soroban_env_common

Struct ConversionError

Source 
pub struct ConversionError;
Expand description

Error type indicating a failure to convert some type to another; details of the failed conversion may be written to the debug log, when possible.

This is intentionally minimal and uninformative to minimize impact of its use on wasm codesize. It converts to Error(ScErrorType::Value, ScErrorCode::UnexpectedType) when converted to a full Error, and ideally it should only be used in ubiquitous cases that will occur in wasm, like small-number or tag conversions, where code size is paramount and the information-loss from using it is not too bad.

Trait Implementations§

Source§

impl Debug for ConversionError

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl From<ConversionError> for Error

Source§

fn from(_: ConversionError) -> Self

Converts to this type from the input type.
Source§

impl From<Error> for ConversionError

Source§

fn from(_: Error) -> Self

Converts to this type from the input type.
Source§

impl From<Error> for ConversionError

Source§

fn from(_: Error) -> Self

Converts to this type from the input type.
Source§

impl From<Infallible> for ConversionError

Source§

fn from(_: Infallible) -> Self

Converts to this type from the input type.
Source§

impl From<SymbolError> for ConversionError

Source§

fn from(_: SymbolError) -> Self

Converts to this type from the input type.
Source§

impl PartialEq for ConversionError

Source§

fn eq(&self, other: &ConversionError) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
Source§

impl Eq for ConversionError

Source§

impl StructuralPartialEq for ConversionError

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T, C> Compare<&T> for C
where C: Compare<T>,

Source§

type Error = <C as Compare<T>>::Error

Source§

fn compare(&self, a: &&T, b: &&T) -> Result<Ordering, <C as Compare<&T>>::Error>

Source§

impl<T, U, E, C> Compare<(T, U)> for C
where C: Compare<T, Error = E, Error = E> + Compare<U>,

Source§

type Error = E

Source§

fn compare( &self, a: &(T, U), b: &(T, U), ) -> Result<Ordering, <C as Compare<(T, U)>>::Error>

Source§

impl<T, U, V, E, C> Compare<(T, U, V)> for C
where C: Compare<T, Error = E, Error = E, Error = E> + Compare<U> + Compare<V>,

Source§

type Error = E

Source§

fn compare( &self, a: &(T, U, V), b: &(T, U, V), ) -> Result<Ordering, <C as Compare<(T, U, V)>>::Error>

Source§

impl<T, U, V, W, E, C> Compare<(T, U, V, W)> for C
where C: Compare<T, Error = E, Error = E, Error = E, Error = E> + Compare<U> + Compare<V> + Compare<W>,

Source§

type Error = E

Source§

fn compare( &self, a: &(T, U, V, W), b: &(T, U, V, W), ) -> Result<Ordering, <C as Compare<(T, U, V, W)>>::Error>

Source§

impl<T, U, V, W, X, E, C> Compare<(T, U, V, W, X)> for C
where C: Compare<T, Error = E, Error = E, Error = E, Error = E, Error = E> + Compare<U> + Compare<V> + Compare<W> + Compare<X>,

Source§

type Error = E

Source§

fn compare( &self, a: &(T, U, V, W, X), b: &(T, U, V, W, X), ) -> Result<Ordering, <C as Compare<(T, U, V, W, X)>>::Error>

Source§

impl<T, C> Compare<Box<T>> for C
where C: Compare<T>,

Source§

type Error = <C as Compare<T>>::Error

Source§

fn compare( &self, a: &Box<T>, b: &Box<T>, ) -> Result<Ordering, <C as Compare<Box<T>>>::Error>

Source§

impl<T, C> Compare<Option<T>> for C
where C: Compare<T>,

Source§

type Error = <C as Compare<T>>::Error

Source§

fn compare( &self, a: &Option<T>, b: &Option<T>, ) -> Result<Ordering, <C as Compare<Option<T>>>::Error>

Source§

impl<T, C> Compare<Rc<T>> for C
where C: Compare<T>,

Source§

type Error = <C as Compare<T>>::Error

Source§

fn compare( &self, a: &Rc<T>, b: &Rc<T>, ) -> Result<Ordering, <C as Compare<Rc<T>>>::Error>

Source§

impl<T, C> Compare<Vec<T>> for C
where C: Compare<T>,

Source§

type Error = <C as Compare<T>>::Error

Source§

fn compare( &self, a: &Vec<T>, b: &Vec<T>, ) -> Result<Ordering, <C as Compare<Vec<T>>>::Error>

Source§

impl<T> Downcast for T
where T: Any,

Source§

fn into_any(self: Box<T>) -> Box<dyn Any>

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.
Source§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.
Source§

fn as_any(&self) -> &(dyn Any + 'static)

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.
Source§

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.
Source§

impl<T> DowncastSync for T
where T: Any + Send + Sync,

Source§

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Sync + Send>

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait.
Source§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

Source§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
Source§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

Source§

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<E, T, U> TryIntoVal<E, T> for U
where E: Env, T: TryFromVal<E, U>,

Source§

type Error = <T as TryFromVal<E, U>>::Error

Source§

fn try_into_val(&self, env: &E) -> Result<T, <U as TryIntoVal<E, T>>::Error>