Struct matrix_sdk_base::ruma::OwnedClientSecret

pub struct OwnedClientSecret { /* private fields */ }

Owned variant of ClientSecret

The wrapper type for this type is variable, by default it’ll use Box, but you can change that by setting “--cfg=ruma_identifiers_storage=...” using RUSTFLAGS or .cargo/config.toml (under [build] -> rustflags = ["..."]) to the following;

• ruma_identifiers_storage="Arc" to use Arc as a wrapper type.

Methods from Deref<Target = ClientSecret>

pub fn as_str(&self) -> &str

Creates a string slice from this ClientSecret.

pub fn as_bytes(&self) -> &[u8]

Creates a byte slice from this ClientSecret.

Trait Implementations

impl AsRef<[u8]> for OwnedClientSecret

fn as_ref(&self) -> &[u8]

Converts this type into a shared reference of the (usually inferred) input type.

impl AsRef<ClientSecret> for OwnedClientSecret

fn as_ref(&self) -> &ClientSecret

Converts this type into a shared reference of the (usually inferred) input type.

impl AsRef<str> for OwnedClientSecret

fn as_ref(&self) -> &str

Converts this type into a shared reference of the (usually inferred) input type.

impl Borrow<ClientSecret> for OwnedClientSecret

fn borrow(&self) -> &ClientSecret

Immutably borrows from an owned value.

impl Clone for OwnedClientSecret

fn clone(&self) -> OwnedClientSecret

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for OwnedClientSecret

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Deref for OwnedClientSecret

type Target = ClientSecret

The resulting type after dereferencing.

fn deref(&self) -> &<OwnedClientSecret as Deref>::Target

Dereferences the value.

impl<'de> Deserialize<'de> for OwnedClientSecret

fn deserialize<D>( deserializer: D ) -> Result<OwnedClientSecret, <D as Deserializer<'de>>::Error>

where D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl Display for OwnedClientSecret

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl From<&ClientSecret> for OwnedClientSecret

fn from(id: &ClientSecret) -> OwnedClientSecret

Converts to this type from the input type.

impl From<Arc<ClientSecret>> for OwnedClientSecret

fn from(a: Arc<ClientSecret>) -> OwnedClientSecret

Converts to this type from the input type.

impl From<Box<ClientSecret>> for OwnedClientSecret

fn from(b: Box<ClientSecret>) -> OwnedClientSecret

Converts to this type from the input type.

impl From<OwnedClientSecret> for Arc<ClientSecret>

fn from(a: OwnedClientSecret) -> Arc<ClientSecret>

Converts to this type from the input type.

impl From<OwnedClientSecret> for Box<ClientSecret>

fn from(a: OwnedClientSecret) -> Box<ClientSecret>

Converts to this type from the input type.

impl From<OwnedClientSecret> for String

fn from(id: OwnedClientSecret) -> String

Converts to this type from the input type.

impl FromStr for OwnedClientSecret

type Err = Error

The associated error which can be returned from parsing.

fn from_str( s: &str ) -> Result<OwnedClientSecret, <OwnedClientSecret as FromStr>::Err>

Parses a string s to return a value of this type.

impl Hash for OwnedClientSecret

fn hash<H>(&self, state: &mut H)

where H: Hasher,

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl Ord for OwnedClientSecret

fn cmp(&self, other: &OwnedClientSecret) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized + PartialOrd,

Restrict a value to a certain interval.

impl PartialEq<&ClientSecret> for OwnedClientSecret

fn eq(&self, other: &&ClientSecret) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<&str> for OwnedClientSecret

fn eq(&self, other: &&str) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<Arc<ClientSecret>> for OwnedClientSecret

fn eq(&self, other: &Arc<ClientSecret>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<Box<ClientSecret>> for OwnedClientSecret

fn eq(&self, other: &Box<ClientSecret>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<ClientSecret> for OwnedClientSecret

fn eq(&self, other: &ClientSecret) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<OwnedClientSecret> for &ClientSecret

fn eq(&self, other: &OwnedClientSecret) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<OwnedClientSecret> for &str

fn eq(&self, other: &OwnedClientSecret) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<OwnedClientSecret> for ClientSecret

fn eq(&self, other: &OwnedClientSecret) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<OwnedClientSecret> for String

fn eq(&self, other: &OwnedClientSecret) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<OwnedClientSecret> for str

fn eq(&self, other: &OwnedClientSecret) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<String> for OwnedClientSecret

fn eq(&self, other: &String) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<str> for OwnedClientSecret

fn eq(&self, other: &str) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq for OwnedClientSecret

fn eq(&self, other: &OwnedClientSecret) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for OwnedClientSecret

fn partial_cmp(&self, other: &OwnedClientSecret) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl Serialize for OwnedClientSecret

fn serialize<S>( &self, serializer: S ) -> Result<<S as Serializer>::Ok, <S as Serializer>::Error>

where S: Serializer,

Serialize this value into the given Serde serializer.

impl TryFrom<&str> for OwnedClientSecret

type Error = Error

The type returned in the event of a conversion error.

fn try_from( s: &str ) -> Result<OwnedClientSecret, <OwnedClientSecret as TryFrom<&str>>::Error>

Performs the conversion.

impl TryFrom<String> for OwnedClientSecret

type Error = Error

The type returned in the event of a conversion error.

fn try_from( s: String ) -> Result<OwnedClientSecret, <OwnedClientSecret as TryFrom<String>>::Error>

Performs the conversion.

impl Eq for OwnedClientSecret