Struct iri_string::types::RiAbsoluteString

pub struct RiAbsoluteString<S> { /* private fields */ }

Available on crate feature alloc only.

An owned string of an absolute IRI without fragment part.

This corresponds to absolute-IRI rule in RFC 3987 (and absolute-URI rule in RFC 3986). The rule for absolute-IRI is scheme ":" ihier-part [ "?" iquery ]. In other words, this is RiString without fragment part.

If you want to accept fragment part, use RiString.

For details, see the document for RiAbsoluteStr.

Enabled by alloc or std feature.

Implementations

impl<S: Spec> RiAbsoluteString<S>

pub fn shrink_to_fit(&mut self)

Shrinks the capacity of the inner buffer to match its length.

pub fn capacity(&self) -> usize

Returns the internal buffer capacity in bytes.

pub fn as_slice(&self) -> &RiAbsoluteStr<S>

Returns the borrowed IRI string slice.

This is equivalent to &*self.

impl<S: Spec> RiAbsoluteString<S>

pub fn remove_password_inline(&mut self)

Removes the password completely (including separator colon) from self even if it is empty.

Examples

use iri_string::types::IriAbsoluteString;

let mut iri = IriAbsoluteString::try_from("http://user:password@example.com/path?query")?;
iri.remove_password_inline();
assert_eq!(iri, "http://user@example.com/path?query");

Even if the password is empty, the password and separator will be removed.

use iri_string::types::IriAbsoluteString;

let mut iri = IriAbsoluteString::try_from("http://user:@example.com/path?query")?;
iri.remove_password_inline();
assert_eq!(iri, "http://user@example.com/path?query");

pub fn remove_nonempty_password_inline(&mut self)

Replaces the non-empty password in self to the empty password.

This leaves the separator colon if the password part was available.

Examples

use iri_string::types::IriAbsoluteString;

let mut iri = IriAbsoluteString::try_from("http://user:password@example.com/path?query")?;
iri.remove_nonempty_password_inline();
assert_eq!(iri, "http://user:@example.com/path?query");

If the password is empty, it is left as is.

use iri_string::types::IriAbsoluteString;

let mut iri = IriAbsoluteString::try_from("http://user:@example.com/path?query")?;
iri.remove_nonempty_password_inline();
assert_eq!(iri, "http://user:@example.com/path?query");

impl RiAbsoluteString<IriSpec>

Conversion from an IRI into a URI.

pub fn encode_to_uri_inline(&mut self)

Percent-encodes the IRI into a valid URI that identifies the equivalent resource.

After the encode, the IRI is also a valid URI.

If you want a new URI string rather than modifying the IRI string, or if you need more precise control over memory allocation and buffer handling, use encode_to_uri method.

Panics

Panics if the memory allocation failed.

Examples

#[cfg(feature = "alloc")] {
use iri_string::types::IriAbsoluteString;

let mut iri = IriAbsoluteString::try_from("http://example.com/?alpha=\u{03B1}")?;
iri.encode_to_uri_inline();
assert_eq!(iri, "http://example.com/?alpha=%CE%B1");

pub fn try_encode_to_uri_inline(&mut self) -> Result<(), TryReserveError>

Percent-encodes the IRI into a valid URI that identifies the equivalent resource.

After the encode, the IRI is also a valid URI.

If you want a new URI string rather than modifying the IRI string, or if you need more precise control over memory allocation and buffer handling, use encode_to_uri method.

Examples

#[cfg(feature = "alloc")] {
use iri_string::types::IriAbsoluteString;

let mut iri = IriAbsoluteString::try_from("http://example.com/?alpha=\u{03B1}")?;
iri.try_encode_to_uri_inline()
    .expect("failed to allocate memory");
assert_eq!(iri, "http://example.com/?alpha=%CE%B1");

pub fn encode_into_uri(self) -> UriAbsoluteString

Percent-encodes the IRI into a valid URI that identifies the equivalent resource.

If you want a new URI string rather than modifying the IRI string, or if you need more precise control over memory allocation and buffer handling, use encode_to_uri method.

Examples

#[cfg(feature = "alloc")] {
use iri_string::types::{IriAbsoluteString, UriAbsoluteString};

let iri = IriAbsoluteString::try_from("http://example.com/?alpha=\u{03B1}")?;
// Type annotation here is not necessary.
let uri: UriAbsoluteString = iri.encode_into_uri();
assert_eq!(uri, "http://example.com/?alpha=%CE%B1");

pub fn try_encode_into_uri(self) -> Result<UriAbsoluteString, TryReserveError>

Percent-encodes the IRI into a valid URI that identifies the equivalent resource.

If you want a new URI string rather than modifying the IRI string, or if you need more precise control over memory allocation and buffer handling, use encode_to_uri method.

Examples

#[cfg(feature = "alloc")] {
use iri_string::types::{IriAbsoluteString, UriAbsoluteString};

let iri = IriAbsoluteString::try_from("http://example.com/?alpha=\u{03B1}")?;
// Type annotation here is not necessary.
let uri: UriAbsoluteString = iri.try_encode_into_uri()
    .expect("failed to allocate memory");
assert_eq!(uri, "http://example.com/?alpha=%CE%B1");

pub fn try_into_uri(self) -> Result<UriAbsoluteString, IriAbsoluteString>

Converts an IRI into a URI without modification, if possible.

Examples

use iri_string::types::{IriAbsoluteString, UriAbsoluteString};

let ascii_iri = IriAbsoluteString::try_from("http://example.com/?alpha=%CE%B1")?;
assert_eq!(
    ascii_iri.try_into_uri().map(|uri| uri.to_string()),
    Ok("http://example.com/?alpha=%CE%B1".to_string())
);

let nonascii_iri = IriAbsoluteString::try_from("http://example.com/?alpha=\u{03B1}")?;
assert_eq!(
    nonascii_iri.try_into_uri().map_err(|iri| iri.to_string()),
    Err("http://example.com/?alpha=\u{03B1}".to_string())
);

Methods from Deref<Target = RiAbsoluteStr<S>>

pub fn as_str(&self) -> &str

Returns &str.

pub fn len(&self) -> usize

Returns the string length.

pub fn is_empty(&self) -> bool

Returns whether the string is empty.

pub fn ensure_rfc3986_normalizable(&self) -> Result<(), Error>

Returns Ok(()) if the IRI is normalizable by the RFC 3986 algorithm.

Examples

use iri_string::types::IriAbsoluteStr;

let iri = IriAbsoluteStr::new("HTTP://example.COM/foo/%2e/bar/..")?;
assert!(iri.ensure_rfc3986_normalizable().is_ok());

let iri2 = IriAbsoluteStr::new("scheme:/..//bar")?;
// The normalization result would be `scheme://bar` according to RFC
// 3986, but it is unintended and should be treated as a failure.
// This crate automatically handles this case so that `.normalize()` won't fail.
assert!(!iri.ensure_rfc3986_normalizable().is_err());

pub fn is_normalized(&self) -> bool

Returns true if the IRI is already normalized.

This returns the same result as self.normalize().to_string() == self, but does this more efficiently without heap allocation.

Examples

use iri_string::format::ToDedicatedString;
use iri_string::types::IriAbsoluteStr;

let iri = IriAbsoluteStr::new("HTTP://example.COM/foo/./bar/%2e%2e/../baz?query")?;
assert!(!iri.is_normalized());

let normalized = iri.normalize().to_dedicated_string();
assert_eq!(normalized, "http://example.com/baz?query");
assert!(normalized.is_normalized());

use iri_string::format::ToDedicatedString;
use iri_string::types::IriAbsoluteStr;

let iri = IriAbsoluteStr::new("scheme:/.///foo")?;
// Already normalized.
assert!(iri.is_normalized());

use iri_string::format::ToDedicatedString;
use iri_string::types::IriAbsoluteStr;

let iri = IriAbsoluteStr::new("scheme:relative/..//not-a-host")?;
// Default normalization algorithm assumes the path part to be NOT opaque.
assert!(!iri.is_normalized());

let normalized = iri.normalize().to_dedicated_string();
assert_eq!(normalized, "scheme:/.//not-a-host");

pub fn is_normalized_rfc3986(&self) -> bool

Returns true if the IRI is already normalized.

This returns the same result as self.ensure_rfc3986_normalizable() && (self.normalize().to_string() == self), does this more efficiently without heap allocation.

Examples

use iri_string::format::ToDedicatedString;
use iri_string::types::IriAbsoluteStr;

let iri = IriAbsoluteStr::new("HTTP://example.COM/foo/./bar/%2e%2e/../baz?query")?;
assert!(!iri.is_normalized_rfc3986());

let normalized = iri.normalize().to_dedicated_string();
assert_eq!(normalized, "http://example.com/baz?query");
assert!(normalized.is_normalized_rfc3986());

use iri_string::format::ToDedicatedString;
use iri_string::types::IriAbsoluteStr;

let iri = IriAbsoluteStr::new("scheme:/.///foo")?;
// Not normalized in the sense of RFC 3986.
assert!(!iri.is_normalized_rfc3986());

use iri_string::format::ToDedicatedString;
use iri_string::types::IriAbsoluteStr;

let iri = IriAbsoluteStr::new("scheme:relative/..//not-a-host")?;
// RFC 3986 normalization algorithm assumes the path part to be NOT opaque.
assert!(!iri.is_normalized_rfc3986());

let normalized = iri.normalize().to_dedicated_string();
assert_eq!(normalized, "scheme:/.//not-a-host");

pub fn is_normalized_but_authorityless_relative_path_preserved(&self) -> bool

Returns true if the IRI is already normalized in the sense of normalize_but_preserve_authorityless_relative_path method.

This returns the same result as self.normalize_but_preserve_authorityless_relative_path().to_string() == self, but does this more efficiently without heap allocation.

Examples

use iri_string::format::ToDedicatedString;
use iri_string::types::IriAbsoluteStr;

let iri = IriAbsoluteStr::new("HTTP://example.COM/foo/./bar/%2e%2e/../baz?query")?;
assert!(!iri.is_normalized_but_authorityless_relative_path_preserved());

let normalized = iri
    .normalize_but_preserve_authorityless_relative_path()
    .to_dedicated_string();
assert_eq!(normalized, "http://example.com/baz?query");
assert!(normalized.is_normalized());

use iri_string::format::ToDedicatedString;
use iri_string::types::IriAbsoluteStr;

let iri = IriAbsoluteStr::new("scheme:/.///foo")?;
// Already normalized in the sense of
// `normalize_but_opaque_authorityless_relative_path()` method.
assert!(iri.is_normalized_but_authorityless_relative_path_preserved());

use iri_string::format::ToDedicatedString;
use iri_string::types::IriAbsoluteStr;

let iri = IriAbsoluteStr::new("scheme:relative/..//not-a-host")?;
// Relative path is treated as opaque since the autority component is absent.
assert!(iri.is_normalized_but_authorityless_relative_path_preserved());

pub fn normalize(&self) -> Normalized<'_, Self>

Returns the normalized IRI.

Examples

use iri_string::format::ToDedicatedString;
use iri_string::types::IriAbsoluteStr;

let iri = IriAbsoluteStr::new("HTTP://example.COM/foo/./bar/%2e%2e/../baz?query")?;

let normalized = iri.normalize().to_dedicated_string();
assert_eq!(normalized, "http://example.com/baz?query");

pub fn normalize_but_preserve_authorityless_relative_path(
    &self
) -> Normalized<'_, Self>

Returns the normalized IRI, but preserving dot segments in relative path if the authority component is absent.

This normalization would be similar to that of WHATWG URL Standard while this implementation is not guaranteed to stricly follow the spec.

Note that this normalization algorithm is not compatible with RFC 3986 algorithm for some inputs.

Note that case normalization and percent-encoding normalization will still be applied to any path.

Examples

use iri_string::format::ToDedicatedString;
use iri_string::types::IriAbsoluteStr;

let iri = IriAbsoluteStr::new("HTTP://example.COM/foo/./bar/%2e%2e/../baz?query")?;

let normalized = iri
    .normalize_but_preserve_authorityless_relative_path()
    .to_dedicated_string();
assert_eq!(normalized, "http://example.com/baz?query");

use iri_string::format::ToDedicatedString;
use iri_string::types::IriAbsoluteStr;

let iri = IriAbsoluteStr::new("scheme:relative/../f%6f%6f")?;

let normalized = iri
    .normalize_but_preserve_authorityless_relative_path()
    .to_dedicated_string();
assert_eq!(normalized, "scheme:relative/../foo");
// `.normalize()` would normalize this to `scheme:/foo`.

pub fn mask_password(&self) -> PasswordMasked<'_, Self>

Returns the proxy to the IRI with password masking feature.

Examples

use iri_string::format::ToDedicatedString;
use iri_string::types::IriAbsoluteStr;

let iri = IriAbsoluteStr::new("http://user:password@example.com/path?query")?;
let masked = iri.mask_password();
assert_eq!(masked.to_dedicated_string(), "http://user:@example.com/path?query");

assert_eq!(
    masked.replace_password("${password}").to_string(),
    "http://user:${password}@example.com/path?query"
);

pub fn scheme_str(&self) -> &str

Returns the scheme.

The following colon is truncated.

Examples

use iri_string::types::IriAbsoluteStr;

let iri = IriAbsoluteStr::new("http://example.com/pathpath?queryquery")?;
assert_eq!(iri.scheme_str(), "http");

pub fn authority_str(&self) -> Option<&str>

Returns the authority.

The leading // is truncated.

Examples

use iri_string::types::IriAbsoluteStr;

let iri = IriAbsoluteStr::new("http://example.com/pathpath?queryquery")?;
assert_eq!(iri.authority_str(), Some("example.com"));

use iri_string::types::IriAbsoluteStr;

let iri = IriAbsoluteStr::new("urn:uuid:10db315b-fcd1-4428-aca8-15babc9a2da2")?;
assert_eq!(iri.authority_str(), None);

pub fn path_str(&self) -> &str

Returns the path.

Examples

use iri_string::types::IriAbsoluteStr;

let iri = IriAbsoluteStr::new("http://example.com/pathpath?queryquery")?;
assert_eq!(iri.path_str(), "/pathpath");

use iri_string::types::IriAbsoluteStr;

let iri = IriAbsoluteStr::new("urn:uuid:10db315b-fcd1-4428-aca8-15babc9a2da2")?;
assert_eq!(iri.path_str(), "uuid:10db315b-fcd1-4428-aca8-15babc9a2da2");

pub fn query(&self) -> Option<&RiQueryStr<S>>

Returns the query.

The leading question mark (?) is truncated.

Examples

use iri_string::types::{IriAbsoluteStr, IriQueryStr};

let iri = IriAbsoluteStr::new("http://example.com/pathpath?queryquery")?;
let query = IriQueryStr::new("queryquery")?;
assert_eq!(iri.query(), Some(query));

use iri_string::types::IriAbsoluteStr;

let iri = IriAbsoluteStr::new("urn:uuid:10db315b-fcd1-4428-aca8-15babc9a2da2")?;
assert_eq!(iri.query(), None);

pub fn query_str(&self) -> Option<&str>

Returns the query in a raw string slice.

The leading question mark (?) is truncated.

Examples

use iri_string::types::IriAbsoluteStr;

let iri = IriAbsoluteStr::new("http://example.com/pathpath?queryquery")?;
assert_eq!(iri.query_str(), Some("queryquery"));

use iri_string::types::IriAbsoluteStr;

let iri = IriAbsoluteStr::new("urn:uuid:10db315b-fcd1-4428-aca8-15babc9a2da2")?;
assert_eq!(iri.query_str(), None);

pub fn authority_components(&self) -> Option<AuthorityComponents<'_>>

Returns the authority components.

Examples

use iri_string::types::IriAbsoluteStr;

let iri = IriAbsoluteStr::new("http://user:pass@example.com:8080/pathpath?queryquery")?;
let authority = iri.authority_components()
    .expect("authority is available");
assert_eq!(authority.userinfo(), Some("user:pass"));
assert_eq!(authority.host(), "example.com");
assert_eq!(authority.port(), Some("8080"));

use iri_string::types::IriAbsoluteStr;

let iri = IriAbsoluteStr::new("urn:uuid:10db315b-fcd1-4428-aca8-15babc9a2da2")?;
assert_eq!(iri.authority_str(), None);

pub fn encode_to_uri(&self) -> MappedToUri<'_, Self>

Percent-encodes the IRI into a valid URI that identifies the equivalent resource.

If you need more precise control over memory allocation and buffer handling, use MappedToUri type.

Examples

use iri_string::format::ToDedicatedString;
use iri_string::types::{IriAbsoluteStr, UriAbsoluteString};

let iri = IriAbsoluteStr::new("http://example.com/?alpha=\u{03B1}")?;
// Type annotation here is not necessary.
let uri: UriAbsoluteString = iri.encode_to_uri().to_dedicated_string();
assert_eq!(uri, "http://example.com/?alpha=%CE%B1");

pub fn as_uri(&self) -> Option<&UriAbsoluteStr>

Converts an IRI into a URI without modification, if possible.

This is semantically equivalent to UriAbsoluteStr::new(self.as_str()).ok().

Examples

use iri_string::types::{IriAbsoluteStr, UriAbsoluteStr};

let ascii_iri = IriAbsoluteStr::new("http://example.com/?alpha=%CE%B1")?;
assert_eq!(
    ascii_iri.as_uri().map(AsRef::as_ref),
    Some("http://example.com/?alpha=%CE%B1")
);

let nonascii_iri = IriAbsoluteStr::new("http://example.com/?alpha=\u{03B1}")?;
assert_eq!(nonascii_iri.as_uri(), None);

Trait Implementations

impl<S: Spec> AsRef<RiAbsoluteStr<S>> for RiAbsoluteString<S>

fn as_ref(&self) -> &RiAbsoluteStr<S>

Converts this type into a shared reference of the (usually inferred) input type.

impl<S: Spec> AsRef<RiReferenceStr<S>> for RiAbsoluteString<S>

fn as_ref(&self) -> &RiReferenceStr<S>

Converts this type into a shared reference of the (usually inferred) input type.

impl<S: Spec> AsRef<RiStr<S>> for RiAbsoluteString<S>

fn as_ref(&self) -> &RiStr<S>

Converts this type into a shared reference of the (usually inferred) input type.

impl<S: Spec> AsRef<str> for RiAbsoluteString<S>

fn as_ref(&self) -> &str

Converts this type into a shared reference of the (usually inferred) input type.

impl<S: Spec> Borrow<RiAbsoluteStr<S>> for RiAbsoluteString<S>

fn borrow(&self) -> &RiAbsoluteStr<S>

Immutably borrows from an owned value.

impl<S: Spec> Borrow<str> for RiAbsoluteString<S>

fn borrow(&self) -> &str

Immutably borrows from an owned value.

impl<S: Spec> Clone for RiAbsoluteString<S>

fn clone(&self) -> Self

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<S: Spec> Debug for RiAbsoluteString<S>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<S: Spec> Deref for RiAbsoluteString<S>

type Target = RiAbsoluteStr<S>

The resulting type after dereferencing.

fn deref(&self) -> &RiAbsoluteStr<S>

Dereferences the value.

impl<'de, S: Spec> Deserialize<'de> for RiAbsoluteString<S>

Available on crate feature serde only.

fn deserialize<D>(deserializer: D) -> Result<Self, D::Error>where
    D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl<S: Spec> Display for RiAbsoluteString<S>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<'a, S: Spec> From<&'a RiAbsoluteString<S>> for MappedToUri<'a, RiAbsoluteStr<S>>

fn from(iri: &'a RiAbsoluteString<S>) -> Self

Converts to this type from the input type.

impl<S: Spec> From<&Built<'_, RiAbsoluteStr<S>>> for RiAbsoluteString<S>

fn from(builder: &Built<'_, RiAbsoluteStr<S>>) -> Self

Converts to this type from the input type.

impl<S: Spec> From<&Normalized<'_, RiAbsoluteStr<S>>> for RiAbsoluteString<S>

fn from(v: &Normalized<'_, RiAbsoluteStr<S>>) -> Self

Converts to this type from the input type.

impl<S: Spec> From<&RiAbsoluteStr<S>> for RiAbsoluteString<S>

fn from(s: &RiAbsoluteStr<S>) -> Self

Converts to this type from the input type.

impl<S: Spec> From<Built<'_, RiAbsoluteStr<S>>> for RiAbsoluteString<S>

fn from(builder: Built<'_, RiAbsoluteStr<S>>) -> Self

Converts to this type from the input type.

impl<S: Spec> From<Normalized<'_, RiAbsoluteStr<S>>> for RiAbsoluteString<S>

fn from(v: Normalized<'_, RiAbsoluteStr<S>>) -> Self

Converts to this type from the input type.

impl<S: Spec> From<RiAbsoluteString<S>> for Box<RiAbsoluteStr<S>>

fn from(s: RiAbsoluteString<S>) -> Box<RiAbsoluteStr<S>>

Converts to this type from the input type.

impl<'a, S: Spec> From<RiAbsoluteString<S>> for Cow<'a, RiAbsoluteStr<S>>

fn from(s: RiAbsoluteString<S>) -> Cow<'a, RiAbsoluteStr<S>>

Converts to this type from the input type.

impl<S: Spec> From<RiAbsoluteString<S>> for RiReferenceString<S>

fn from(s: RiAbsoluteString<S>) -> RiReferenceString<S>

Converts to this type from the input type.

impl<S: Spec> From<RiAbsoluteString<S>> for RiString<S>

fn from(s: RiAbsoluteString<S>) -> RiString<S>

Converts to this type from the input type.

impl<S: Spec> From<RiAbsoluteString<S>> for String

fn from(s: RiAbsoluteString<S>) -> Self

Converts to this type from the input type.

impl From<RiAbsoluteString<UriSpec>> for IriAbsoluteString

fn from(uri: UriAbsoluteString) -> Self

Converts to this type from the input type.

impl<S: Spec> FromStr for RiAbsoluteString<S>

type Err = Error

The associated error which can be returned from parsing.

fn from_str(s: &str) -> Result<Self, Self::Err>

Parses a string s to return a value of this type.

impl<S: Spec> Hash for RiAbsoluteString<S>

fn hash<H: Hasher>(&self, state: &mut H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)where
    H: Hasher,

Feeds a slice of this type into the given Hasher.

impl<S: Spec> Ord for RiAbsoluteString<S>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Selfwhere
    Self: PartialOrd<Self>,

Restrict a value to a certain interval.

impl<S: Spec, T: Spec> PartialEq<&RiAbsoluteStr<S>> for RiAbsoluteString<T>

fn eq(&self, o: &&RiAbsoluteStr<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<S: Spec, T: Spec> PartialEq<&RiReferenceStr<T>> for RiAbsoluteString<S>

fn eq(&self, o: &&RiReferenceStr<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<S: Spec, T: Spec> PartialEq<&RiStr<T>> for RiAbsoluteString<S>

fn eq(&self, o: &&RiStr<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<S: Spec> PartialEq<&str> for RiAbsoluteString<S>

fn eq(&self, o: &&str) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<S: Spec, T: Spec> PartialEq<Cow<'_, RiAbsoluteStr<S>>> for RiAbsoluteString<T>

fn eq(&self, o: &Cow<'_, RiAbsoluteStr<S>>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<S: Spec, T: Spec> PartialEq<Cow<'_, RiReferenceStr<T>>> for RiAbsoluteString<S>

fn eq(&self, o: &Cow<'_, RiReferenceStr<T>>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<S: Spec, T: Spec> PartialEq<Cow<'_, RiStr<T>>> for RiAbsoluteString<S>

fn eq(&self, o: &Cow<'_, RiStr<T>>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<S: Spec> PartialEq<Cow<'_, str>> for RiAbsoluteString<S>

fn eq(&self, o: &Cow<'_, str>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<S: Spec, T: Spec> PartialEq<RiAbsoluteStr<S>> for RiAbsoluteString<T>

fn eq(&self, o: &RiAbsoluteStr<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<S: Spec, T: Spec> PartialEq<RiAbsoluteString<S>> for &RiReferenceStr<T>

fn eq(&self, o: &RiAbsoluteString<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<S: Spec, T: Spec> PartialEq<RiAbsoluteString<S>> for &RiStr<T>

fn eq(&self, o: &RiAbsoluteString<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<S: Spec> PartialEq<RiAbsoluteString<S>> for &str

fn eq(&self, o: &RiAbsoluteString<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<S: Spec, T: Spec> PartialEq<RiAbsoluteString<S>> for Cow<'_, RiReferenceStr<T>>

fn eq(&self, o: &RiAbsoluteString<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<S: Spec, T: Spec> PartialEq<RiAbsoluteString<S>> for Cow<'_, RiStr<T>>

fn eq(&self, o: &RiAbsoluteString<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<S: Spec> PartialEq<RiAbsoluteString<S>> for Cow<'_, str>

fn eq(&self, o: &RiAbsoluteString<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<S: Spec, T: Spec> PartialEq<RiAbsoluteString<S>> for RiReferenceStr<T>

fn eq(&self, o: &RiAbsoluteString<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<S: Spec, T: Spec> PartialEq<RiAbsoluteString<S>> for RiReferenceString<T>

fn eq(&self, o: &RiAbsoluteString<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<S: Spec, T: Spec> PartialEq<RiAbsoluteString<S>> for RiStr<T>

fn eq(&self, o: &RiAbsoluteString<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<S: Spec, T: Spec> PartialEq<RiAbsoluteString<S>> for RiString<T>

fn eq(&self, o: &RiAbsoluteString<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<S: Spec> PartialEq<RiAbsoluteString<S>> for String

fn eq(&self, o: &RiAbsoluteString<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<S: Spec> PartialEq<RiAbsoluteString<S>> for str

fn eq(&self, o: &RiAbsoluteString<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<S: Spec, T: Spec> PartialEq<RiAbsoluteString<T>> for &RiAbsoluteStr<S>

fn eq(&self, o: &RiAbsoluteString<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<S: Spec, T: Spec> PartialEq<RiAbsoluteString<T>> for Cow<'_, RiAbsoluteStr<S>>

fn eq(&self, o: &RiAbsoluteString<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<S: Spec, T: Spec> PartialEq<RiAbsoluteString<T>> for RiAbsoluteStr<S>

fn eq(&self, o: &RiAbsoluteString<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<S: Spec, T: Spec> PartialEq<RiAbsoluteString<T>> for RiAbsoluteString<S>

fn eq(&self, other: &RiAbsoluteString<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<S: Spec, T: Spec> PartialEq<RiReferenceStr<T>> for RiAbsoluteString<S>

fn eq(&self, o: &RiReferenceStr<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<S: Spec, T: Spec> PartialEq<RiReferenceString<T>> for RiAbsoluteString<S>

fn eq(&self, o: &RiReferenceString<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<S: Spec, T: Spec> PartialEq<RiStr<T>> for RiAbsoluteString<S>

fn eq(&self, o: &RiStr<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<S: Spec, T: Spec> PartialEq<RiString<T>> for RiAbsoluteString<S>

fn eq(&self, o: &RiString<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<S: Spec> PartialEq<String> for RiAbsoluteString<S>

fn eq(&self, o: &String) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<S: Spec> PartialEq<str> for RiAbsoluteString<S>

fn eq(&self, o: &str) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<S: Spec, T: Spec> PartialOrd<&RiAbsoluteStr<S>> for RiAbsoluteString<T>

fn partial_cmp(&self, o: &&RiAbsoluteStr<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<&RiReferenceStr<T>> for RiAbsoluteString<S>

fn partial_cmp(&self, o: &&RiReferenceStr<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<&RiStr<T>> for RiAbsoluteString<S>

fn partial_cmp(&self, o: &&RiStr<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec> PartialOrd<&str> for RiAbsoluteString<S>

fn partial_cmp(&self, o: &&str) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<Cow<'_, RiAbsoluteStr<S>>> for RiAbsoluteString<T>

fn partial_cmp(&self, o: &Cow<'_, RiAbsoluteStr<S>>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<Cow<'_, RiReferenceStr<T>>> for RiAbsoluteString<S>

fn partial_cmp(&self, o: &Cow<'_, RiReferenceStr<T>>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<Cow<'_, RiStr<T>>> for RiAbsoluteString<S>

fn partial_cmp(&self, o: &Cow<'_, RiStr<T>>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec> PartialOrd<Cow<'_, str>> for RiAbsoluteString<S>

fn partial_cmp(&self, o: &Cow<'_, str>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiAbsoluteStr<S>> for RiAbsoluteString<T>

fn partial_cmp(&self, o: &RiAbsoluteStr<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiAbsoluteString<S>> for &RiReferenceStr<T>

fn partial_cmp(&self, o: &RiAbsoluteString<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiAbsoluteString<S>> for &RiStr<T>

fn partial_cmp(&self, o: &RiAbsoluteString<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec> PartialOrd<RiAbsoluteString<S>> for &str

fn partial_cmp(&self, o: &RiAbsoluteString<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiAbsoluteString<S>> for Cow<'_, RiReferenceStr<T>>

fn partial_cmp(&self, o: &RiAbsoluteString<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiAbsoluteString<S>> for Cow<'_, RiStr<T>>

fn partial_cmp(&self, o: &RiAbsoluteString<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec> PartialOrd<RiAbsoluteString<S>> for Cow<'_, str>

fn partial_cmp(&self, o: &RiAbsoluteString<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiAbsoluteString<S>> for RiReferenceStr<T>

fn partial_cmp(&self, o: &RiAbsoluteString<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiAbsoluteString<S>> for RiReferenceString<T>

fn partial_cmp(&self, o: &RiAbsoluteString<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiAbsoluteString<S>> for RiStr<T>

fn partial_cmp(&self, o: &RiAbsoluteString<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiAbsoluteString<S>> for RiString<T>

fn partial_cmp(&self, o: &RiAbsoluteString<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec> PartialOrd<RiAbsoluteString<S>> for String

fn partial_cmp(&self, o: &RiAbsoluteString<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec> PartialOrd<RiAbsoluteString<S>> for str

fn partial_cmp(&self, o: &RiAbsoluteString<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiAbsoluteString<T>> for &RiAbsoluteStr<S>

fn partial_cmp(&self, o: &RiAbsoluteString<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiAbsoluteString<T>> for Cow<'_, RiAbsoluteStr<S>>

fn partial_cmp(&self, o: &RiAbsoluteString<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiAbsoluteString<T>> for RiAbsoluteStr<S>

fn partial_cmp(&self, o: &RiAbsoluteString<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiAbsoluteString<T>> for RiAbsoluteString<S>

fn partial_cmp(&self, other: &RiAbsoluteString<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiReferenceStr<T>> for RiAbsoluteString<S>

fn partial_cmp(&self, o: &RiReferenceStr<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiReferenceString<T>> for RiAbsoluteString<S>

fn partial_cmp(&self, o: &RiReferenceString<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiStr<T>> for RiAbsoluteString<S>

fn partial_cmp(&self, o: &RiStr<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiString<T>> for RiAbsoluteString<S>

fn partial_cmp(&self, o: &RiString<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec> PartialOrd<String> for RiAbsoluteString<S>

fn partial_cmp(&self, o: &String) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec> PartialOrd<str> for RiAbsoluteString<S>

fn partial_cmp(&self, o: &str) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S> Serialize for RiAbsoluteString<S>where
    S: Spec,

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>where
    __S: Serializer,

Serialize this value into the given Serde serializer.

impl<S: Spec> TryFrom<&[u8]> for RiAbsoluteString<S>

type Error = Error

The type returned in the event of a conversion error.

fn try_from(bytes: &[u8]) -> Result<Self, Self::Error>

Performs the conversion.

impl<S: Spec> TryFrom<&str> for RiAbsoluteString<S>

type Error = Error

The type returned in the event of a conversion error.

fn try_from(s: &str) -> Result<Self, Self::Error>

Performs the conversion.

impl<S: Spec> TryFrom<RiReferenceString<S>> for RiAbsoluteString<S>

type Error = CreationError<RiReferenceString<S>>

The type returned in the event of a conversion error.

fn try_from(s: RiReferenceString<S>) -> Result<Self, Self::Error>

Performs the conversion.

impl<S: Spec> TryFrom<RiString<S>> for RiAbsoluteString<S>

type Error = CreationError<RiString<S>>

The type returned in the event of a conversion error.

fn try_from(s: RiString<S>) -> Result<Self, Self::Error>

Performs the conversion.

impl<S: Spec> TryFrom<String> for RiAbsoluteString<S>

type Error = CreationError<String>

The type returned in the event of a conversion error.

fn try_from(s: String) -> Result<Self, Self::Error>

Performs the conversion.

impl<S: Spec> Eq for RiAbsoluteString<S>