Struct syscall::flag::CloneFlags
source · [−]pub struct CloneFlags { /* private fields */ }
Implementations
sourceimpl CloneFlags
impl CloneFlags
pub const CLONE_VM: Self = _
pub const CLONE_FS: Self = _
pub const CLONE_FILES: Self = _
pub const CLONE_SIGHAND: Self = _
pub const CLONE_VFORK: Self = _
pub const CLONE_THREAD: Self = _
pub const CLONE_STACK: Self = _
sourcepub const fn from_bits(bits: usize) -> Option<Self>
pub const fn from_bits(bits: usize) -> Option<Self>
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
sourcepub const fn from_bits_truncate(bits: usize) -> Self
pub const fn from_bits_truncate(bits: usize) -> Self
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
sourcepub const unsafe fn from_bits_unchecked(bits: usize) -> Self
pub const unsafe fn from_bits_unchecked(bits: usize) -> Self
Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).
Safety
The caller of the bitflags!
macro can chose to allow or
disallow extra bits for their bitflags type.
The caller of from_bits_unchecked()
has to ensure that
all bits correspond to a defined flag or that extra bits
are valid for this bitflags type.
sourcepub const fn intersects(&self, other: Self) -> bool
pub const fn intersects(&self, other: Self) -> bool
Returns true
if there are flags common to both self
and other
.
sourcepub const fn contains(&self, other: Self) -> bool
pub const fn contains(&self, other: Self) -> bool
Returns true
if all of the flags in other
are contained within self
.
sourcepub fn set(&mut self, other: Self, value: bool)
pub fn set(&mut self, other: Self, value: bool)
Inserts or removes the specified flags depending on the passed value.
sourcepub const fn intersection(self, other: Self) -> Self
pub const fn intersection(self, other: Self) -> Self
Returns the intersection between the flags in self
and
other
.
Specifically, the returned set contains only the flags which are
present in both self
and other
.
This is equivalent to using the &
operator (e.g.
ops::BitAnd
), as in flags & other
.
sourcepub const fn union(self, other: Self) -> Self
pub const fn union(self, other: Self) -> Self
Returns the union of between the flags in self
and other
.
Specifically, the returned set contains all flags which are
present in either self
or other
, including any which are
present in both (see Self::symmetric_difference
if that
is undesirable).
This is equivalent to using the |
operator (e.g.
ops::BitOr
), as in flags | other
.
sourcepub const fn difference(self, other: Self) -> Self
pub const fn difference(self, other: Self) -> Self
Returns the difference between the flags in self
and other
.
Specifically, the returned set contains all flags present in
self
, except for the ones present in other
.
It is also conceptually equivalent to the “bit-clear” operation:
flags & !other
(and this syntax is also supported).
This is equivalent to using the -
operator (e.g.
ops::Sub
), as in flags - other
.
sourcepub const fn symmetric_difference(self, other: Self) -> Self
pub const fn symmetric_difference(self, other: Self) -> Self
Returns the symmetric difference between the flags
in self
and other
.
Specifically, the returned set contains the flags present which
are present in self
or other
, but that are not present in
both. Equivalently, it contains the flags present in exactly
one of the sets self
and other
.
This is equivalent to using the ^
operator (e.g.
ops::BitXor
), as in flags ^ other
.
sourcepub const fn complement(self) -> Self
pub const fn complement(self) -> Self
Returns the complement of this set of flags.
Specifically, the returned set contains all the flags which are
not set in self
, but which are allowed for this type.
Alternatively, it can be thought of as the set difference
between Self::all()
and self
(e.g. Self::all() - self
)
This is equivalent to using the !
operator (e.g.
ops::Not
), as in !flags
.
Trait Implementations
sourceimpl Binary for CloneFlags
impl Binary for CloneFlags
sourceimpl BitAnd<CloneFlags> for CloneFlags
impl BitAnd<CloneFlags> for CloneFlags
type Output = CloneFlags
type Output = CloneFlags
The resulting type after applying the &
operator.
sourceimpl BitAndAssign<CloneFlags> for CloneFlags
impl BitAndAssign<CloneFlags> for CloneFlags
sourcefn bitand_assign(&mut self, other: Self)
fn bitand_assign(&mut self, other: Self)
Disables all flags disabled in the set.
sourceimpl BitOr<CloneFlags> for CloneFlags
impl BitOr<CloneFlags> for CloneFlags
sourcefn bitor(self, other: CloneFlags) -> Self
fn bitor(self, other: CloneFlags) -> Self
Returns the union of the two sets of flags.
type Output = CloneFlags
type Output = CloneFlags
The resulting type after applying the |
operator.
sourceimpl BitOrAssign<CloneFlags> for CloneFlags
impl BitOrAssign<CloneFlags> for CloneFlags
sourcefn bitor_assign(&mut self, other: Self)
fn bitor_assign(&mut self, other: Self)
Adds the set of flags.
sourceimpl BitXor<CloneFlags> for CloneFlags
impl BitXor<CloneFlags> for CloneFlags
sourcefn bitxor(self, other: Self) -> Self
fn bitxor(self, other: Self) -> Self
Returns the left flags, but with all the right flags toggled.
type Output = CloneFlags
type Output = CloneFlags
The resulting type after applying the ^
operator.
sourceimpl BitXorAssign<CloneFlags> for CloneFlags
impl BitXorAssign<CloneFlags> for CloneFlags
sourcefn bitxor_assign(&mut self, other: Self)
fn bitxor_assign(&mut self, other: Self)
Toggles the set of flags.
sourceimpl Clone for CloneFlags
impl Clone for CloneFlags
sourcefn clone(&self) -> CloneFlags
fn clone(&self) -> CloneFlags
Returns a copy of the value. Read more
1.0.0 · sourcefn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
sourceimpl Debug for CloneFlags
impl Debug for CloneFlags
sourceimpl Default for CloneFlags
impl Default for CloneFlags
sourcefn default() -> CloneFlags
fn default() -> CloneFlags
Returns the “default value” for a type. Read more
sourceimpl Extend<CloneFlags> for CloneFlags
impl Extend<CloneFlags> for CloneFlags
sourcefn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)
fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)
Extends a collection with the contents of an iterator. Read more
sourcefn extend_one(&mut self, item: A)
fn extend_one(&mut self, item: A)
extend_one
)Extends a collection with exactly one element.
sourcefn extend_reserve(&mut self, additional: usize)
fn extend_reserve(&mut self, additional: usize)
extend_one
)Reserves capacity in a collection for the given number of additional elements. Read more
sourceimpl FromIterator<CloneFlags> for CloneFlags
impl FromIterator<CloneFlags> for CloneFlags
sourcefn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self
fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self
Creates a value from an iterator. Read more
sourceimpl Hash for CloneFlags
impl Hash for CloneFlags
sourceimpl LowerHex for CloneFlags
impl LowerHex for CloneFlags
sourceimpl Not for CloneFlags
impl Not for CloneFlags
type Output = CloneFlags
type Output = CloneFlags
The resulting type after applying the !
operator.
sourceimpl Octal for CloneFlags
impl Octal for CloneFlags
sourceimpl Ord for CloneFlags
impl Ord for CloneFlags
sourceimpl PartialEq<CloneFlags> for CloneFlags
impl PartialEq<CloneFlags> for CloneFlags
sourcefn eq(&self, other: &CloneFlags) -> bool
fn eq(&self, other: &CloneFlags) -> bool
This method tests for self
and other
values to be equal, and is used
by ==
. Read more
sourcefn ne(&self, other: &CloneFlags) -> bool
fn ne(&self, other: &CloneFlags) -> bool
This method tests for !=
.
sourceimpl PartialOrd<CloneFlags> for CloneFlags
impl PartialOrd<CloneFlags> for CloneFlags
sourcefn partial_cmp(&self, other: &CloneFlags) -> Option<Ordering>
fn partial_cmp(&self, other: &CloneFlags) -> Option<Ordering>
This method returns an ordering between self
and other
values if one exists. Read more
1.0.0 · sourcefn lt(&self, other: &Rhs) -> bool
fn lt(&self, other: &Rhs) -> bool
This method tests less than (for self
and other
) and is used by the <
operator. Read more
1.0.0 · sourcefn le(&self, other: &Rhs) -> bool
fn le(&self, other: &Rhs) -> bool
This method tests less than or equal to (for self
and other
) and is used by the <=
operator. Read more
sourceimpl Sub<CloneFlags> for CloneFlags
impl Sub<CloneFlags> for CloneFlags
type Output = CloneFlags
type Output = CloneFlags
The resulting type after applying the -
operator.
sourceimpl SubAssign<CloneFlags> for CloneFlags
impl SubAssign<CloneFlags> for CloneFlags
sourcefn sub_assign(&mut self, other: Self)
fn sub_assign(&mut self, other: Self)
Disables all flags enabled in the set.
sourceimpl UpperHex for CloneFlags
impl UpperHex for CloneFlags
impl Copy for CloneFlags
impl Eq for CloneFlags
impl StructuralEq for CloneFlags
impl StructuralPartialEq for CloneFlags
Auto Trait Implementations
impl RefUnwindSafe for CloneFlags
impl Send for CloneFlags
impl Sync for CloneFlags
impl Unpin for CloneFlags
impl UnwindSafe for CloneFlags
Blanket Implementations
sourceimpl<T> BorrowMut<T> for T where
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
const: unstable · sourcefn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more