Struct scale_info::prelude::collections::BinaryHeap

pub struct BinaryHeap<T> { /* fields omitted */ }

A priority queue implemented with a binary heap.

This will be a max-heap.

It is a logic error for an item to be modified in such a way that the item’s ordering relative to any other item, as determined by the Ord trait, changes while it is in the heap. This is normally only possible through Cell, RefCell, global state, I/O, or unsafe code. The behavior resulting from such a logic error is not specified, but will not result in undefined behavior. This could include panics, incorrect results, aborts, memory leaks, and non-termination.

Examples

use std::collections::BinaryHeap;

// Type inference lets us omit an explicit type signature (which
// would be `BinaryHeap<i32>` in this example).
let mut heap = BinaryHeap::new();

// We can use peek to look at the next item in the heap. In this case,
// there's no items in there yet so we get None.
assert_eq!(heap.peek(), None);

// Let's add some scores...
heap.push(1);
heap.push(5);
heap.push(2);

// Now peek shows the most important item in the heap.
assert_eq!(heap.peek(), Some(&5));

// We can check the length of a heap.
assert_eq!(heap.len(), 3);

// We can iterate over the items in the heap, although they are returned in
// a random order.
for x in &heap {
    println!("{}", x);
}

// If we instead pop these scores, they should come back in order.
assert_eq!(heap.pop(), Some(5));
assert_eq!(heap.pop(), Some(2));
assert_eq!(heap.pop(), Some(1));
assert_eq!(heap.pop(), None);

// We can clear the heap of any remaining items.
heap.clear();

// The heap should now be empty.
assert!(heap.is_empty())

A BinaryHeap with a known list of items can be initialized from an array:

use std::collections::BinaryHeap;

let heap = BinaryHeap::from([1, 5, 2]);

Min-heap

Either std::cmp::Reverse or a custom Ord implementation can be used to make BinaryHeap a min-heap. This makes heap.pop() return the smallest value instead of the greatest one.

use std::collections::BinaryHeap;
use std::cmp::Reverse;

let mut heap = BinaryHeap::new();

// Wrap values in `Reverse`
heap.push(Reverse(1));
heap.push(Reverse(5));
heap.push(Reverse(2));

// If we pop these scores now, they should come back in the reverse order.
assert_eq!(heap.pop(), Some(Reverse(1)));
assert_eq!(heap.pop(), Some(Reverse(2)));
assert_eq!(heap.pop(), Some(Reverse(5)));
assert_eq!(heap.pop(), None);

Time complexity

push	pop	peek/peek_mut
O(1)~	O(log(n))	O(1)

The value for push is an expected cost; the method documentation gives a more detailed analysis.

Implementations

impl<T> BinaryHeap<T> where
    T: Ord, 

pub fn new() -> BinaryHeap<T>

Creates an empty BinaryHeap as a max-heap.

Examples

Basic usage:

use std::collections::BinaryHeap;
let mut heap = BinaryHeap::new();
heap.push(4);

pub fn with_capacity(capacity: usize) -> BinaryHeap<T>

Creates an empty BinaryHeap with a specific capacity. This preallocates enough memory for capacity elements, so that the BinaryHeap does not have to be reallocated until it contains at least that many values.

Examples

Basic usage:

use std::collections::BinaryHeap;
let mut heap = BinaryHeap::with_capacity(10);
heap.push(4);

pub fn peek_mut(&mut self) -> Option<PeekMut<'_, T>>

Returns a mutable reference to the greatest item in the binary heap, or None if it is empty.

Note: If the PeekMut value is leaked, the heap may be in an inconsistent state.

Examples

Basic usage:

use std::collections::BinaryHeap;
let mut heap = BinaryHeap::new();
assert!(heap.peek_mut().is_none());

heap.push(1);
heap.push(5);
heap.push(2);
{
    let mut val = heap.peek_mut().unwrap();
    *val = 0;
}
assert_eq!(heap.peek(), Some(&2));

Time complexity

If the item is modified then the worst case time complexity is O(log(n)), otherwise it’s O(1).

pub fn pop(&mut self) -> Option<T>

Removes the greatest item from the binary heap and returns it, or None if it is empty.

Examples

Basic usage:

use std::collections::BinaryHeap;
let mut heap = BinaryHeap::from(vec![1, 3]);

assert_eq!(heap.pop(), Some(3));
assert_eq!(heap.pop(), Some(1));
assert_eq!(heap.pop(), None);

Time complexity

The worst case cost of pop on a heap containing n elements is O(log(n)).

pub fn push(&mut self, item: T)

Pushes an item onto the binary heap.

Examples

Basic usage:

use std::collections::BinaryHeap;
let mut heap = BinaryHeap::new();
heap.push(3);
heap.push(5);
heap.push(1);

assert_eq!(heap.len(), 3);
assert_eq!(heap.peek(), Some(&5));

Time complexity

The expected cost of push, averaged over every possible ordering of the elements being pushed, and over a sufficiently large number of pushes, is O(1). This is the most meaningful cost metric when pushing elements that are not already in any sorted pattern.

The time complexity degrades if elements are pushed in predominantly ascending order. In the worst case, elements are pushed in ascending sorted order and the amortized cost per push is O(log(n)) against a heap containing n elements.

The worst case cost of a single call to push is O(n). The worst case occurs when capacity is exhausted and needs a resize. The resize cost has been amortized in the previous figures.

pub fn into_sorted_vec(self) -> Vec<T, Global>

Consumes the BinaryHeap and returns a vector in sorted (ascending) order.

Examples

Basic usage:

use std::collections::BinaryHeap;

let mut heap = BinaryHeap::from(vec![1, 2, 4, 5, 7]);
heap.push(6);
heap.push(3);

let vec = heap.into_sorted_vec();
assert_eq!(vec, [1, 2, 3, 4, 5, 6, 7]);

pub fn append(&mut self, other: &mut BinaryHeap<T>)

Moves all the elements of other into self, leaving other empty.

Examples

Basic usage:

use std::collections::BinaryHeap;

let v = vec![-10, 1, 2, 3, 3];
let mut a = BinaryHeap::from(v);

let v = vec![-20, 5, 43];
let mut b = BinaryHeap::from(v);

a.append(&mut b);

assert_eq!(a.into_sorted_vec(), [-20, -10, 1, 2, 3, 3, 5, 43]);
assert!(b.is_empty());

pub fn drain_sorted(&mut self) -> DrainSorted<'_, T>

🔬 This is a nightly-only experimental API. (binary_heap_drain_sorted)

Returns an iterator which retrieves elements in heap order. The retrieved elements are removed from the original heap. The remaining elements will be removed on drop in heap order.

Note:

• .drain_sorted() is O(n * log(n)); much slower than .drain(). You should use the latter for most cases.

Examples

Basic usage:

#![feature(binary_heap_drain_sorted)]
use std::collections::BinaryHeap;

let mut heap = BinaryHeap::from(vec![1, 2, 3, 4, 5]);
assert_eq!(heap.len(), 5);

drop(heap.drain_sorted()); // removes all elements in heap order
assert_eq!(heap.len(), 0);

pub fn retain<F>(&mut self, f: F) where
    F: FnMut(&T) -> bool, 

🔬 This is a nightly-only experimental API. (binary_heap_retain)

Retains only the elements specified by the predicate.

In other words, remove all elements e such that f(&e) returns false. The elements are visited in unsorted (and unspecified) order.

Examples

Basic usage:

#![feature(binary_heap_retain)]
use std::collections::BinaryHeap;

let mut heap = BinaryHeap::from(vec![-10, -5, 1, 2, 4, 13]);

heap.retain(|x| x % 2 == 0); // only keep even numbers

assert_eq!(heap.into_sorted_vec(), [-10, 2, 4])

impl<T> BinaryHeap<T>

pub fn iter(&self) -> Iter<'_, T>

Returns an iterator visiting all values in the underlying vector, in arbitrary order.

Examples

Basic usage:

use std::collections::BinaryHeap;
let heap = BinaryHeap::from(vec![1, 2, 3, 4]);

// Print 1, 2, 3, 4 in arbitrary order
for x in heap.iter() {
    println!("{}", x);
}

pub fn into_iter_sorted(self) -> IntoIterSorted<T>

🔬 This is a nightly-only experimental API. (binary_heap_into_iter_sorted)

Returns an iterator which retrieves elements in heap order. This method consumes the original heap.

Examples

Basic usage:

#![feature(binary_heap_into_iter_sorted)]
use std::collections::BinaryHeap;
let heap = BinaryHeap::from(vec![1, 2, 3, 4, 5]);

assert_eq!(heap.into_iter_sorted().take(2).collect::<Vec<_>>(), vec![5, 4]);

pub fn peek(&self) -> Option<&T>

Returns the greatest item in the binary heap, or None if it is empty.

Examples

Basic usage:

use std::collections::BinaryHeap;
let mut heap = BinaryHeap::new();
assert_eq!(heap.peek(), None);

heap.push(1);
heap.push(5);
heap.push(2);
assert_eq!(heap.peek(), Some(&5));

Time complexity

Cost is O(1) in the worst case.

pub fn capacity(&self) -> usize

Returns the number of elements the binary heap can hold without reallocating.

Examples

Basic usage:

use std::collections::BinaryHeap;
let mut heap = BinaryHeap::with_capacity(100);
assert!(heap.capacity() >= 100);
heap.push(4);

pub fn reserve_exact(&mut self, additional: usize)

Reserves the minimum capacity for exactly additional more elements to be inserted in the given BinaryHeap. Does nothing if the capacity is already sufficient.

Note that the allocator may give the collection more space than it requests. Therefore capacity can not be relied upon to be precisely minimal. Prefer reserve if future insertions are expected.

Panics

Panics if the new capacity overflows usize.

Examples

Basic usage:

use std::collections::BinaryHeap;
let mut heap = BinaryHeap::new();
heap.reserve_exact(100);
assert!(heap.capacity() >= 100);
heap.push(4);

pub fn reserve(&mut self, additional: usize)

Reserves capacity for at least additional more elements to be inserted in the BinaryHeap. The collection may reserve more space to avoid frequent reallocations.

Panics

Panics if the new capacity overflows usize.

Examples

Basic usage:

use std::collections::BinaryHeap;
let mut heap = BinaryHeap::new();
heap.reserve(100);
assert!(heap.capacity() >= 100);
heap.push(4);

pub fn shrink_to_fit(&mut self)

Discards as much additional capacity as possible.

Examples

Basic usage:

use std::collections::BinaryHeap;
let mut heap: BinaryHeap<i32> = BinaryHeap::with_capacity(100);

assert!(heap.capacity() >= 100);
heap.shrink_to_fit();
assert!(heap.capacity() == 0);

pub fn shrink_to(&mut self, min_capacity: usize)

Discards capacity with a lower bound.

The capacity will remain at least as large as both the length and the supplied value.

If the current capacity is less than the lower limit, this is a no-op.

Examples

use std::collections::BinaryHeap;
let mut heap: BinaryHeap<i32> = BinaryHeap::with_capacity(100);

assert!(heap.capacity() >= 100);
heap.shrink_to(10);
assert!(heap.capacity() >= 10);

pub fn as_slice(&self) -> &[T]

🔬 This is a nightly-only experimental API. (binary_heap_as_slice)

Returns a slice of all values in the underlying vector, in arbitrary order.

Examples

Basic usage:

#![feature(binary_heap_as_slice)]
use std::collections::BinaryHeap;
use std::io::{self, Write};

let heap = BinaryHeap::from(vec![1, 2, 3, 4, 5, 6, 7]);

io::sink().write(heap.as_slice()).unwrap();

pub fn into_vec(self) -> Vec<T, Global>

Consumes the BinaryHeap and returns the underlying vector in arbitrary order.

Examples

Basic usage:

use std::collections::BinaryHeap;
let heap = BinaryHeap::from(vec![1, 2, 3, 4, 5, 6, 7]);
let vec = heap.into_vec();

// Will print in some order
for x in vec {
    println!("{}", x);
}

pub fn len(&self) -> usize

Returns the length of the binary heap.

Examples

Basic usage:

use std::collections::BinaryHeap;
let heap = BinaryHeap::from(vec![1, 3]);

assert_eq!(heap.len(), 2);

pub fn is_empty(&self) -> bool

Checks if the binary heap is empty.

Examples

Basic usage:

use std::collections::BinaryHeap;
let mut heap = BinaryHeap::new();

assert!(heap.is_empty());

heap.push(3);
heap.push(5);
heap.push(1);

assert!(!heap.is_empty());

pub fn drain(&mut self) -> Drain<'_, T>

Clears the binary heap, returning an iterator over the removed elements.

The elements are removed in arbitrary order.

Examples

Basic usage:

use std::collections::BinaryHeap;
let mut heap = BinaryHeap::from(vec![1, 3]);

assert!(!heap.is_empty());

for x in heap.drain() {
    println!("{}", x);
}

assert!(heap.is_empty());

pub fn clear(&mut self)

Drops all items from the binary heap.

Examples

Basic usage:

use std::collections::BinaryHeap;
let mut heap = BinaryHeap::from(vec![1, 3]);

assert!(!heap.is_empty());

heap.clear();

assert!(heap.is_empty());

Trait Implementations

impl<T> Clone for BinaryHeap<T> where
    T: Clone, 

pub fn clone(&self) -> BinaryHeap<T>

Returns a copy of the value.

pub fn clone_from(&mut self, source: &BinaryHeap<T>)

Performs copy-assignment from source.

impl<T> Debug for BinaryHeap<T> where
    T: Debug, 

pub fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<T> Decode for BinaryHeap<T> where
    T: Decode + Ord, 

pub fn decode<I>(input: &mut I) -> Result<BinaryHeap<T>, Error> where
    I: Input, 

Attempt to deserialise the value from input.

fn skip<I>(input: &mut I) -> Result<(), Error> where
    I: Input, 

Attempt to skip the encoded value from input.

fn encoded_fixed_size() -> Option<usize>

Returns the fixed encoded size of the type.

impl<T> DecodeLength for BinaryHeap<T>

pub fn len(self_encoded: &[u8]) -> Result<usize, Error>

Return the number of elements in self_encoded.

impl<T> Default for BinaryHeap<T> where
    T: Ord, 

pub fn default() -> BinaryHeap<T>

Creates an empty BinaryHeap<T>.

impl<'de, T> Deserialize<'de> for BinaryHeap<T> where
    T: Deserialize<'de> + Ord, 

pub fn deserialize<D>(
    deserializer: D
) -> Result<BinaryHeap<T>, <D as Deserializer<'de>>::Error> where
    D: Deserializer<'de>, 

Deserialize this value from the given Serde deserializer.

pub fn deserialize_in_place<D>(
    deserializer: D,
    place: &mut BinaryHeap<T>
) -> Result<(), <D as Deserializer<'de>>::Error> where
    D: Deserializer<'de>, 

impl<T> Encode for BinaryHeap<T> where
    T: Encode, 

pub fn size_hint(&self) -> usize

If possible give a hint of expected size of the encoding.

pub fn encode_to<W>(&self, dest: &mut W) where
    W: Output + ?Sized, 

Convert self to a slice and append it to the destination.

fn encode(&self) -> Vec<u8, Global>

Convert self to an owned vector.

fn using_encoded<R, F>(&self, f: F) -> R where
    F: FnOnce(&[u8]) -> R, 

Convert self to a slice and then invoke the given closure with it.

fn encoded_size(&self) -> usize

Calculates the encoded size.

impl<'a, T> Extend<&'a T> for BinaryHeap<T> where
    T: 'a + Ord + Copy, 

pub fn extend<I>(&mut self, iter: I) where
    I: IntoIterator<Item = &'a T>, 

Extends a collection with the contents of an iterator.

pub fn extend_one(&mut self, &'a T)

🔬 This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

pub fn extend_reserve(&mut self, additional: usize)

🔬 This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl<T> Extend<T> for BinaryHeap<T> where
    T: Ord, 

pub fn extend<I>(&mut self, iter: I) where
    I: IntoIterator<Item = T>, 

Extends a collection with the contents of an iterator.

pub fn extend_one(&mut self, item: T)

🔬 This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

pub fn extend_reserve(&mut self, additional: usize)

🔬 This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl<T, const N: usize> From<[T; N]> for BinaryHeap<T> where
    T: Ord, 

pub fn from(arr: [T; N]) -> BinaryHeap<T>

use std::collections::BinaryHeap;

let mut h1 = BinaryHeap::from([1, 4, 2, 3]);
let mut h2: BinaryHeap<_> = [1, 4, 2, 3].into();
while let Some((a, b)) = h1.pop().zip(h2.pop()) {
    assert_eq!(a, b);
}

impl<T> From<BinaryHeap<T>> for Vec<T, Global>

pub fn from(heap: BinaryHeap<T>) -> Vec<T, Global>

Converts a BinaryHeap<T> into a Vec<T>.

This conversion requires no data movement or allocation, and has constant time complexity.

impl<T> From<Vec<T, Global>> for BinaryHeap<T> where
    T: Ord, 

pub fn from(vec: Vec<T, Global>) -> BinaryHeap<T>

Converts a Vec<T> into a BinaryHeap<T>.

This conversion happens in-place, and has O(n) time complexity.

impl<T> FromIterator<T> for BinaryHeap<T> where
    T: Ord, 

pub fn from_iter<I>(iter: I) -> BinaryHeap<T> where
    I: IntoIterator<Item = T>, 

Creates a value from an iterator.

impl<T> IntoIterator for BinaryHeap<T>

pub fn into_iter(self) -> IntoIter<T>

Creates a consuming iterator, that is, one that moves each value out of the binary heap in arbitrary order. The binary heap cannot be used after calling this.

Examples

Basic usage:

use std::collections::BinaryHeap;
let heap = BinaryHeap::from(vec![1, 2, 3, 4]);

// Print 1, 2, 3, 4 in arbitrary order
for x in heap.into_iter() {
    // x has type i32, not &i32
    println!("{}", x);
}

type Item = T

The type of the elements being iterated over.

type IntoIter = IntoIter<T>

Which kind of iterator are we turning this into?

impl<'a, T> IntoIterator for &'a BinaryHeap<T>

type Item = &'a T

The type of the elements being iterated over.

type IntoIter = Iter<'a, T>

Which kind of iterator are we turning this into?

pub fn into_iter(self) -> Iter<'a, T>

Creates an iterator from a value.

impl<T> Serialize for BinaryHeap<T> where
    T: Serialize + Ord, 

pub fn serialize<S>(
    &self,
    serializer: S
) -> Result<<S as Serializer>::Ok, <S as Serializer>::Error> where
    S: Serializer, 

Serialize this value into the given Serde serializer.

impl<'_, T, LikeT> EncodeLike<&'_ [(LikeT,)]> for BinaryHeap<T> where
    T: EncodeLike<LikeT>,
    LikeT: Encode, 

impl<'_, T, LikeT> EncodeLike<BinaryHeap<LikeT>> for &'_ [(T,)] where
    T: EncodeLike<LikeT>,
    LikeT: Encode, 

impl<T, LikeT> EncodeLike<BinaryHeap<LikeT>> for BinaryHeap<T> where
    T: EncodeLike<LikeT>,
    LikeT: Encode,