Struct ConfigSettingContractLedgerCostV0

pub struct ConfigSettingContractLedgerCostV0 {

    pub ledger_max_read_ledger_entries: u32,
    pub ledger_max_read_bytes: u32,
    pub ledger_max_write_ledger_entries: u32,
    pub ledger_max_write_bytes: u32,
    pub tx_max_read_ledger_entries: u32,
    pub tx_max_read_bytes: u32,
    pub tx_max_write_ledger_entries: u32,
    pub tx_max_write_bytes: u32,
    pub fee_read_ledger_entry: i64,
    pub fee_write_ledger_entry: i64,
    pub fee_read1_kb: i64,
    pub bucket_list_target_size_bytes: i64,
    pub write_fee1_kb_bucket_list_low: i64,
    pub write_fee1_kb_bucket_list_high: i64,
    pub bucket_list_write_fee_growth_factor: u32,
}

ConfigSettingContractLedgerCostV0 is an XDR Struct defines as:

struct ConfigSettingContractLedgerCostV0
{
    // Maximum number of ledger entry read operations per ledger
    uint32 ledgerMaxReadLedgerEntries;
    // Maximum number of bytes that can be read per ledger
    uint32 ledgerMaxReadBytes;
    // Maximum number of ledger entry write operations per ledger
    uint32 ledgerMaxWriteLedgerEntries;
    // Maximum number of bytes that can be written per ledger
    uint32 ledgerMaxWriteBytes;

    // Maximum number of ledger entry read operations per transaction
    uint32 txMaxReadLedgerEntries;
    // Maximum number of bytes that can be read per transaction
    uint32 txMaxReadBytes;
    // Maximum number of ledger entry write operations per transaction
    uint32 txMaxWriteLedgerEntries;
    // Maximum number of bytes that can be written per transaction
    uint32 txMaxWriteBytes;

    int64 feeReadLedgerEntry;  // Fee per ledger entry read
    int64 feeWriteLedgerEntry; // Fee per ledger entry write

    int64 feeRead1KB;  // Fee for reading 1KB

    // The following parameters determine the write fee per 1KB.
    // Write fee grows linearly until bucket list reaches this size
    int64 bucketListTargetSizeBytes;
    // Fee per 1KB write when the bucket list is empty
    int64 writeFee1KBBucketListLow;
    // Fee per 1KB write when the bucket list has reached `bucketListTargetSizeBytes`
    int64 writeFee1KBBucketListHigh;
    // Write fee multiplier for any additional data past the first `bucketListTargetSizeBytes`
    uint32 bucketListWriteFeeGrowthFactor;
};

Fields

ledger_max_read_ledger_entries: u32

ledger_max_read_bytes: u32

ledger_max_write_ledger_entries: u32

ledger_max_write_bytes: u32

tx_max_read_ledger_entries: u32

tx_max_read_bytes: u32

tx_max_write_ledger_entries: u32

tx_max_write_bytes: u32

fee_read_ledger_entry: i64

fee_write_ledger_entry: i64

fee_read1_kb: i64

bucket_list_target_size_bytes: i64

write_fee1_kb_bucket_list_low: i64

write_fee1_kb_bucket_list_high: i64

bucket_list_write_fee_growth_factor: u32

Trait Implementations

impl<'arbitrary> Arbitrary<'arbitrary> for ConfigSettingContractLedgerCostV0

fn arbitrary( u: &mut Unstructured<'arbitrary>, ) -> Result<ConfigSettingContractLedgerCostV0, Error>

Generate an arbitrary value of Self from the given unstructured data.

fn arbitrary_take_rest( u: Unstructured<'arbitrary>, ) -> Result<ConfigSettingContractLedgerCostV0, Error>

Generate an arbitrary value of Self from the entirety of the given unstructured data.

fn size_hint(depth: usize) -> (usize, Option<usize>)

Get a size hint for how many bytes out of an Unstructured this type needs to construct itself.

fn try_size_hint( depth: usize, ) -> Result<(usize, Option<usize>), MaxRecursionReached>

Get a size hint for how many bytes out of an Unstructured this type needs to construct itself.

impl Clone for ConfigSettingContractLedgerCostV0

fn clone(&self) -> ConfigSettingContractLedgerCostV0

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for ConfigSettingContractLedgerCostV0

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<'de> Deserialize<'de> for ConfigSettingContractLedgerCostV0

fn deserialize<__D>( __deserializer: __D, ) -> Result<ConfigSettingContractLedgerCostV0, <__D as Deserializer<'de>>::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl Hash for ConfigSettingContractLedgerCostV0

fn hash<__H>(&self, state: &mut __H)

where __H: Hasher,

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl Ord for ConfigSettingContractLedgerCostV0

fn cmp(&self, other: &ConfigSettingContractLedgerCostV0) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized,

Restrict a value to a certain interval.

impl PartialEq for ConfigSettingContractLedgerCostV0

fn eq(&self, other: &ConfigSettingContractLedgerCostV0) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for ConfigSettingContractLedgerCostV0

fn partial_cmp( &self, other: &ConfigSettingContractLedgerCostV0, ) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl ReadXdr for ConfigSettingContractLedgerCostV0

fn read_xdr<R>( r: &mut Limited<R>, ) -> Result<ConfigSettingContractLedgerCostV0, Error>

where R: Read,

Read the XDR and construct the type.

fn read_xdr_base64<R>(r: &mut Limited<R>) -> Result<Self, Error>

where R: Read,

Construct the type from the XDR bytes base64 encoded.

fn read_xdr_to_end<R>(r: &mut Limited<R>) -> Result<Self, Error>

where R: Read,

Read the XDR and construct the type, and consider it an error if the read does not completely consume the read implementation.

fn read_xdr_base64_to_end<R>(r: &mut Limited<R>) -> Result<Self, Error>

where R: Read,

Construct the type from the XDR bytes base64 encoded.

fn read_xdr_into<R>(&mut self, r: &mut Limited<R>) -> Result<(), Error>

where R: Read,

Read the XDR and construct the type.

fn read_xdr_into_to_end<R>(&mut self, r: &mut Limited<R>) -> Result<(), Error>

where R: Read,

Read the XDR into the existing value, and consider it an error if the read does not completely consume the read implementation.

fn read_xdr_iter<R>(r: &mut Limited<R>) -> ReadXdrIter<&mut R, Self>

where R: Read,

Create an iterator that reads the read implementation as a stream of values that are read into the implementing type.

fn read_xdr_base64_iter<R>( r: &mut Limited<R>, ) -> ReadXdrIter<DecoderReader<'_, R>, Self>

where R: Read,

Create an iterator that reads the read implementation as a stream of values that are read into the implementing type.

fn from_xdr(bytes: impl AsRef<[u8]>, limits: Limits) -> Result<Self, Error>

Construct the type from the XDR bytes.

fn from_xdr_base64(b64: impl AsRef<[u8]>, limits: Limits) -> Result<Self, Error>

Construct the type from the XDR bytes base64 encoded.

impl Serialize for ConfigSettingContractLedgerCostV0

fn serialize<__S>( &self, __serializer: __S, ) -> Result<<__S as Serializer>::Ok, <__S as Serializer>::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.

impl WriteXdr for ConfigSettingContractLedgerCostV0

fn write_xdr<W>(&self, w: &mut Limited<W>) -> Result<(), Error>

where W: Write,

fn to_xdr(&self, limits: Limits) -> Result<Vec<u8>, Error>

fn to_xdr_base64(&self, limits: Limits) -> Result<String, Error>

impl Eq for ConfigSettingContractLedgerCostV0

impl StructuralPartialEq for ConfigSettingContractLedgerCostV0