Struct rusty_v8::OwnedIsolate

pub struct OwnedIsolate { /* fields omitted */ }

Same as Isolate but gets disposed when it goes out of scope.

Methods from Deref<Target = Isolate>

pub fn thread_safe_handle(&self) -> IsolateHandle

pub fn terminate_execution(&self) -> bool

See IsolateHandle::terminate_execution

pub fn cancel_terminate_execution(&self) -> bool

See IsolateHandle::cancel_terminate_execution

pub fn is_execution_terminating(&self) -> bool

See IsolateHandle::is_execution_terminating

pub fn get_slot<T: 'static>(&self) -> Option<&T>

Get a reference to embedder data added with set_slot().

pub fn get_slot_mut<T: 'static>(&mut self) -> Option<&mut T>

Get a mutable reference to embedder data added with set_slot().

pub fn set_slot<T: 'static>(&mut self, value: T) -> bool

Use with Isolate::get_slot and Isolate::get_slot_mut to associate state with an Isolate.

This method gives ownership of value to the Isolate. Exactly one object of each type can be associated with an Isolate. If called more than once with an object of the same type, the earlier version will be dropped and replaced.

Returns true if value was set without replacing an existing value.

The value will be dropped when the isolate is dropped.

pub unsafe fn enter(&mut self)

Sets this isolate as the entered one for the current thread. Saves the previously entered one (if any), so that it can be restored when exiting. Re-entering an isolate is allowed.

rusty_v8 note: Unlike in the C++ API, the isolate is entered when it is constructed and exited when dropped.

pub unsafe fn exit(&mut self)

Exits this isolate by restoring the previously entered one in the current thread. The isolate may still stay the same, if it was entered more than once.

Requires: self == Isolate::GetCurrent().

rusty_v8 note: Unlike in the C++ API, the isolate is entered when it is constructed and exited when dropped.

pub fn clear_kept_objects(&mut self)

Clears the set of objects held strongly by the heap. This set of objects are originally built when a WeakRef is created or successfully dereferenced.

This is invoked automatically after microtasks are run. See MicrotasksPolicy for when microtasks are run.

This needs to be manually invoked only if the embedder is manually running microtasks via a custom MicrotaskQueue class’s PerformCheckpoint. In that case, it is the embedder’s responsibility to make this call at a time which does not interrupt synchronous ECMAScript code execution.

pub fn low_memory_notification(&mut self)

Optional notification that the system is running low on memory. V8 uses these notifications to attempt to free memory.

pub fn get_heap_statistics(&mut self, s: &mut HeapStatistics)

Get statistics about the heap memory usage.

pub fn set_capture_stack_trace_for_uncaught_exceptions(
    &mut self,
    capture: bool,
    frame_limit: i32
)

Tells V8 to capture current stack trace when uncaught exception occurs and report it to the message listeners. The option is off by default.

pub fn add_message_listener(&mut self, callback: MessageCallback) -> bool

Adds a message listener (errors only).

The same message listener can be added more than once and in that case it will be called more than once for each message.

The exception object will be passed to the callback.

pub fn set_prepare_stack_trace_callback<'s>(
    &mut self,
    callback: impl MapFnTo<extern "C" fn(_: Local<'s, Context>, _: Local<'s, Value>, _: Local<'s, Array>) -> *const Value>
)

This specifies the callback called when the stack property of Error is accessed.

PrepareStackTraceCallback is called when the stack property of an error is first accessed. The return value will be used as the stack value. If this callback is registed, the |Error.prepareStackTrace| API will be disabled. |sites| is an array of call sites, specified in https://v8.dev/docs/stack-trace-api

pub fn set_promise_hook(&mut self, hook: PromiseHook)

Set the PromiseHook callback for various promise lifecycle events.

pub fn set_promise_reject_callback(&mut self, callback: PromiseRejectCallback)

Set callback to notify about promise reject with no handler, or revocation of such a previous notification once the handler is added.

pub fn set_host_initialize_import_meta_object_callback(
    &mut self,
    callback: HostInitializeImportMetaObjectCallback
)

This specifies the callback called by the upcoming importa.meta language feature to retrieve host-defined meta data for a module.

pub fn set_host_import_module_dynamically_callback(
    &mut self,
    callback: HostImportModuleDynamicallyWithImportAssertionsCallback
)

This specifies the callback called by the upcoming dynamic import() language feature to load modules.

pub fn add_near_heap_limit_callback(
    &mut self,
    callback: NearHeapLimitCallback,
    data: *mut c_void
)

Add a callback to invoke in case the heap size is close to the heap limit. If multiple callbacks are added, only the most recently added callback is invoked.

pub fn remove_near_heap_limit_callback(
    &mut self,
    callback: NearHeapLimitCallback,
    heap_limit: usize
)

Remove the given callback and restore the heap limit to the given limit. If the given limit is zero, then it is ignored. If the current heap size is greater than the given limit, then the heap limit is restored to the minimal limit that is possible for the current heap size.

pub fn set_oom_error_handler(
    &mut self,
    callback: extern "C" fn(location: *const c_char, is_heap_oom: bool)
)

pub fn get_microtasks_policy(&self) -> MicrotasksPolicy

Returns the policy controlling how Microtasks are invoked.

pub fn set_microtasks_policy(&mut self, policy: MicrotasksPolicy)

Returns the policy controlling how Microtasks are invoked.

pub fn perform_microtask_checkpoint(&mut self)

Runs the default MicrotaskQueue until it gets empty and perform other microtask checkpoint steps, such as calling ClearKeptObjects. Asserts that the MicrotasksPolicy is not kScoped. Any exceptions thrown by microtask callbacks are swallowed.

pub fn run_microtasks(&mut self)

👎 Deprecated:

Use Isolate::perform_microtask_checkpoint() instead

An alias for PerformMicrotaskCheckpoint.

pub fn enqueue_microtask(&mut self, microtask: Local<'_, Function>)

Enqueues the callback to the default MicrotaskQueue

pub fn set_allow_atomics_wait(&mut self, allow: bool)

Set whether calling Atomics.wait (a function that may block) is allowed in this isolate. This can also be configured via CreateParams::allow_atomics_wait.

pub fn set_wasm_streaming_callback<F>(&mut self, _: F) where
    F: UnitType + Fn(&mut HandleScope<'_>, Local<'_, Value>, WasmStreaming), 

Embedder injection point for WebAssembly.compileStreaming(source). The expectation is that the embedder sets it at most once.

The callback receives the source argument (string, Promise, etc.) and an instance of WasmStreaming. The WasmStreaming instance can outlive the callback and is used to feed data chunks to V8 asynchronously.

pub fn take_heap_snapshot<F>(&mut self, callback: F) where
    F: FnMut(&[u8]) -> bool, 

Take a heap snapshot. The callback is invoked one or more times with byte slices containing the snapshot serialized as JSON. It’s the callback’s responsibility to reassemble them into a single document, e.g., by writing them to a file. Note that Chrome DevTools refuses to load snapshots without a .heapsnapshot suffix.

Trait Implementations

impl Debug for OwnedIsolate

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Deref for OwnedIsolate

type Target = Isolate

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl DerefMut for OwnedIsolate

fn deref_mut(&mut self) -> &mut Self::Target

Mutably dereferences the value.

impl Drop for OwnedIsolate

fn drop(&mut self)

Executes the destructor for this type.