Struct syscall::flag::MunmapFlags
source · pub struct MunmapFlags { /* private fields */ }
Implementations§
source§impl MunmapFlags
impl MunmapFlags
sourcepub const NEEDS_SYNC: Self = _
pub const NEEDS_SYNC: Self = _
Indicates whether the funmap call must implicitly do an msync, for the changes to become visible later.
This flag will currently be set if and only if MAP_SHARED | PROT_WRITE are set.
sourcepub const fn from_bits(bits: usize) -> Option<Self>
pub const fn from_bits(bits: usize) -> Option<Self>
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
sourcepub const fn from_bits_truncate(bits: usize) -> Self
pub const fn from_bits_truncate(bits: usize) -> Self
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
sourcepub const unsafe fn from_bits_unchecked(bits: usize) -> Self
pub const unsafe fn from_bits_unchecked(bits: usize) -> Self
Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).
Safety
The caller of the bitflags!
macro can chose to allow or
disallow extra bits for their bitflags type.
The caller of from_bits_unchecked()
has to ensure that
all bits correspond to a defined flag or that extra bits
are valid for this bitflags type.
sourcepub const fn intersects(&self, other: Self) -> bool
pub const fn intersects(&self, other: Self) -> bool
Returns true
if there are flags common to both self
and other
.
sourcepub const fn contains(&self, other: Self) -> bool
pub const fn contains(&self, other: Self) -> bool
Returns true
if all of the flags in other
are contained within self
.
sourcepub fn set(&mut self, other: Self, value: bool)
pub fn set(&mut self, other: Self, value: bool)
Inserts or removes the specified flags depending on the passed value.
sourcepub const fn intersection(self, other: Self) -> Self
pub const fn intersection(self, other: Self) -> Self
Returns the intersection between the flags in self
and
other
.
Specifically, the returned set contains only the flags which are
present in both self
and other
.
This is equivalent to using the &
operator (e.g.
ops::BitAnd
), as in flags & other
.
sourcepub const fn union(self, other: Self) -> Self
pub const fn union(self, other: Self) -> Self
Returns the union of between the flags in self
and other
.
Specifically, the returned set contains all flags which are
present in either self
or other
, including any which are
present in both (see Self::symmetric_difference
if that
is undesirable).
This is equivalent to using the |
operator (e.g.
ops::BitOr
), as in flags | other
.
sourcepub const fn difference(self, other: Self) -> Self
pub const fn difference(self, other: Self) -> Self
Returns the difference between the flags in self
and other
.
Specifically, the returned set contains all flags present in
self
, except for the ones present in other
.
It is also conceptually equivalent to the “bit-clear” operation:
flags & !other
(and this syntax is also supported).
This is equivalent to using the -
operator (e.g.
ops::Sub
), as in flags - other
.
sourcepub const fn symmetric_difference(self, other: Self) -> Self
pub const fn symmetric_difference(self, other: Self) -> Self
Returns the symmetric difference between the flags
in self
and other
.
Specifically, the returned set contains the flags present which
are present in self
or other
, but that are not present in
both. Equivalently, it contains the flags present in exactly
one of the sets self
and other
.
This is equivalent to using the ^
operator (e.g.
ops::BitXor
), as in flags ^ other
.
sourcepub const fn complement(self) -> Self
pub const fn complement(self) -> Self
Returns the complement of this set of flags.
Specifically, the returned set contains all the flags which are
not set in self
, but which are allowed for this type.
Alternatively, it can be thought of as the set difference
between Self::all()
and self
(e.g. Self::all() - self
)
This is equivalent to using the !
operator (e.g.
ops::Not
), as in !flags
.
Trait Implementations§
source§impl Binary for MunmapFlags
impl Binary for MunmapFlags
source§impl BitAnd<MunmapFlags> for MunmapFlags
impl BitAnd<MunmapFlags> for MunmapFlags
source§impl BitAndAssign<MunmapFlags> for MunmapFlags
impl BitAndAssign<MunmapFlags> for MunmapFlags
source§fn bitand_assign(&mut self, other: Self)
fn bitand_assign(&mut self, other: Self)
Disables all flags disabled in the set.
source§impl BitOr<MunmapFlags> for MunmapFlags
impl BitOr<MunmapFlags> for MunmapFlags
source§fn bitor(self, other: MunmapFlags) -> Self
fn bitor(self, other: MunmapFlags) -> Self
Returns the union of the two sets of flags.
§type Output = MunmapFlags
type Output = MunmapFlags
|
operator.source§impl BitOrAssign<MunmapFlags> for MunmapFlags
impl BitOrAssign<MunmapFlags> for MunmapFlags
source§fn bitor_assign(&mut self, other: Self)
fn bitor_assign(&mut self, other: Self)
Adds the set of flags.
source§impl BitXor<MunmapFlags> for MunmapFlags
impl BitXor<MunmapFlags> for MunmapFlags
source§impl BitXorAssign<MunmapFlags> for MunmapFlags
impl BitXorAssign<MunmapFlags> for MunmapFlags
source§fn bitxor_assign(&mut self, other: Self)
fn bitxor_assign(&mut self, other: Self)
Toggles the set of flags.
source§impl Clone for MunmapFlags
impl Clone for MunmapFlags
source§fn clone(&self) -> MunmapFlags
fn clone(&self) -> MunmapFlags
1.0.0 · source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moresource§impl Debug for MunmapFlags
impl Debug for MunmapFlags
source§impl Default for MunmapFlags
impl Default for MunmapFlags
source§fn default() -> MunmapFlags
fn default() -> MunmapFlags
source§impl Extend<MunmapFlags> for MunmapFlags
impl Extend<MunmapFlags> for MunmapFlags
source§fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)
fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)
source§fn extend_one(&mut self, item: A)
fn extend_one(&mut self, item: A)
extend_one
)source§fn extend_reserve(&mut self, additional: usize)
fn extend_reserve(&mut self, additional: usize)
extend_one
)source§impl FromIterator<MunmapFlags> for MunmapFlags
impl FromIterator<MunmapFlags> for MunmapFlags
source§fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self
fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self
source§impl Hash for MunmapFlags
impl Hash for MunmapFlags
source§impl LowerHex for MunmapFlags
impl LowerHex for MunmapFlags
source§impl Not for MunmapFlags
impl Not for MunmapFlags
source§impl Octal for MunmapFlags
impl Octal for MunmapFlags
source§impl Ord for MunmapFlags
impl Ord for MunmapFlags
source§fn cmp(&self, other: &MunmapFlags) -> Ordering
fn cmp(&self, other: &MunmapFlags) -> Ordering
1.21.0 · source§fn max(self, other: Self) -> Selfwhere
Self: Sized,
fn max(self, other: Self) -> Selfwhere Self: Sized,
source§impl PartialEq<MunmapFlags> for MunmapFlags
impl PartialEq<MunmapFlags> for MunmapFlags
source§fn eq(&self, other: &MunmapFlags) -> bool
fn eq(&self, other: &MunmapFlags) -> bool
self
and other
values to be equal, and is used
by ==
.source§impl PartialOrd<MunmapFlags> for MunmapFlags
impl PartialOrd<MunmapFlags> for MunmapFlags
source§fn partial_cmp(&self, other: &MunmapFlags) -> Option<Ordering>
fn partial_cmp(&self, other: &MunmapFlags) -> Option<Ordering>
1.0.0 · source§fn le(&self, other: &Rhs) -> bool
fn le(&self, other: &Rhs) -> bool
self
and other
) and is used by the <=
operator. Read moresource§impl Sub<MunmapFlags> for MunmapFlags
impl Sub<MunmapFlags> for MunmapFlags
source§impl SubAssign<MunmapFlags> for MunmapFlags
impl SubAssign<MunmapFlags> for MunmapFlags
source§fn sub_assign(&mut self, other: Self)
fn sub_assign(&mut self, other: Self)
Disables all flags enabled in the set.