    __S: Serializer, 

Serialize this value into the given Serde serializer.

impl<S: Spec> ToOwned for RiStr<S>

type Owned = RiString<S>

The resulting type after obtaining ownership.

fn to_owned(&self) -> Self::Owned

Creates owned data from borrowed data, usually by cloning.

fn clone_into(&self, target: &mut Self::Owned)

🔬 This is a nightly-only experimental API. (toowned_clone_into)

Uses borrowed data to replace owned data, usually by cloning.

impl<'a, S: Spec> TryFrom<&'a RiReferenceStr<S>> for &'a RiStr<S>

type Error = Error

The type returned in the event of a conversion error.

fn try_from(s: &'a RiReferenceStr<S>) -> Result<Self, Self::Error>

Performs the conversion.

impl<'a, S: Spec> TryFrom<&'a RiStr<S>> for &'a RiAbsoluteStr<S>

type Error = Error

The type returned in the event of a conversion error.

fn try_from(s: &'a RiStr<S>) -> Result<Self, Self::Error>

Performs the conversion.

impl<'a, S: Spec> TryFrom<&'a str> for &'a RiStr<S>

type Error = Error

The type returned in the event of a conversion error.

fn try_from(s: &'a str) -> Result<Self, Self::Error>

Performs the conversion.

impl<S: Spec> Eq for RiStr<S>