[−][src]Struct raw_cpuid::FeatureInfo

pub struct FeatureInfo { /* fields omitted */ }

Implementations

`impl FeatureInfo`[src]

`pub fn extended_family_id(&self) -> u8`[src]

Version Information: Extended Family

`pub fn extended_model_id(&self) -> u8`[src]

Version Information: Extended Model

`pub fn family_id(&self) -> u8`[src]

Version Information: Family

`pub fn model_id(&self) -> u8`[src]

Version Information: Model

`pub fn stepping_id(&self) -> u8`[src]

Version Information: Stepping ID

`pub fn brand_index(&self) -> u8`[src]

Brand Index

`pub fn cflush_cache_line_size(&self) -> u8`[src]

CLFLUSH line size (Value ∗ 8 = cache line size in bytes)

`pub fn initial_local_apic_id(&self) -> u8`[src]

Initial APIC ID

`pub fn max_logical_processor_ids(&self) -> u8`[src]

Maximum number of addressable IDs for logical processors in this physical package.

`pub fn has_sse3(&self) -> bool`[src]

Streaming SIMD Extensions 3 (SSE3). A value of 1 indicates the processor supports this technology.

`pub fn has_pclmulqdq(&self) -> bool`[src]

PCLMULQDQ. A value of 1 indicates the processor supports the PCLMULQDQ instruction

`pub fn has_ds_area(&self) -> bool`[src]

64-bit DS Area. A value of 1 indicates the processor supports DS area using 64-bit layout

`pub fn has_monitor_mwait(&self) -> bool`[src]

MONITOR/MWAIT. A value of 1 indicates the processor supports this feature.

`pub fn has_cpl(&self) -> bool`[src]

CPL Qualified Debug Store. A value of 1 indicates the processor supports the extensions to the Debug Store feature to allow for branch message storage qualified by CPL.

`pub fn has_vmx(&self) -> bool`[src]

Virtual Machine Extensions. A value of 1 indicates that the processor supports this technology.

`pub fn has_smx(&self) -> bool`[src]

Safer Mode Extensions. A value of 1 indicates that the processor supports this technology. See Chapter 5, Safer Mode Extensions Reference.

`pub fn has_eist(&self) -> bool`[src]

Enhanced Intel SpeedStep® technology. A value of 1 indicates that the processor supports this technology.

`pub fn has_tm2(&self) -> bool`[src]

Thermal Monitor 2. A value of 1 indicates whether the processor supports this technology.

`pub fn has_ssse3(&self) -> bool`[src]

A value of 1 indicates the presence of the Supplemental Streaming SIMD Extensions 3 (SSSE3). A value of 0 indicates the instruction extensions are not present in the processor

`pub fn has_cnxtid(&self) -> bool`[src]

L1 Context ID. A value of 1 indicates the L1 data cache mode can be set to either adaptive mode or shared mode. A value of 0 indicates this feature is not supported. See definition of the IA32_MISC_ENABLE MSR Bit 24 (L1 Data Cache Context Mode) for details.

`pub fn has_fma(&self) -> bool`[src]

A value of 1 indicates the processor supports FMA extensions using YMM state.

`pub fn has_cmpxchg16b(&self) -> bool`[src]

CMPXCHG16B Available. A value of 1 indicates that the feature is available. See the CMPXCHG8B/CMPXCHG16B Compare and Exchange Bytes section. 14

`pub fn has_pdcm(&self) -> bool`[src]

Perfmon and Debug Capability: A value of 1 indicates the processor supports the performance and debug feature indication MSR IA32_PERF_CAPABILITIES.

`pub fn has_pcid(&self) -> bool`[src]

Process-context identifiers. A value of 1 indicates that the processor supports PCIDs and the software may set CR4.PCIDE to 1.

`pub fn has_dca(&self) -> bool`[src]

A value of 1 indicates the processor supports the ability to prefetch data from a memory mapped device.

`pub fn has_sse41(&self) -> bool`[src]

A value of 1 indicates that the processor supports SSE4.1.

`pub fn has_sse42(&self) -> bool`[src]

A value of 1 indicates that the processor supports SSE4.2.

`pub fn has_x2apic(&self) -> bool`[src]

A value of 1 indicates that the processor supports x2APIC feature.

`pub fn has_movbe(&self) -> bool`[src]

A value of 1 indicates that the processor supports MOVBE instruction.

`pub fn has_popcnt(&self) -> bool`[src]

A value of 1 indicates that the processor supports the POPCNT instruction.

`pub fn has_tsc_deadline(&self) -> bool`[src]

A value of 1 indicates that the processors local APIC timer supports one-shot operation using a TSC deadline value.

`pub fn has_aesni(&self) -> bool`[src]

A value of 1 indicates that the processor supports the AESNI instruction extensions.

`pub fn has_xsave(&self) -> bool`[src]

A value of 1 indicates that the processor supports the XSAVE/XRSTOR processor extended states feature, the XSETBV/XGETBV instructions, and XCR0.

`pub fn has_oxsave(&self) -> bool`[src]

A value of 1 indicates that the OS has enabled XSETBV/XGETBV instructions to access XCR0, and support for processor extended state management using XSAVE/XRSTOR.

`pub fn has_avx(&self) -> bool`[src]

A value of 1 indicates the processor supports the AVX instruction extensions.

`pub fn has_f16c(&self) -> bool`[src]

A value of 1 indicates that processor supports 16-bit floating-point conversion instructions.

`pub fn has_rdrand(&self) -> bool`[src]

A value of 1 indicates that processor supports RDRAND instruction.

`pub fn has_hypervisor(&self) -> bool`[src]

A value of 1 indicates the indicates the presence of a hypervisor.

`pub fn has_fpu(&self) -> bool`[src]

Floating Point Unit On-Chip. The processor contains an x87 FPU.

`pub fn has_vme(&self) -> bool`[src]

Virtual 8086 Mode Enhancements. Virtual 8086 mode enhancements, including CR4.VME for controlling the feature, CR4.PVI for protected mode virtual interrupts, software interrupt indirection, expansion of the TSS with the software indirection bitmap, and EFLAGS.VIF and EFLAGS.VIP flags.

`pub fn has_de(&self) -> bool`[src]

Debugging Extensions. Support for I/O breakpoints, including CR4.DE for controlling the feature, and optional trapping of accesses to DR4 and DR5.

`pub fn has_pse(&self) -> bool`[src]

Page Size Extension. Large pages of size 4 MByte are supported, including CR4.PSE for controlling the feature, the defined dirty bit in PDE (Page Directory Entries), optional reserved bit trapping in CR3, PDEs, and PTEs.

`pub fn has_tsc(&self) -> bool`[src]

Time Stamp Counter. The RDTSC instruction is supported, including CR4.TSD for controlling privilege.

`pub fn has_msr(&self) -> bool`[src]

Model Specific Registers RDMSR and WRMSR Instructions. The RDMSR and WRMSR instructions are supported. Some of the MSRs are implementation dependent.

`pub fn has_pae(&self) -> bool`[src]

Physical Address Extension. Physical addresses greater than 32 bits are supported: extended page table entry formats, an extra level in the page translation tables is defined, 2-MByte pages are supported instead of 4 Mbyte pages if PAE bit is 1.

`pub fn has_mce(&self) -> bool`[src]

Machine Check Exception. Exception 18 is defined for Machine Checks, including CR4.MCE for controlling the feature. This feature does not define the model-specific implementations of machine-check error logging, reporting, and processor shutdowns. Machine Check exception handlers may have to depend on processor version to do model specific processing of the exception, or test for the presence of the Machine Check feature.

`pub fn has_cmpxchg8b(&self) -> bool`[src]

CMPXCHG8B Instruction. The compare-and-exchange 8 bytes (64 bits) instruction is supported (implicitly locked and atomic).

`pub fn has_apic(&self) -> bool`[src]

APIC On-Chip. The processor contains an Advanced Programmable Interrupt Controller (APIC), responding to memory mapped commands in the physical address range FFFE0000H to FFFE0FFFH (by default - some processors permit the APIC to be relocated).

`pub fn has_sysenter_sysexit(&self) -> bool`[src]

SYSENTER and SYSEXIT Instructions. The SYSENTER and SYSEXIT and associated MSRs are supported.

`pub fn has_mtrr(&self) -> bool`[src]

Memory Type Range Registers. MTRRs are supported. The MTRRcap MSR contains feature bits that describe what memory types are supported, how many variable MTRRs are supported, and whether fixed MTRRs are supported.

`pub fn has_pge(&self) -> bool`[src]

Page Global Bit. The global bit is supported in paging-structure entries that map a page, indicating TLB entries that are common to different processes and need not be flushed. The CR4.PGE bit controls this feature.

`pub fn has_mca(&self) -> bool`[src]

Machine Check Architecture. A value of 1 indicates the Machine Check Architecture of reporting machine errors is supported. The MCG_CAP MSR contains feature bits describing how many banks of error reporting MSRs are supported.

`pub fn has_cmov(&self) -> bool`[src]

Conditional Move Instructions. The conditional move instruction CMOV is supported. In addition, if x87 FPU is present as indicated by the CPUID.FPU feature bit, then the FCOMI and FCMOV instructions are supported

`pub fn has_pat(&self) -> bool`[src]

Page Attribute Table. Page Attribute Table is supported. This feature augments the Memory Type Range Registers (MTRRs), allowing an operating system to specify attributes of memory accessed through a linear address on a 4KB granularity.

`pub fn has_pse36(&self) -> bool`[src]

36-Bit Page Size Extension. 4-MByte pages addressing physical memory beyond 4 GBytes are supported with 32-bit paging. This feature indicates that upper bits of the physical address of a 4-MByte page are encoded in bits 20:13 of the page-directory entry. Such physical addresses are limited by MAXPHYADDR and may be up to 40 bits in size.

`pub fn has_psn(&self) -> bool`[src]

Processor Serial Number. The processor supports the 96-bit processor identification number feature and the feature is enabled.

`pub fn has_clflush(&self) -> bool`[src]

CLFLUSH Instruction. CLFLUSH Instruction is supported.

`pub fn has_ds(&self) -> bool`[src]

Debug Store. The processor supports the ability to write debug information into a memory resident buffer. This feature is used by the branch trace store (BTS) and processor event-based sampling (PEBS) facilities (see Chapter 23, Introduction to Virtual-Machine Extensions, in the Intel® 64 and IA-32 Architectures Software Developers Manual, Volume 3C).

`pub fn has_acpi(&self) -> bool`[src]

Thermal Monitor and Software Controlled Clock Facilities. The processor implements internal MSRs that allow processor temperature to be monitored and processor performance to be modulated in predefined duty cycles under software control.

`pub fn has_mmx(&self) -> bool`[src]

Intel MMX Technology. The processor supports the Intel MMX technology.

`pub fn has_fxsave_fxstor(&self) -> bool`[src]

FXSAVE and FXRSTOR Instructions. The FXSAVE and FXRSTOR instructions are supported for fast save and restore of the floating point context. Presence of this bit also indicates that CR4.OSFXSR is available for an operating system to indicate that it supports the FXSAVE and FXRSTOR instructions.

`pub fn has_sse(&self) -> bool`[src]

SSE. The processor supports the SSE extensions.

`pub fn has_sse2(&self) -> bool`[src]

SSE2. The processor supports the SSE2 extensions.

`pub fn has_ss(&self) -> bool`[src]

Self Snoop. The processor supports the management of conflicting memory types by performing a snoop of its own cache structure for transactions issued to the bus.

`pub fn has_htt(&self) -> bool`[src]

Max APIC IDs reserved field is Valid. A value of 0 for HTT indicates there is only a single logical processor in the package and software should assume only a single APIC ID is reserved. A value of 1 for HTT indicates the value in CPUID.1.EBX[23:16] (the Maximum number of addressable IDs for logical processors in this package) is valid for the package.

`pub fn has_tm(&self) -> bool`[src]

Thermal Monitor. The processor implements the thermal monitor automatic thermal control circuitry (TCC).

`pub fn has_pbe(&self) -> bool`[src]

Pending Break Enable. The processor supports the use of the FERR#/PBE# pin when the processor is in the stop-clock state (STPCLK# is asserted) to signal the processor that an interrupt is pending and that the processor should return to normal operation to handle the interrupt. Bit 10 (PBE enable) in the IA32_MISC_ENABLE MSR enables this capability.

Trait Implementations

`impl Debug for FeatureInfo`[src]

`fn fmt(&self, f: &mut Formatter<'_>) -> Result`[src]

`impl Default for FeatureInfo`[src]

`fn default() -> FeatureInfo`[src]

Auto Trait Implementations

`impl Send for FeatureInfo`

`impl Sync for FeatureInfo`

`impl Unpin for FeatureInfo`

Blanket Implementations

`impl<T> Any for T where T: 'static + ?Sized,` [src]

`pub fn type_id(&self) -> TypeId`[src]

`impl<T> Borrow<T> for T where T: ?Sized,` [src]

`pub fn borrow(&self) -> &T`[src]

`impl<T> BorrowMut<T> for T where T: ?Sized,` [src]

`pub fn borrow_mut(&mut self) -> &mut T`[src]

`impl<T> From<T> for T`[src]

`pub fn from(t: T) -> T`[src]

`impl<T, U> Into for T where U: From<T>,` [src]

`pub fn into(self) -> U`[src]

`impl<T, U> TryFrom for T where U: Into<T>,` [src]

`type Error = Infallible`

The type returned in the event of a conversion error.

`pub fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>`[src]

`impl<T, U> TryInto for T where U: TryFrom<T>,` [src]

`type Error = >::Error`

The type returned in the event of a conversion error.

[−][src]Struct raw_cpuid::FeatureInfo

Implementations

impl FeatureInfo[src]

pub fn extended_family_id(&self) -> u8[src]

pub fn extended_model_id(&self) -> u8[src]

pub fn family_id(&self) -> u8[src]

pub fn model_id(&self) -> u8[src]

pub fn stepping_id(&self) -> u8[src]

pub fn brand_index(&self) -> u8[src]

pub fn cflush_cache_line_size(&self) -> u8[src]

pub fn initial_local_apic_id(&self) -> u8[src]

pub fn max_logical_processor_ids(&self) -> u8[src]

pub fn has_sse3(&self) -> bool[src]

pub fn has_pclmulqdq(&self) -> bool[src]

pub fn has_ds_area(&self) -> bool[src]

pub fn has_monitor_mwait(&self) -> bool[src]

pub fn has_cpl(&self) -> bool[src]

pub fn has_vmx(&self) -> bool[src]

pub fn has_smx(&self) -> bool[src]

pub fn has_eist(&self) -> bool[src]

pub fn has_tm2(&self) -> bool[src]

pub fn has_ssse3(&self) -> bool[src]

pub fn has_cnxtid(&self) -> bool[src]

pub fn has_fma(&self) -> bool[src]

pub fn has_cmpxchg16b(&self) -> bool[src]

pub fn has_pdcm(&self) -> bool[src]

pub fn has_pcid(&self) -> bool[src]

pub fn has_dca(&self) -> bool[src]

pub fn has_sse41(&self) -> bool[src]

pub fn has_sse42(&self) -> bool[src]

pub fn has_x2apic(&self) -> bool[src]

pub fn has_movbe(&self) -> bool[src]

pub fn has_popcnt(&self) -> bool[src]

pub fn has_tsc_deadline(&self) -> bool[src]

pub fn has_aesni(&self) -> bool[src]

pub fn has_xsave(&self) -> bool[src]

pub fn has_oxsave(&self) -> bool[src]

pub fn has_avx(&self) -> bool[src]

pub fn has_f16c(&self) -> bool[src]

pub fn has_rdrand(&self) -> bool[src]

pub fn has_hypervisor(&self) -> bool[src]

pub fn has_fpu(&self) -> bool[src]

pub fn has_vme(&self) -> bool[src]

pub fn has_de(&self) -> bool[src]

pub fn has_pse(&self) -> bool[src]

pub fn has_tsc(&self) -> bool[src]

pub fn has_msr(&self) -> bool[src]

pub fn has_pae(&self) -> bool[src]

pub fn has_mce(&self) -> bool[src]

pub fn has_cmpxchg8b(&self) -> bool[src]

pub fn has_apic(&self) -> bool[src]

pub fn has_sysenter_sysexit(&self) -> bool[src]

pub fn has_mtrr(&self) -> bool[src]

pub fn has_pge(&self) -> bool[src]

pub fn has_mca(&self) -> bool[src]

pub fn has_cmov(&self) -> bool[src]

pub fn has_pat(&self) -> bool[src]

pub fn has_pse36(&self) -> bool[src]

pub fn has_psn(&self) -> bool[src]

pub fn has_clflush(&self) -> bool[src]

pub fn has_ds(&self) -> bool[src]

pub fn has_acpi(&self) -> bool[src]

pub fn has_mmx(&self) -> bool[src]

pub fn has_fxsave_fxstor(&self) -> bool[src]

pub fn has_sse(&self) -> bool[src]

pub fn has_sse2(&self) -> bool[src]

pub fn has_ss(&self) -> bool[src]

pub fn has_htt(&self) -> bool[src]

pub fn has_tm(&self) -> bool[src]

pub fn has_pbe(&self) -> bool[src]