Struct BigInt

pub struct BigInt<M>
where
    M: ManagedTypeApi,
{ /* private fields */ }

Implementations

impl<M> BigInt<M>

where M: ManagedTypeApi,

pub unsafe fn new_uninit() -> BigInt<M>

Creates a new object, without initializing it.

Safety

The value needs to be initialized after creation, otherwise the VM will halt the first time the value is attempted to be read.

impl<M> BigInt<M>

where M: ManagedTypeApi,

pub fn zero() -> BigInt<M>

pub fn to_i64(&self) -> Option<i64>

pub fn overwrite_i64(&self, value: i64)

pub fn from_signed_bytes_be(bytes: &[u8]) -> BigInt<M>

pub fn to_signed_bytes_be(&self) -> BoxedBytes

pub fn from_signed_bytes_be_buffer( managed_buffer: &ManagedBuffer<M>, ) -> BigInt<M>

pub fn to_signed_bytes_be_buffer(&self) -> ManagedBuffer<M>

impl<M> BigInt<M>

where M: ManagedTypeApi,

pub fn from_biguint(sign: Sign, unsigned: BigUint<M>) -> BigInt<M>

pub fn sign(&self) -> Sign

Returns the sign of the BigInt as a Sign.

pub fn magnitude(&self) -> BigUint<M>

Returns the magnitude of the BigInt as a BigUint.

pub fn to_parts(self) -> (Sign, BigUint<M>)

Convert this BigInt into its Sign and BigUint magnitude, the reverse of BigInt::from_biguint.

pub unsafe fn into_big_uint_unchecked(self) -> BigUint<M>

Converts to an unsigned BigUint, without performing any checks.

Safety

If the number is negative, undefined behavior might occur further down the execution.

pub fn into_big_uint(self) -> ManagedOption<M, BigUint<M>>

Converts this BigInt into a BigUint, if it’s not negative.

impl<M> BigInt<M>

where M: ManagedTypeApi,

pub fn pow(&self, exp: u32) -> BigInt<M>

Trait Implementations

impl<'a, 'b, M> Add<&'b BigInt<M>> for &'a BigInt<M>

where M: ManagedTypeApi,

type Output = BigInt<M>

The resulting type after applying the + operator.

fn add(self, other: &BigInt<M>) -> BigInt<M>

Performs the + operation.

impl<'a, 'b, M> Add<&'b BigInt<M>> for &'a BigUint<M>

where M: ManagedTypeApi,

type Output = BigInt<M>

The resulting type after applying the + operator.

fn add(self, other: &BigInt<M>) -> BigInt<M>

Performs the + operation.

impl<'a, 'b, M> Add<&'b BigUint<M>> for &'a BigInt<M>

where M: ManagedTypeApi,

type Output = BigInt<M>

The resulting type after applying the + operator.

fn add(self, other: &BigUint<M>) -> BigInt<M>

Performs the + operation.

impl<M> Add<BigInt<M>> for BigUint<M>

where M: ManagedTypeApi,

type Output = BigInt<M>

The resulting type after applying the + operator.

fn add(self, other: BigInt<M>) -> BigInt<M>

Performs the + operation.

impl<M> Add<BigUint<M>> for BigInt<M>

where M: ManagedTypeApi,

type Output = BigInt<M>

The resulting type after applying the + operator.

fn add(self, other: BigUint<M>) -> BigInt<M>

Performs the + operation.

impl<M> Add for BigInt<M>

where M: ManagedTypeApi,

type Output = BigInt<M>

The resulting type after applying the + operator.

fn add(self, other: BigInt<M>) -> BigInt<M>

Performs the + operation.

impl<M> AddAssign<&BigInt<M>> for BigInt<M>

where M: ManagedTypeApi,

fn add_assign(&mut self, other: &BigInt<M>)

Performs the += operation.

impl<M> AddAssign for BigInt<M>

where M: ManagedTypeApi,

fn add_assign(&mut self, other: BigInt<M>)

Performs the += operation.

impl<M> Clone for BigInt<M>

where M: ManagedTypeApi,

fn clone(&self) -> BigInt<M>

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<M> Debug for BigInt<M>

where M: ManagedTypeApi,

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<M> Default for BigInt<M>

where M: ManagedTypeApi,

fn default() -> BigInt<M>

Returns the “default value” for a type.

impl<'a, 'b, M> Div<&'b BigInt<M>> for &'a BigInt<M>

where M: ManagedTypeApi,

type Output = BigInt<M>

The resulting type after applying the / operator.

fn div(self, other: &BigInt<M>) -> BigInt<M>

Performs the / operation.

impl<'a, 'b, M> Div<&'b BigInt<M>> for &'a BigUint<M>

where M: ManagedTypeApi,

type Output = BigInt<M>

The resulting type after applying the / operator.

fn div(self, other: &BigInt<M>) -> BigInt<M>

Performs the / operation.

impl<'a, 'b, M> Div<&'b BigUint<M>> for &'a BigInt<M>

where M: ManagedTypeApi,

type Output = BigInt<M>

The resulting type after applying the / operator.

fn div(self, other: &BigUint<M>) -> BigInt<M>

Performs the / operation.

impl<M> Div<BigInt<M>> for BigUint<M>

where M: ManagedTypeApi,

type Output = BigInt<M>

The resulting type after applying the / operator.

fn div(self, other: BigInt<M>) -> BigInt<M>

Performs the / operation.

impl<M> Div<BigUint<M>> for BigInt<M>

where M: ManagedTypeApi,

type Output = BigInt<M>

The resulting type after applying the / operator.

fn div(self, other: BigUint<M>) -> BigInt<M>

Performs the / operation.

impl<M> Div for BigInt<M>

where M: ManagedTypeApi,

type Output = BigInt<M>

The resulting type after applying the / operator.

fn div(self, other: BigInt<M>) -> BigInt<M>

Performs the / operation.

impl<M> DivAssign<&BigInt<M>> for BigInt<M>

where M: ManagedTypeApi,

fn div_assign(&mut self, other: &BigInt<M>)

Performs the /= operation.

impl<M> DivAssign for BigInt<M>

where M: ManagedTypeApi,

fn div_assign(&mut self, other: BigInt<M>)

Performs the /= operation.

impl<M> From<&BigInt<M>> for BigFloat<M>

where M: ManagedTypeApi,

fn from(item: &BigInt<M>) -> BigFloat<M>

Converts to this type from the input type.

impl<M> From<&ManagedBuffer<M>> for BigInt<M>

where M: ManagedTypeApi,

fn from(item: &ManagedBuffer<M>) -> BigInt<M>

Converts to this type from the input type.

impl<M> From<&BigInt> for BigInt<M>

where M: ManagedTypeApi,

fn from(alloc_big_int: &BigInt) -> BigInt<M>

Converts to this type from the input type.

impl<M> From<BigInt<M>> for BigFloat<M>

where M: ManagedTypeApi,

fn from(item: BigInt<M>) -> BigFloat<M>

Converts to this type from the input type.

impl<M, const DECIMALS: usize> From<BigInt<M>> for ManagedDecimalSigned<M, ConstDecimals<DECIMALS>>

where M: ManagedTypeApi,

fn from(value: BigInt<M>) -> ManagedDecimalSigned<M, ConstDecimals<DECIMALS>>

Converts to this type from the input type.

impl<M> From<BigUint<M>> for BigInt<M>

where M: ManagedTypeApi,

fn from(item: BigUint<M>) -> BigInt<M>

Converts to this type from the input type.

impl<M> From<ManagedBuffer<M>> for BigInt<M>

where M: ManagedTypeApi,

fn from(item: ManagedBuffer<M>) -> BigInt<M>

Converts to this type from the input type.

impl<M> From<BigInt> for BigInt<M>

where M: ManagedTypeApi,

fn from(alloc_big_int: BigInt) -> BigInt<M>

Converts to this type from the input type.

impl<M> From<i16> for BigInt<M>

where M: ManagedTypeApi,

fn from(value: i16) -> BigInt<M>

Converts to this type from the input type.

impl<M> From<i32> for BigInt<M>

where M: ManagedTypeApi,

fn from(value: i32) -> BigInt<M>

Converts to this type from the input type.

impl<M> From<i64> for BigInt<M>

where M: ManagedTypeApi,

fn from(value: i64) -> BigInt<M>

Converts to this type from the input type.

impl<M> From<i8> for BigInt<M>

where M: ManagedTypeApi,

fn from(value: i8) -> BigInt<M>

Converts to this type from the input type.

impl<M> From<isize> for BigInt<M>

where M: ManagedTypeApi,

fn from(value: isize) -> BigInt<M>

Converts to this type from the input type.

impl<M> ManagedType<M> for BigInt<M>

where M: ManagedTypeApi,

type OwnHandle = <M as HandleTypeInfo>::BigIntHandle

fn get_handle(&self) -> <M as HandleTypeInfo>::BigIntHandle

unsafe fn forget_into_handle(self) -> <BigInt<M> as ManagedType<M>>::OwnHandle

Forgets current object (does not run destructor), but extracts the handle.

fn transmute_from_handle_ref( handle_ref: &<M as HandleTypeInfo>::BigIntHandle, ) -> &BigInt<M>

Implement carefully, since the underlying transmutation is an unsafe operation. For types that wrap a handle to some VM-managed data, make sure the type only contains the handle (plus ZSTs if necessary). For types that just wrap another managed type it is easier, call for the wrapped object.

fn transmute_from_handle_ref_mut( handle_ref: &mut <M as HandleTypeInfo>::BigIntHandle, ) -> &mut BigInt<M>

fn get_raw_handle(&self) -> i32

fn as_ref(&self) -> ManagedRef<'_, M, Self>

impl<M> ManagedVecItem for BigInt<M>

where M: ManagedTypeApi,

const SKIPS_RESERIALIZATION: bool = false

If true, then the encoding of the item is identical to the payload, and no further conversion is necessary (the underlying buffer can be used as-is during serialization). False for all managed types, but true for basic types (like u32).

type PAYLOAD = ManagedVecItemPayloadBuffer<4>

Type managing the underlying binary representation in a ManagedVec..

type Ref<'a> = ManagedRef<'a, M, BigInt<M>>

Reference representation of the ManagedVec item.

fn read_from_payload( payload: &<BigInt<M> as ManagedVecItem>::PAYLOAD, ) -> BigInt<M>

Parses given bytes as a an owned object.

unsafe fn borrow_from_payload<'a>( payload: &<BigInt<M> as ManagedVecItem>::PAYLOAD, ) -> <BigInt<M> as ManagedVecItem>::Ref<'a>

Parses given bytes as a representation of the object, either owned, or a reference.

fn save_to_payload(self, payload: &mut <BigInt<M> as ManagedVecItem>::PAYLOAD)

Converts the object into bytes.

fn payload_size() -> usize

impl<'a, 'b, M> Mul<&'b BigInt<M>> for &'a BigInt<M>

where M: ManagedTypeApi,

type Output = BigInt<M>

The resulting type after applying the * operator.

fn mul(self, other: &BigInt<M>) -> BigInt<M>

Performs the * operation.

impl<'a, 'b, M> Mul<&'b BigInt<M>> for &'a BigUint<M>

where M: ManagedTypeApi,

type Output = BigInt<M>

The resulting type after applying the * operator.

fn mul(self, other: &BigInt<M>) -> BigInt<M>

Performs the * operation.

impl<'a, 'b, M> Mul<&'b BigUint<M>> for &'a BigInt<M>

where M: ManagedTypeApi,

type Output = BigInt<M>

The resulting type after applying the * operator.

fn mul(self, other: &BigUint<M>) -> BigInt<M>

Performs the * operation.

impl<M> Mul<BigInt<M>> for BigUint<M>

where M: ManagedTypeApi,

type Output = BigInt<M>

The resulting type after applying the * operator.

fn mul(self, other: BigInt<M>) -> BigInt<M>

Performs the * operation.

impl<M> Mul<BigUint<M>> for BigInt<M>

where M: ManagedTypeApi,

type Output = BigInt<M>

The resulting type after applying the * operator.

fn mul(self, other: BigUint<M>) -> BigInt<M>

Performs the * operation.

impl<M> Mul for BigInt<M>

where M: ManagedTypeApi,

type Output = BigInt<M>

The resulting type after applying the * operator.

fn mul(self, other: BigInt<M>) -> BigInt<M>

Performs the * operation.

impl<M> MulAssign<&BigInt<M>> for BigInt<M>

where M: ManagedTypeApi,

fn mul_assign(&mut self, other: &BigInt<M>)

Performs the *= operation.

impl<M> MulAssign for BigInt<M>

where M: ManagedTypeApi,

fn mul_assign(&mut self, other: BigInt<M>)

Performs the *= operation.

impl<M> Neg for BigInt<M>

where M: ManagedTypeApi,

type Output = BigInt<M>

The resulting type after applying the - operator.

fn neg(self) -> <BigInt<M> as Neg>::Output

Performs the unary - operation.

impl<M> NestedDecode for BigInt<M>

where M: ManagedTypeApi,

fn dep_decode_or_handle_err<I, H>( input: &mut I, h: H, ) -> Result<BigInt<M>, <H as DecodeErrorHandler>::HandledErr>

where I: NestedDecodeInput, H: DecodeErrorHandler,

Version of dep_decode that can handle errors as soon as they occur. For instance in can exit immediately and make sure that if it returns, it is a success. By not deferring error handling, this can lead to somewhat smaller bytecode.

fn dep_decode<I>(input: &mut I) -> Result<Self, DecodeError>

where I: NestedDecodeInput,

Attempt to deserialise the value from input, using the format of an object nested inside another structure. In case of success returns the deserialized value and the number of bytes consumed during the operation.

impl<M> NestedEncode for BigInt<M>

where M: ManagedTypeApi,

fn dep_encode_or_handle_err<O, H>( &self, dest: &mut O, h: H, ) -> Result<(), <H as EncodeErrorHandler>::HandledErr>

where O: NestedEncodeOutput, H: EncodeErrorHandler,

Version of dep_encode that can handle errors as soon as they occur. For instance in can exit immediately and make sure that if it returns, it is a success. By not deferring error handling, this can lead to somewhat smaller bytecode.

fn dep_encode<O>(&self, dest: &mut O) -> Result<(), EncodeError>

where O: NestedEncodeOutput,

NestedEncode to output, using the format of an object nested inside another structure. Does not provide compact version.

impl<M> Ord for BigInt<M>

where M: ManagedTypeApi,

fn cmp(&self, other: &BigInt<M>) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized,

Restrict a value to a certain interval.

impl<M> PartialEq<BigInt<M>> for BigFloat<M>

where M: ManagedTypeApi,

fn eq(&self, other: &BigInt<M>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<M> PartialEq<i32> for BigInt<M>

where M: ManagedTypeApi,

fn eq(&self, other: &i32) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<M> PartialEq<i64> for BigInt<M>

where M: ManagedTypeApi,

fn eq(&self, other: &i64) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<M> PartialEq<u32> for BigInt<M>

where M: ManagedTypeApi,

fn eq(&self, other: &u32) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<M> PartialEq<u64> for BigInt<M>

where M: ManagedTypeApi,

fn eq(&self, other: &u64) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<M> PartialEq for BigInt<M>

where M: ManagedTypeApi,

fn eq(&self, other: &BigInt<M>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<M> PartialOrd<BigInt<M>> for BigFloat<M>

where M: ManagedTypeApi,

fn partial_cmp(&self, other: &BigInt<M>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl<M> PartialOrd<i32> for BigInt<M>

where M: ManagedTypeApi,

fn partial_cmp(&self, other: &i32) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl<M> PartialOrd<i64> for BigInt<M>

where M: ManagedTypeApi,

fn partial_cmp(&self, other: &i64) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl<M> PartialOrd<u32> for BigInt<M>

where M: ManagedTypeApi,

fn partial_cmp(&self, other: &u32) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl<M> PartialOrd<u64> for BigInt<M>

where M: ManagedTypeApi,

fn partial_cmp(&self, other: &u64) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl<M> PartialOrd for BigInt<M>

where M: ManagedTypeApi,

fn partial_cmp(&self, other: &BigInt<M>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, 'b, M> Rem<&'b BigInt<M>> for &'a BigInt<M>

where M: ManagedTypeApi,

type Output = BigInt<M>

The resulting type after applying the % operator.

fn rem(self, other: &BigInt<M>) -> BigInt<M>

Performs the % operation.

impl<'a, 'b, M> Rem<&'b BigInt<M>> for &'a BigUint<M>

where M: ManagedTypeApi,

type Output = BigInt<M>

The resulting type after applying the % operator.

fn rem(self, other: &BigInt<M>) -> BigInt<M>

Performs the % operation.

impl<'a, 'b, M> Rem<&'b BigUint<M>> for &'a BigInt<M>

where M: ManagedTypeApi,

type Output = BigInt<M>

The resulting type after applying the % operator.

fn rem(self, other: &BigUint<M>) -> BigInt<M>

Performs the % operation.

impl<M> Rem<BigInt<M>> for BigUint<M>

where M: ManagedTypeApi,

type Output = BigInt<M>

The resulting type after applying the % operator.

fn rem(self, other: BigInt<M>) -> BigInt<M>

Performs the % operation.

impl<M> Rem<BigUint<M>> for BigInt<M>

where M: ManagedTypeApi,

type Output = BigInt<M>

The resulting type after applying the % operator.

fn rem(self, other: BigUint<M>) -> BigInt<M>

Performs the % operation.

impl<M> Rem for BigInt<M>

where M: ManagedTypeApi,

type Output = BigInt<M>

The resulting type after applying the % operator.

fn rem(self, other: BigInt<M>) -> BigInt<M>

Performs the % operation.

impl<M> RemAssign<&BigInt<M>> for BigInt<M>

where M: ManagedTypeApi,

fn rem_assign(&mut self, other: &BigInt<M>)

Performs the %= operation.

impl<M> RemAssign for BigInt<M>

where M: ManagedTypeApi,

fn rem_assign(&mut self, other: BigInt<M>)

Performs the %= operation.

impl<M> SCDisplay for BigInt<M>

where M: ManagedTypeApi,

fn fmt<F>(&self, f: &mut F)

where F: FormatByteReceiver,

impl<'a, 'b, M> Sub<&'b BigInt<M>> for &'a BigInt<M>

where M: ManagedTypeApi,

type Output = BigInt<M>

The resulting type after applying the - operator.

fn sub(self, other: &BigInt<M>) -> BigInt<M>

Performs the - operation.

impl<'a, 'b, M> Sub<&'b BigInt<M>> for &'a BigUint<M>

where M: ManagedTypeApi,

type Output = BigInt<M>

The resulting type after applying the - operator.

fn sub(self, other: &BigInt<M>) -> BigInt<M>

Performs the - operation.

impl<'a, 'b, M> Sub<&'b BigUint<M>> for &'a BigInt<M>

where M: ManagedTypeApi,

type Output = BigInt<M>

The resulting type after applying the - operator.

fn sub(self, other: &BigUint<M>) -> BigInt<M>

Performs the - operation.

impl<M> Sub<BigInt<M>> for BigUint<M>

where M: ManagedTypeApi,

type Output = BigInt<M>

The resulting type after applying the - operator.

fn sub(self, other: BigInt<M>) -> BigInt<M>

Performs the - operation.

impl<M> Sub<BigUint<M>> for BigInt<M>

where M: ManagedTypeApi,

type Output = BigInt<M>

The resulting type after applying the - operator.

fn sub(self, other: BigUint<M>) -> BigInt<M>

Performs the - operation.

impl<M> Sub for BigInt<M>

where M: ManagedTypeApi,

type Output = BigInt<M>

The resulting type after applying the - operator.

fn sub(self, other: BigInt<M>) -> BigInt<M>

Performs the - operation.

impl<M> SubAssign<&BigInt<M>> for BigInt<M>

where M: ManagedTypeApi,

fn sub_assign(&mut self, other: &BigInt<M>)

Performs the -= operation.

impl<M> SubAssign for BigInt<M>

where M: ManagedTypeApi,

fn sub_assign(&mut self, other: BigInt<M>)

Performs the -= operation.

impl<M> TopDecode for BigInt<M>

where M: ManagedTypeApi,

fn top_decode_or_handle_err<I, H>( input: I, h: H, ) -> Result<BigInt<M>, <H as DecodeErrorHandler>::HandledErr>

where I: TopDecodeInput, H: DecodeErrorHandler,

Version of top_decode that can handle errors as soon as they occur. For instance it can exit immediately and make sure that if it returns, it is a success. By not deferring error handling, this can lead to somewhat smaller bytecode.

fn top_decode<I>(input: I) -> Result<Self, DecodeError>

where I: TopDecodeInput,

Attempt to deserialize the value from input.

impl<M> TopEncode for BigInt<M>

where M: ManagedTypeApi,

fn top_encode_or_handle_err<O, H>( &self, output: O, h: H, ) -> Result<(), <H as EncodeErrorHandler>::HandledErr>

where O: TopEncodeOutput, H: EncodeErrorHandler,

Version of top_encode that can handle errors as soon as they occur. For instance in can exit immediately and make sure that if it returns, it is a success. By not deferring error handling, this can lead to somewhat smaller bytecode.

fn top_encode<O>(&self, output: O) -> Result<(), EncodeError>

where O: TopEncodeOutput,

Attempt to serialize the value to ouput.

impl<M> TryStaticCast for BigInt<M>

where M: ManagedTypeApi,

fn type_eq<U>() -> bool

where U: TryStaticCast,

fn try_cast<U>(self) -> Option<U>

where U: TryStaticCast,

fn try_cast_ref<U>(&self) -> Option<&U>

where U: TryStaticCast,

impl<M> TypeAbi for BigInt<M>

where M: ManagedTypeApi,

type Unmanaged = BigInt

fn type_name() -> String

fn type_name_rust() -> String

fn type_names() -> TypeNames

fn provide_type_descriptions<TDC>(accumulator: &mut TDC)

where TDC: TypeDescriptionContainer,

A type can provide more than its own name. For instance, a struct can also provide the descriptions of the type of its fields. TypeAbi doesn’t care for the exact accumulator type, which is abstracted by the TypeDescriptionContainer trait.

impl<M> Eq for BigInt<M>

where M: ManagedTypeApi,

impl<M> TypeAbiFrom<&BigInt<M>> for BigInt<M>

where M: ManagedTypeApi,

impl<M> TypeAbiFrom<&i16> for BigInt<M>

where M: ManagedTypeApi,

impl<M> TypeAbiFrom<&i32> for BigInt<M>

where M: ManagedTypeApi,

impl<M> TypeAbiFrom<&i64> for BigInt<M>

where M: ManagedTypeApi,

impl<M> TypeAbiFrom<&i8> for BigInt<M>

where M: ManagedTypeApi,

impl<M> TypeAbiFrom<&isize> for BigInt<M>

where M: ManagedTypeApi,

impl<M> TypeAbiFrom<BigInt<M>> for BigInt<M>

where M: ManagedTypeApi,

impl<M> TypeAbiFrom<BigInt<M>> for BigInt

where M: ManagedTypeApi,

impl<M> TypeAbiFrom<BigInt> for BigInt<M>

where M: ManagedTypeApi,

impl<M> TypeAbiFrom<i16> for BigInt<M>

where M: ManagedTypeApi,

impl<M> TypeAbiFrom<i32> for BigInt<M>

where M: ManagedTypeApi,

impl<M> TypeAbiFrom<i64> for BigInt<M>

where M: ManagedTypeApi,

impl<M> TypeAbiFrom<i8> for BigInt<M>

where M: ManagedTypeApi,

impl<M> TypeAbiFrom<isize> for BigInt<M>

where M: ManagedTypeApi,