Enum opentelemetry_proto::tonic::metrics::v1::AggregationTemporality

#[repr(i32)]
pub enum AggregationTemporality {
    Unspecified = 0,
    Delta = 1,
    Cumulative = 2,
}

Available on crate features gen-tonic-messages and metrics only.

AggregationTemporality defines how a metric aggregator reports aggregated values. It describes how those values relate to the time interval over which they are aggregated.

Variants

Unspecified = 0

UNSPECIFIED is the default AggregationTemporality, it MUST not be used.

Delta = 1

DELTA is an AggregationTemporality for a metric aggregator which reports changes since last report time. Successive metrics contain aggregation of values from continuous and non-overlapping intervals.

The values for a DELTA metric are based only on the time interval associated with one measurement cycle. There is no dependency on previous measurements like is the case for CUMULATIVE metrics.

For example, consider a system measuring the number of requests that it receives and reports the sum of these requests every second as a DELTA metric:

1. The system starts receiving at time=t_0.
2. A request is received, the system measures 1 request.
3. A request is received, the system measures 1 request.
4. A request is received, the system measures 1 request.
5. The 1 second collection cycle ends. A metric is exported for the number of requests received over the interval of time t_0 to t_0+1 with a value of 3.
6. A request is received, the system measures 1 request.
7. A request is received, the system measures 1 request.
8. The 1 second collection cycle ends. A metric is exported for the number of requests received over the interval of time t_0+1 to t_0+2 with a value of 2.

Cumulative = 2

CUMULATIVE is an AggregationTemporality for a metric aggregator which reports changes since a fixed start time. This means that current values of a CUMULATIVE metric depend on all previous measurements since the start time. Because of this, the sender is required to retain this state in some form. If this state is lost or invalidated, the CUMULATIVE metric values MUST be reset and a new fixed start time following the last reported measurement time sent MUST be used.

For example, consider a system measuring the number of requests that it receives and reports the sum of these requests every second as a CUMULATIVE metric:

1. The system starts receiving at time=t_0.
2. A request is received, the system measures 1 request.
3. A request is received, the system measures 1 request.
4. A request is received, the system measures 1 request.
5. The 1 second collection cycle ends. A metric is exported for the number of requests received over the interval of time t_0 to t_0+1 with a value of 3.
6. A request is received, the system measures 1 request.
7. A request is received, the system measures 1 request.
8. The 1 second collection cycle ends. A metric is exported for the number of requests received over the interval of time t_0 to t_0+2 with a value of 5.
9. The system experiences a fault and loses state.
10. The system recovers and resumes receiving at time=t_1.
11. A request is received, the system measures 1 request.
12. The 1 second collection cycle ends. A metric is exported for the number of requests received over the interval of time t_1 to t_0+1 with a value of 1.

Note: Even though, when reporting changes since last report time, using CUMULATIVE is valid, it is not recommended. This may cause problems for systems that do not use start_time to determine when the aggregation value was reset (e.g. Prometheus).

Implementations

impl AggregationTemporality

pub fn is_valid(value: i32) -> bool

Returns true if value is a variant of AggregationTemporality.

pub fn from_i32(value: i32) -> Option<AggregationTemporality>

👎Deprecated: Use the TryFrom<i32> implementation instead

Converts an i32 to a AggregationTemporality, or None if value is not a valid variant.

impl AggregationTemporality

pub fn as_str_name(&self) -> &'static str

String value of the enum field names used in the ProtoBuf definition.

The values are not transformed in any way and thus are considered stable (if the ProtoBuf definition does not change) and safe for programmatic use.

pub fn from_str_name(value: &str) -> Option<Self>

Creates an enum from field names used in the ProtoBuf definition.

Trait Implementations

impl Clone for AggregationTemporality

fn clone(&self) -> AggregationTemporality

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for AggregationTemporality

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for AggregationTemporality

fn default() -> AggregationTemporality

Returns the “default value” for a type.

impl<'de> Deserialize<'de> for AggregationTemporality

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl From<AggregationTemporality> for i32

fn from(value: AggregationTemporality) -> i32

Converts to this type from the input type.

impl From<Temporality> for AggregationTemporality

fn from(temporality: Temporality) -> Self

Converts to this type from the input type.

impl Hash for AggregationTemporality

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl Ord for AggregationTemporality

fn cmp(&self, other: &AggregationTemporality) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized + PartialOrd,

Restrict a value to a certain interval.

impl PartialEq for AggregationTemporality

fn eq(&self, other: &AggregationTemporality) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for AggregationTemporality

fn partial_cmp(&self, other: &AggregationTemporality) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl Serialize for AggregationTemporality

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.

impl TryFrom<i32> for AggregationTemporality

type Error = UnknownEnumValue

The type returned in the event of a conversion error.

fn try_from(value: i32) -> Result<AggregationTemporality, UnknownEnumValue>

Performs the conversion.

impl Copy for AggregationTemporality

impl Eq for AggregationTemporality

impl StructuralPartialEq for AggregationTemporality