Struct no_std_net::Ipv4Addr

pub struct Ipv4Addr { /* fields omitted */ }

An IPv4 address.

IPv4 addresses are defined as 32-bit integers in IETF RFC 791. They are usually represented as four octets.

See IpAddr for a type encompassing both IPv4 and IPv6 addresses.

Textual representation

Ipv4Addr provides a FromStr implementation. The four octets are in decimal notation, divided by . (this is called "dot-decimal notation").

Examples

use no_std_net::Ipv4Addr;

let localhost = Ipv4Addr::new(127, 0, 0, 1);
assert_eq!("127.0.0.1".parse(), Ok(localhost));
assert_eq!(localhost.is_loopback(), true);

Implementations

impl Ipv4Addr

pub const fn new(a: u8, b: u8, c: u8, d: u8) -> Ipv4Addr

Creates a new IPv4 address from four eight-bit octets.

The result will represent the IP address a.b.c.d.

Examples

use no_std_net::Ipv4Addr;

let addr = Ipv4Addr::new(127, 0, 0, 1);

pub const fn localhost() -> Ipv4Addr

Creates a new IPv4 address with the address pointing to localhost: 127.0.0.1.

Examples

use no_std_net::Ipv4Addr;

let addr = Ipv4Addr::localhost();
assert_eq!(addr, Ipv4Addr::new(127, 0, 0, 1));

pub const fn unspecified() -> Ipv4Addr

Creates a new IPv4 address representing an unspecified address: 0.0.0.0

Examples

use no_std_net::Ipv4Addr;

let addr = Ipv4Addr::unspecified();
assert_eq!(addr, Ipv4Addr::new(0, 0, 0, 0));

pub const fn octets(&self) -> [u8; 4]

Returns the four eight-bit integers that make up this address.

Examples

use no_std_net::Ipv4Addr;

let addr = Ipv4Addr::new(127, 0, 0, 1);
assert_eq!(addr.octets(), [127, 0, 0, 1]);

pub const fn is_unspecified(&self) -> bool

Returns true for the special 'unspecified' address (0.0.0.0).

This property is defined in UNIX Network Programming, Second Edition, W. Richard Stevens, p. 891; see also ip7.

Examples

use no_std_net::Ipv4Addr;

assert_eq!(Ipv4Addr::new(0, 0, 0, 0).is_unspecified(), true);
assert_eq!(Ipv4Addr::new(45, 22, 13, 197).is_unspecified(), false);

pub const fn is_loopback(&self) -> bool

Returns true if this is a loopback address (127.0.0.0/8).

This property is defined by IETF RFC 1122.

Examples

use no_std_net::Ipv4Addr;

assert_eq!(Ipv4Addr::new(127, 0, 0, 1).is_loopback(), true);
assert_eq!(Ipv4Addr::new(45, 22, 13, 197).is_loopback(), false);

pub const fn is_private(&self) -> bool

Returns true if this is a private address.

The private address ranges are defined in IETF RFC 1918 and include:

• 10.0.0.0/8
• 172.16.0.0/12
• 192.168.0.0/16

Examples

use no_std_net::Ipv4Addr;

assert_eq!(Ipv4Addr::new(10, 0, 0, 1).is_private(), true);
assert_eq!(Ipv4Addr::new(10, 10, 10, 10).is_private(), true);
assert_eq!(Ipv4Addr::new(172, 16, 10, 10).is_private(), true);
assert_eq!(Ipv4Addr::new(172, 29, 45, 14).is_private(), true);
assert_eq!(Ipv4Addr::new(172, 32, 0, 2).is_private(), false);
assert_eq!(Ipv4Addr::new(192, 168, 0, 2).is_private(), true);
assert_eq!(Ipv4Addr::new(192, 169, 0, 2).is_private(), false);

pub const fn is_link_local(&self) -> bool

Returns true if the address is link-local (169.254.0.0/16).

This property is defined by IETF RFC 3927.

Examples

use no_std_net::Ipv4Addr;

assert_eq!(Ipv4Addr::new(169, 254, 0, 0).is_link_local(), true);
assert_eq!(Ipv4Addr::new(169, 254, 10, 65).is_link_local(), true);
assert_eq!(Ipv4Addr::new(16, 89, 10, 65).is_link_local(), false);

pub const fn is_global(&self) -> bool

Returns true if the address appears to be globally routable. See iana-ipv4-special-registry.

The following return false:

• private address (10.0.0.0/8, 172.16.0.0/12 and 192.168.0.0/16)
• the loopback address (127.0.0.0/8)
• the link-local address (169.254.0.0/16)
• the broadcast address (255.255.255.255/32)
• test addresses used for documentation (192.0.2.0/24, 198.51.100.0/24 and 203.0.113.0/24)
• the unspecified address (0.0.0.0)

Examples

use no_std_net::Ipv4Addr;

fn main() {
    assert_eq!(Ipv4Addr::new(10, 254, 0, 0).is_global(), false);
    assert_eq!(Ipv4Addr::new(192, 168, 10, 65).is_global(), false);
    assert_eq!(Ipv4Addr::new(172, 16, 10, 65).is_global(), false);
    assert_eq!(Ipv4Addr::new(0, 0, 0, 0).is_global(), false);
    assert_eq!(Ipv4Addr::new(80, 9, 12, 3).is_global(), true);
}

pub const fn is_multicast(&self) -> bool

Returns true if this is a multicast address (224.0.0.0/4).

Multicast addresses have a most significant octet between 224 and 239, and is defined by IETF RFC 5771.

Examples

use no_std_net::Ipv4Addr;

assert_eq!(Ipv4Addr::new(224, 254, 0, 0).is_multicast(), true);
assert_eq!(Ipv4Addr::new(236, 168, 10, 65).is_multicast(), true);
assert_eq!(Ipv4Addr::new(172, 16, 10, 65).is_multicast(), false);

pub const fn is_broadcast(&self) -> bool

Returns true if this is a broadcast address (255.255.255.255).

A broadcast address has all octets set to 255 as defined in IETF RFC 919.

Examples

use no_std_net::Ipv4Addr;

assert_eq!(Ipv4Addr::new(255, 255, 255, 255).is_broadcast(), true);
assert_eq!(Ipv4Addr::new(236, 168, 10, 65).is_broadcast(), false);

pub const fn is_documentation(&self) -> bool

Returns true if this address is in a range designated for documentation.

This is defined in IETF RFC 5737:

• 192.0.2.0/24 (TEST-NET-1)
• 198.51.100.0/24 (TEST-NET-2)
• 203.0.113.0/24 (TEST-NET-3)

Examples

use no_std_net::Ipv4Addr;

assert_eq!(Ipv4Addr::new(192, 0, 2, 255).is_documentation(), true);
assert_eq!(Ipv4Addr::new(198, 51, 100, 65).is_documentation(), true);
assert_eq!(Ipv4Addr::new(203, 0, 113, 6).is_documentation(), true);
assert_eq!(Ipv4Addr::new(193, 34, 17, 19).is_documentation(), false);

pub const fn to_ipv6_compatible(&self) -> Ipv6Addr

Converts this address to an IPv4-compatible IPv6 address.

a.b.c.d becomes ::a.b.c.d

Examples

use no_std_net::{Ipv4Addr, Ipv6Addr};

assert_eq!(Ipv4Addr::new(192, 0, 2, 255).to_ipv6_compatible(),
           Ipv6Addr::new(0, 0, 0, 0, 0, 0, 49152, 767));

pub const fn to_ipv6_mapped(&self) -> Ipv6Addr

Converts this address to an IPv4-mapped IPv6 address.

a.b.c.d becomes ::ffff:a.b.c.d

Examples

use no_std_net::{Ipv4Addr, Ipv6Addr};

assert_eq!(Ipv4Addr::new(192, 0, 2, 255).to_ipv6_mapped(),
           Ipv6Addr::new(0, 0, 0, 0, 0, 65535, 49152, 767));

Trait Implementations

impl Clone for Ipv4Addr

pub fn clone(&self) -> Ipv4Addr

Returns a copy of the value.

pub fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Copy for Ipv4Addr

impl Debug for Ipv4Addr

pub fn fmt(&self, fmt: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Display for Ipv4Addr

pub fn fmt(&self, fmt: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Eq for Ipv4Addr

impl From<[u8; 4]> for Ipv4Addr

pub fn from(octets: [u8; 4]) -> Ipv4Addr

Creates an Ipv4Addr from a four element byte array.

Examples

use no_std_net::Ipv4Addr;

let addr = Ipv4Addr::from([13u8, 12u8, 11u8, 10u8]);
assert_eq!(Ipv4Addr::new(13, 12, 11, 10), addr);

impl From<Ipv4Addr> for IpAddr

pub fn from(ipv4: Ipv4Addr) -> IpAddr

Copies this address to a new IpAddr::V4.

Examples

use no_std_net::{IpAddr, Ipv4Addr};

let addr = Ipv4Addr::new(127, 0, 0, 1);

assert_eq!(
    IpAddr::V4(addr),
    IpAddr::from(addr)
)

impl From<Ipv4Addr> for u32

pub fn from(ip: Ipv4Addr) -> u32

Performs the conversion.

impl From<u32> for Ipv4Addr

pub fn from(ip: u32) -> Ipv4Addr

Performs the conversion.

impl FromStr for Ipv4Addr

type Err = AddrParseError

The associated error which can be returned from parsing.

pub fn from_str(s: &str) -> Result<Ipv4Addr, AddrParseError>

Parses a string s to return a value of this type.

impl Hash for Ipv4Addr

pub fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

pub fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given Hasher.

impl Ord for Ipv4Addr

pub fn cmp(&self, other: &Ipv4Addr) -> Ordering

This method returns an Ordering between self and other.

#[must_use]pub fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]pub fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]pub fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl PartialEq<IpAddr> for Ipv4Addr

pub fn eq(&self, other: &IpAddr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]pub fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl PartialEq<Ipv4Addr> for Ipv4Addr

pub fn eq(&self, other: &Ipv4Addr) -> bool

This method tests for self and other values to be equal, and is used by ==.

pub fn ne(&self, other: &Ipv4Addr) -> bool

This method tests for !=.

impl PartialEq<Ipv4Addr> for IpAddr

pub fn eq(&self, other: &Ipv4Addr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]pub fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl PartialOrd<IpAddr> for Ipv4Addr

pub fn partial_cmp(&self, other: &IpAddr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]pub fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]pub fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]pub fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]pub fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<Ipv4Addr> for Ipv4Addr

pub fn partial_cmp(&self, other: &Ipv4Addr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

pub fn lt(&self, other: &Ipv4Addr) -> bool

This method tests less than (for self and other) and is used by the < operator.

pub fn le(&self, other: &Ipv4Addr) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

pub fn gt(&self, other: &Ipv4Addr) -> bool

This method tests greater than (for self and other) and is used by the > operator.

pub fn ge(&self, other: &Ipv4Addr) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<Ipv4Addr> for IpAddr

pub fn partial_cmp(&self, other: &Ipv4Addr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]pub fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]pub fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]pub fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]pub fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl StructuralEq for Ipv4Addr

impl StructuralPartialEq for Ipv4Addr