Struct noodles_gff::record::attributes::Attributes

pub struct Attributes(/* private fields */);

GFF record attributes.

Attributes are extra data attached to a GFF record. They are represented as a typed map, where each key (Tag) is associated with a typed Value.

Methods from Deref<Target = IndexMap<Tag, Value>>

pub fn capacity(&self) -> usize

Return the number of elements the map can hold without reallocating.

This number is a lower bound; the map might be able to hold more, but is guaranteed to be able to hold at least this many.

Computes in O(1) time.

pub fn hasher(&self) -> &S

Return a reference to the map’s BuildHasher.

pub fn len(&self) -> usize

Return the number of key-value pairs in the map.

Computes in O(1) time.

pub fn is_empty(&self) -> bool

Returns true if the map contains no elements.

Computes in O(1) time.

pub fn iter(&self) -> Iter<'_, K, V>

Return an iterator over the key-value pairs of the map, in their order

pub fn iter_mut(&mut self) -> IterMut<'_, K, V>

Return an iterator over the key-value pairs of the map, in their order

pub fn keys(&self) -> Keys<'_, K, V>

Return an iterator over the keys of the map, in their order

pub fn values(&self) -> Values<'_, K, V>

Return an iterator over the values of the map, in their order

pub fn values_mut(&mut self) -> ValuesMut<'_, K, V>

Return an iterator over mutable references to the values of the map, in their order

pub fn clear(&mut self)

Remove all key-value pairs in the map, while preserving its capacity.

Computes in O(n) time.

pub fn truncate(&mut self, len: usize)

Shortens the map, keeping the first len elements and dropping the rest.

If len is greater than the map’s current length, this has no effect.

pub fn drain<R>(&mut self, range: R) -> Drain<'_, K, V>

where R: RangeBounds<usize>,

Clears the IndexMap in the given index range, returning those key-value pairs as a drain iterator.

The range may be any type that implements RangeBounds<usize>, including all of the std::ops::Range* types, or even a tuple pair of Bound start and end values. To drain the map entirely, use RangeFull like map.drain(..).

This shifts down all entries following the drained range to fill the gap, and keeps the allocated memory for reuse.

Panics if the starting point is greater than the end point or if the end point is greater than the length of the map.

pub fn split_off(&mut self, at: usize) -> IndexMap<K, V, S>

where S: Clone,

Splits the collection into two at the given index.

Returns a newly allocated map containing the elements in the range [at, len). After the call, the original map will be left containing the elements [0, at) with its previous capacity unchanged.

Panics if at > len.

pub fn reserve(&mut self, additional: usize)

Reserve capacity for additional more key-value pairs.

Computes in O(n) time.

pub fn reserve_exact(&mut self, additional: usize)

Reserve capacity for additional more key-value pairs, without over-allocating.

Unlike reserve, this does not deliberately over-allocate the entry capacity to avoid frequent re-allocations. However, the underlying data structures may still have internal capacity requirements, and the allocator itself may give more space than requested, so this cannot be relied upon to be precisely minimal.

Computes in O(n) time.

pub fn try_reserve(&mut self, additional: usize) -> Result<(), TryReserveError>

Try to reserve capacity for additional more key-value pairs.

Computes in O(n) time.

pub fn try_reserve_exact( &mut self, additional: usize ) -> Result<(), TryReserveError>

Try to reserve capacity for additional more key-value pairs, without over-allocating.

Unlike try_reserve, this does not deliberately over-allocate the entry capacity to avoid frequent re-allocations. However, the underlying data structures may still have internal capacity requirements, and the allocator itself may give more space than requested, so this cannot be relied upon to be precisely minimal.

Computes in O(n) time.

pub fn shrink_to_fit(&mut self)

Shrink the capacity of the map as much as possible.

Computes in O(n) time.

pub fn shrink_to(&mut self, min_capacity: usize)

Shrink the capacity of the map with a lower limit.

Computes in O(n) time.

pub fn insert(&mut self, key: K, value: V) -> Option<V>

Insert a key-value pair in the map.

If an equivalent key already exists in the map: the key remains and retains in its place in the order, its corresponding value is updated with value, and the older value is returned inside Some(_).

If no equivalent key existed in the map: the new key-value pair is inserted, last in order, and None is returned.

Computes in O(1) time (amortized average).

See also entry if you want to insert or modify, or insert_full if you need to get the index of the corresponding key-value pair.

pub fn insert_full(&mut self, key: K, value: V) -> (usize, Option<V>)

Insert a key-value pair in the map, and get their index.

If an equivalent key already exists in the map: the key remains and retains in its place in the order, its corresponding value is updated with value, and the older value is returned inside (index, Some(_)).

If no equivalent key existed in the map: the new key-value pair is inserted, last in order, and (index, None) is returned.

Computes in O(1) time (amortized average).

See also entry if you want to insert or modify.

pub fn insert_sorted(&mut self, key: K, value: V) -> (usize, Option<V>)

where K: Ord,

Insert a key-value pair in the map at its ordered position among sorted keys.

This is equivalent to finding the position with binary_search_keys, then either updating it or calling shift_insert for a new key.

If the sorted key is found in the map, its corresponding value is updated with value, and the older value is returned inside (index, Some(_)). Otherwise, the new key-value pair is inserted at the sorted position, and (index, None) is returned.

If the existing keys are not already sorted, then the insertion index is unspecified (like slice::binary_search), but the key-value pair is moved to or inserted at that position regardless.

Computes in O(n) time (average). Instead of repeating calls to insert_sorted, it may be faster to call batched insert or extend and only call sort_keys or sort_unstable_keys once.

pub fn shift_insert(&mut self, index: usize, key: K, value: V) -> Option<V>

Insert a key-value pair in the map at the given index.

If an equivalent key already exists in the map: the key remains and is moved to the new position in the map, its corresponding value is updated with value, and the older value is returned inside Some(_).

If no equivalent key existed in the map: the new key-value pair is inserted at the given index, and None is returned.

Panics if index is out of bounds.

Computes in O(n) time (average).

See also entry if you want to insert or modify, perhaps only using the index for new entries with VacantEntry::shift_insert.

pub fn entry(&mut self, key: K) -> Entry<'_, K, V>

Get the given key’s corresponding entry in the map for insertion and/or in-place manipulation.

Computes in O(1) time (amortized average).

pub fn splice<R, I>( &mut self, range: R, replace_with: I ) -> Splice<'_, <I as IntoIterator>::IntoIter, K, V, S>

where R: RangeBounds<usize>, I: IntoIterator<Item = (K, V)>,

Creates a splicing iterator that replaces the specified range in the map with the given replace_with key-value iterator and yields the removed items. replace_with does not need to be the same length as range.

The range is removed even if the iterator is not consumed until the end. It is unspecified how many elements are removed from the map if the Splice value is leaked.

The input iterator replace_with is only consumed when the Splice value is dropped. If a key from the iterator matches an existing entry in the map (outside of range), then the value will be updated in that position. Otherwise, the new key-value pair will be inserted in the replaced range.

Panics if the starting point is greater than the end point or if the end point is greater than the length of the map.

Examples

use indexmap::IndexMap;

let mut map = IndexMap::from([(0, '_'), (1, 'a'), (2, 'b'), (3, 'c'), (4, 'd')]);
let new = [(5, 'E'), (4, 'D'), (3, 'C'), (2, 'B'), (1, 'A')];
let removed: Vec<_> = map.splice(2..4, new).collect();

// 1 and 4 got new values, while 5, 3, and 2 were newly inserted.
assert!(map.into_iter().eq([(0, '_'), (1, 'A'), (5, 'E'), (3, 'C'), (2, 'B'), (4, 'D')]));
assert_eq!(removed, &[(2, 'b'), (3, 'c')]);

pub fn contains_key<Q>(&self, key: &Q) -> bool

where Q: Hash + Equivalent<K> + ?Sized,

Return true if an equivalent to key exists in the map.

Computes in O(1) time (average).

pub fn get<Q>(&self, key: &Q) -> Option<&V>

where Q: Hash + Equivalent<K> + ?Sized,

Return a reference to the value stored for key, if it is present, else None.

Computes in O(1) time (average).

pub fn get_key_value<Q>(&self, key: &Q) -> Option<(&K, &V)>

where Q: Hash + Equivalent<K> + ?Sized,

Return references to the key-value pair stored for key, if it is present, else None.

Computes in O(1) time (average).

pub fn get_full<Q>(&self, key: &Q) -> Option<(usize, &K, &V)>

where Q: Hash + Equivalent<K> + ?Sized,

Return item index, key and value

pub fn get_index_of<Q>(&self, key: &Q) -> Option<usize>

where Q: Hash + Equivalent<K> + ?Sized,

Return item index, if it exists in the map

Computes in O(1) time (average).

pub fn get_mut<Q>(&mut self, key: &Q) -> Option<&mut V>

where Q: Hash + Equivalent<K> + ?Sized,

pub fn get_full_mut<Q>(&mut self, key: &Q) -> Option<(usize, &K, &mut V)>

where Q: Hash + Equivalent<K> + ?Sized,

pub fn remove<Q>(&mut self, key: &Q) -> Option<V>

where Q: Hash + Equivalent<K> + ?Sized,

👎Deprecated: remove disrupts the map order – use swap_remove or shift_remove for explicit behavior.

Remove the key-value pair equivalent to key and return its value.

NOTE: This is equivalent to .swap_remove(key), replacing this entry’s position with the last element, and it is deprecated in favor of calling that explicitly. If you need to preserve the relative order of the keys in the map, use .shift_remove(key) instead.

pub fn remove_entry<Q>(&mut self, key: &Q) -> Option<(K, V)>

where Q: Hash + Equivalent<K> + ?Sized,

👎Deprecated: remove_entry disrupts the map order – use swap_remove_entry or shift_remove_entry for explicit behavior.

Remove and return the key-value pair equivalent to key.

NOTE: This is equivalent to .swap_remove_entry(key), replacing this entry’s position with the last element, and it is deprecated in favor of calling that explicitly. If you need to preserve the relative order of the keys in the map, use .shift_remove_entry(key) instead.

pub fn swap_remove<Q>(&mut self, key: &Q) -> Option<V>

where Q: Hash + Equivalent<K> + ?Sized,

Remove the key-value pair equivalent to key and return its value.

Like Vec::swap_remove, the pair is removed by swapping it with the last element of the map and popping it off. This perturbs the position of what used to be the last element!

Return None if key is not in map.

Computes in O(1) time (average).

pub fn swap_remove_entry<Q>(&mut self, key: &Q) -> Option<(K, V)>

where Q: Hash + Equivalent<K> + ?Sized,

Remove and return the key-value pair equivalent to key.

Like Vec::swap_remove, the pair is removed by swapping it with the last element of the map and popping it off. This perturbs the position of what used to be the last element!

Return None if key is not in map.

Computes in O(1) time (average).

pub fn swap_remove_full<Q>(&mut self, key: &Q) -> Option<(usize, K, V)>

where Q: Hash + Equivalent<K> + ?Sized,

Remove the key-value pair equivalent to key and return it and the index it had.

Like Vec::swap_remove, the pair is removed by swapping it with the last element of the map and popping it off. This perturbs the position of what used to be the last element!

Return None if key is not in map.

Computes in O(1) time (average).

pub fn shift_remove<Q>(&mut self, key: &Q) -> Option<V>

where Q: Hash + Equivalent<K> + ?Sized,

Remove the key-value pair equivalent to key and return its value.

Like Vec::remove, the pair is removed by shifting all of the elements that follow it, preserving their relative order. This perturbs the index of all of those elements!

Return None if key is not in map.

Computes in O(n) time (average).

pub fn shift_remove_entry<Q>(&mut self, key: &Q) -> Option<(K, V)>

where Q: Hash + Equivalent<K> + ?Sized,

Remove and return the key-value pair equivalent to key.

Like Vec::remove, the pair is removed by shifting all of the elements that follow it, preserving their relative order. This perturbs the index of all of those elements!

Return None if key is not in map.

Computes in O(n) time (average).

pub fn shift_remove_full<Q>(&mut self, key: &Q) -> Option<(usize, K, V)>

where Q: Hash + Equivalent<K> + ?Sized,

Remove the key-value pair equivalent to key and return it and the index it had.

Like Vec::remove, the pair is removed by shifting all of the elements that follow it, preserving their relative order. This perturbs the index of all of those elements!

Return None if key is not in map.

Computes in O(n) time (average).

pub fn pop(&mut self) -> Option<(K, V)>

Remove the last key-value pair

This preserves the order of the remaining elements.

Computes in O(1) time (average).

pub fn retain<F>(&mut self, keep: F)

where F: FnMut(&K, &mut V) -> bool,

Scan through each key-value pair in the map and keep those where the closure keep returns true.

The elements are visited in order, and remaining elements keep their order.

Computes in O(n) time (average).

pub fn sort_keys(&mut self)

where K: Ord,

Sort the map’s key-value pairs by the default ordering of the keys.

This is a stable sort – but equivalent keys should not normally coexist in a map at all, so sort_unstable_keys is preferred because it is generally faster and doesn’t allocate auxiliary memory.

See sort_by for details.

pub fn sort_by<F>(&mut self, cmp: F)

where F: FnMut(&K, &V, &K, &V) -> Ordering,

Sort the map’s key-value pairs in place using the comparison function cmp.

The comparison function receives two key and value pairs to compare (you can sort by keys or values or their combination as needed).

Computes in O(n log n + c) time and O(n) space where n is the length of the map and c the capacity. The sort is stable.

pub fn sort_unstable_keys(&mut self)

where K: Ord,

Sort the map’s key-value pairs by the default ordering of the keys, but may not preserve the order of equal elements.

See sort_unstable_by for details.

pub fn sort_unstable_by<F>(&mut self, cmp: F)

where F: FnMut(&K, &V, &K, &V) -> Ordering,

Sort the map’s key-value pairs in place using the comparison function cmp, but may not preserve the order of equal elements.

The comparison function receives two key and value pairs to compare (you can sort by keys or values or their combination as needed).

Computes in O(n log n + c) time where n is the length of the map and c is the capacity. The sort is unstable.

pub fn sort_by_cached_key<T, F>(&mut self, sort_key: F)

where T: Ord, F: FnMut(&K, &V) -> T,

Sort the map’s key-value pairs in place using a sort-key extraction function.

During sorting, the function is called at most once per entry, by using temporary storage to remember the results of its evaluation. The order of calls to the function is unspecified and may change between versions of indexmap or the standard library.

Computes in O(m n + n log n + c) time () and O(n) space, where the function is O(m), n is the length of the map, and c the capacity. The sort is stable.

pub fn binary_search_keys(&self, x: &K) -> Result<usize, usize>

where K: Ord,

Search over a sorted map for a key.

Returns the position where that key is present, or the position where it can be inserted to maintain the sort. See slice::binary_search for more details.

Computes in O(log(n)) time, which is notably less scalable than looking the key up using get_index_of, but this can also position missing keys.

pub fn binary_search_by<'a, F>(&'a self, f: F) -> Result<usize, usize>

where F: FnMut(&'a K, &'a V) -> Ordering,

Search over a sorted map with a comparator function.

Returns the position where that value is present, or the position where it can be inserted to maintain the sort. See slice::binary_search_by for more details.

Computes in O(log(n)) time.

pub fn binary_search_by_key<'a, B, F>( &'a self, b: &B, f: F ) -> Result<usize, usize>

where F: FnMut(&'a K, &'a V) -> B, B: Ord,

Search over a sorted map with an extraction function.

Returns the position where that value is present, or the position where it can be inserted to maintain the sort. See slice::binary_search_by_key for more details.

Computes in O(log(n)) time.

pub fn partition_point<P>(&self, pred: P) -> usize

where P: FnMut(&K, &V) -> bool,

Returns the index of the partition point of a sorted map according to the given predicate (the index of the first element of the second partition).

See slice::partition_point for more details.

Computes in O(log(n)) time.

pub fn reverse(&mut self)

Reverses the order of the map’s key-value pairs in place.

Computes in O(n) time and O(1) space.

pub fn as_slice(&self) -> &Slice<K, V>

Returns a slice of all the key-value pairs in the map.

Computes in O(1) time.

pub fn as_mut_slice(&mut self) -> &mut Slice<K, V>

Returns a mutable slice of all the key-value pairs in the map.

Computes in O(1) time.

pub fn get_index(&self, index: usize) -> Option<(&K, &V)>

Get a key-value pair by index

Valid indices are 0 <= index < self.len()

Computes in O(1) time.

pub fn get_index_mut(&mut self, index: usize) -> Option<(&K, &mut V)>

Get a key-value pair by index

Valid indices are 0 <= index < self.len()

Computes in O(1) time.

pub fn get_index_entry( &mut self, index: usize ) -> Option<IndexedEntry<'_, K, V>>

Get an entry in the map by index for in-place manipulation.

Valid indices are 0 <= index < self.len()

Computes in O(1) time.

pub fn get_range<R>(&self, range: R) -> Option<&Slice<K, V>>

where R: RangeBounds<usize>,

Returns a slice of key-value pairs in the given range of indices.

Valid indices are 0 <= index < self.len()

Computes in O(1) time.

pub fn get_range_mut<R>(&mut self, range: R) -> Option<&mut Slice<K, V>>

where R: RangeBounds<usize>,

Returns a mutable slice of key-value pairs in the given range of indices.

Valid indices are 0 <= index < self.len()

Computes in O(1) time.

pub fn first(&self) -> Option<(&K, &V)>

Get the first key-value pair

Computes in O(1) time.

pub fn first_mut(&mut self) -> Option<(&K, &mut V)>

Get the first key-value pair, with mutable access to the value

Computes in O(1) time.

pub fn last(&self) -> Option<(&K, &V)>

Get the last key-value pair

Computes in O(1) time.

pub fn last_mut(&mut self) -> Option<(&K, &mut V)>

Get the last key-value pair, with mutable access to the value

Computes in O(1) time.

pub fn swap_remove_index(&mut self, index: usize) -> Option<(K, V)>

Remove the key-value pair by index

Valid indices are 0 <= index < self.len()

Like Vec::swap_remove, the pair is removed by swapping it with the last element of the map and popping it off. This perturbs the position of what used to be the last element!

Computes in O(1) time (average).

pub fn shift_remove_index(&mut self, index: usize) -> Option<(K, V)>

Remove the key-value pair by index

Valid indices are 0 <= index < self.len()

Like Vec::remove, the pair is removed by shifting all of the elements that follow it, preserving their relative order. This perturbs the index of all of those elements!

Computes in O(n) time (average).

pub fn move_index(&mut self, from: usize, to: usize)

Moves the position of a key-value pair from one index to another by shifting all other pairs in-between.

• If from < to, the other pairs will shift down while the targeted pair moves up.
• If from > to, the other pairs will shift up while the targeted pair moves down.

Panics if from or to are out of bounds.

Computes in O(n) time (average).

pub fn swap_indices(&mut self, a: usize, b: usize)

Swaps the position of two key-value pairs in the map.

Panics if a or b are out of bounds.

Computes in O(1) time (average).

Trait Implementations

impl Clone for Attributes

fn clone(&self) -> Attributes

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Attributes

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for Attributes

fn default() -> Attributes

Returns the “default value” for a type.

impl Deref for Attributes

type Target = IndexMap<String, Value>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl DerefMut for Attributes

fn deref_mut(&mut self) -> &mut Self::Target

Mutably dereferences the value.

impl Display for Attributes

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Extend<(String, Value)> for Attributes

fn extend<T: IntoIterator<Item = (Tag, Value)>>(&mut self, iter: T)

Extends a collection with the contents of an iterator.

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl FromIterator<(String, Value)> for Attributes

fn from_iter<T: IntoIterator<Item = (Tag, Value)>>(iter: T) -> Self

Creates a value from an iterator.

impl FromStr for Attributes

type Err = ParseError

The associated error which can be returned from parsing.

fn from_str(s: &str) -> Result<Self, Self::Err>

Parses a string s to return a value of this type.

impl PartialEq for Attributes

fn eq(&self, other: &Attributes) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Eq for Attributes

impl StructuralPartialEq for Attributes