#[repr(i32)]
pub enum TransactionResultCode {
Show 19 variants TxFeeBumpInnerSuccess = 1, TxSuccess = 0, TxFailed = -1, TxTooEarly = -2, TxTooLate = -3, TxMissingOperation = -4, TxBadSeq = -5, TxBadAuth = -6, TxInsufficientBalance = -7, TxNoAccount = -8, TxInsufficientFee = -9, TxBadAuthExtra = -10, TxInternalError = -11, TxNotSupported = -12, TxFeeBumpInnerFailed = -13, TxBadSponsorship = -14, TxBadMinSeqAgeOrGap = -15, TxMalformed = -16, TxSorobanInvalid = -17,
}
Expand description

TransactionResultCode is an XDR Enum defines as:

enum TransactionResultCode
{
    txFEE_BUMP_INNER_SUCCESS = 1, // fee bump inner transaction succeeded
    txSUCCESS = 0,                // all operations succeeded

    txFAILED = -1, // one of the operations failed (none were applied)

    txTOO_EARLY = -2,         // ledger closeTime before minTime
    txTOO_LATE = -3,          // ledger closeTime after maxTime
    txMISSING_OPERATION = -4, // no operation was specified
    txBAD_SEQ = -5,           // sequence number does not match source account

    txBAD_AUTH = -6,             // too few valid signatures / wrong network
    txINSUFFICIENT_BALANCE = -7, // fee would bring account below reserve
    txNO_ACCOUNT = -8,           // source account not found
    txINSUFFICIENT_FEE = -9,     // fee is too small
    txBAD_AUTH_EXTRA = -10,      // unused signatures attached to transaction
    txINTERNAL_ERROR = -11,      // an unknown error occurred

    txNOT_SUPPORTED = -12,          // transaction type not supported
    txFEE_BUMP_INNER_FAILED = -13,  // fee bump inner transaction failed
    txBAD_SPONSORSHIP = -14,        // sponsorship not confirmed
    txBAD_MIN_SEQ_AGE_OR_GAP = -15, // minSeqAge or minSeqLedgerGap conditions not met
    txMALFORMED = -16,              // precondition is invalid
    txSOROBAN_INVALID = -17         // soroban-specific preconditions were not met
};

Variants§

§

TxFeeBumpInnerSuccess = 1

§

TxSuccess = 0

§

TxFailed = -1

§

TxTooEarly = -2

§

TxTooLate = -3

§

TxMissingOperation = -4

§

TxBadSeq = -5

§

TxBadAuth = -6

§

TxInsufficientBalance = -7

§

TxNoAccount = -8

§

TxInsufficientFee = -9

§

TxBadAuthExtra = -10

§

TxInternalError = -11

§

TxNotSupported = -12

§

TxFeeBumpInnerFailed = -13

§

TxBadSponsorship = -14

§

TxBadMinSeqAgeOrGap = -15

§

TxMalformed = -16

§

TxSorobanInvalid = -17

Implementations§

§

impl TransactionResultCode

pub const VARIANTS: [TransactionResultCode; 19] = _

pub const VARIANTS_STR: [&'static str; 19] = _

pub const fn name(&self) -> &'static str

pub const fn variants() -> [TransactionResultCode; 19]

Trait Implementations§

§

impl<'arbitrary> Arbitrary<'arbitrary> for TransactionResultCode

§

fn arbitrary( u: &mut Unstructured<'arbitrary> ) -> Result<TransactionResultCode, Error>

Generate an arbitrary value of Self from the given unstructured data. Read more
§

fn arbitrary_take_rest( u: Unstructured<'arbitrary> ) -> Result<TransactionResultCode, Error>

Generate an arbitrary value of Self from the entirety of the given unstructured data. Read more
§

fn size_hint(depth: usize) -> (usize, Option<usize>)

Get a size hint for how many bytes out of an Unstructured this type needs to construct itself. Read more
§

impl Clone for TransactionResultCode

§

fn clone(&self) -> TransactionResultCode

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
§

impl Debug for TransactionResultCode

§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
§

impl<'de> Deserialize<'de> for TransactionResultCode

§

fn deserialize<__D>( __deserializer: __D ) -> Result<TransactionResultCode, <__D as Deserializer<'de>>::Error>
where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer. Read more
§

impl Discriminant<TransactionResultCode> for InnerTransactionResultResult

§

impl Discriminant<TransactionResultCode> for TransactionResultResult

§

impl Display for TransactionResultCode

§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
§

impl Hash for TransactionResultCode

§

fn hash<__H>(&self, state: &mut __H)
where __H: Hasher,

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
§

impl Name for TransactionResultCode

§

fn name(&self) -> &'static str

§

impl Ord for TransactionResultCode

§

fn cmp(&self, other: &TransactionResultCode) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 · source§

fn max(self, other: Self) -> Self
where Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · source§

fn min(self, other: Self) -> Self
where Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · source§

fn clamp(self, min: Self, max: Self) -> Self
where Self: Sized + PartialOrd,

Restrict a value to a certain interval. Read more
§

impl PartialEq for TransactionResultCode

§

fn eq(&self, other: &TransactionResultCode) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
§

impl PartialOrd for TransactionResultCode

§

fn partial_cmp(&self, other: &TransactionResultCode) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
§

impl ReadXdr for TransactionResultCode

§

fn read_xdr<R>(r: &mut Limited<R>) -> Result<TransactionResultCode, Error>
where R: Read,

Read the XDR and construct the type. Read more
§

fn read_xdr_base64<R>(r: &mut Limited<R>) -> Result<Self, Error>
where R: Read,

Construct the type from the XDR bytes base64 encoded. Read more
§

fn read_xdr_to_end<R>(r: &mut Limited<R>) -> Result<Self, Error>
where R: Read,

Read the XDR and construct the type, and consider it an error if the read does not completely consume the read implementation. Read more
§

fn read_xdr_base64_to_end<R>(r: &mut Limited<R>) -> Result<Self, Error>
where R: Read,

Construct the type from the XDR bytes base64 encoded. Read more
§

fn read_xdr_into<R>(&mut self, r: &mut Limited<R>) -> Result<(), Error>
where R: Read,

Read the XDR and construct the type. Read more
§

fn read_xdr_into_to_end<R>(&mut self, r: &mut Limited<R>) -> Result<(), Error>
where R: Read,

Read the XDR into the existing value, and consider it an error if the read does not completely consume the read implementation. Read more
§

fn read_xdr_iter<R>(r: &mut Limited<R>) -> ReadXdrIter<&mut R, Self>
where R: Read,

Create an iterator that reads the read implementation as a stream of values that are read into the implementing type. Read more
§

fn read_xdr_base64_iter<R>( r: &mut Limited<R> ) -> ReadXdrIter<DecoderReader<'_, R>, Self>
where R: Read,

Create an iterator that reads the read implementation as a stream of values that are read into the implementing type.
§

fn from_xdr(bytes: impl AsRef<[u8]>, limits: Limits) -> Result<Self, Error>

Construct the type from the XDR bytes. Read more
§

fn from_xdr_base64(b64: impl AsRef<[u8]>, limits: Limits) -> Result<Self, Error>

Construct the type from the XDR bytes base64 encoded. Read more
§

impl Serialize for TransactionResultCode

§

fn serialize<__S>( &self, __serializer: __S ) -> Result<<__S as Serializer>::Ok, <__S as Serializer>::Error>
where __S: Serializer,

Serialize this value into the given Serde serializer. Read more
§

impl TryFrom<i32> for TransactionResultCode

§

type Error = Error

The type returned in the event of a conversion error.
§

fn try_from(i: i32) -> Result<TransactionResultCode, Error>

Performs the conversion.
§

impl Variants<TransactionResultCode> for InnerTransactionResultResult

§

impl Variants<TransactionResultCode> for TransactionResultCode

§

impl Variants<TransactionResultCode> for TransactionResultResult

§

impl WriteXdr for TransactionResultCode

§

fn write_xdr<W>(&self, w: &mut Limited<W>) -> Result<(), Error>
where W: Write,

§

fn to_xdr(&self, limits: Limits) -> Result<Vec<u8>, Error>

§

fn to_xdr_base64(&self, limits: Limits) -> Result<String, Error>

§

impl Copy for TransactionResultCode

§

impl Enum for TransactionResultCode

§

impl Eq for TransactionResultCode

§

impl StructuralEq for TransactionResultCode

§

impl StructuralPartialEq for TransactionResultCode

§

impl Union<TransactionResultCode> for InnerTransactionResultResult

§

impl Union<TransactionResultCode> for TransactionResultResult

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
§

impl<T, C> Compare<&T> for C
where C: Compare<T>,

§

type Error = <C as Compare<T>>::Error

§

fn compare(&self, a: &&T, b: &&T) -> Result<Ordering, <C as Compare<&T>>::Error>

§

impl<T, U, E, C> Compare<(T, U)> for C
where C: Compare<T, Error = E, Error = E> + Compare<U>,

§

type Error = E

§

fn compare( &self, a: &(T, U), b: &(T, U) ) -> Result<Ordering, <C as Compare<(T, U)>>::Error>

§

impl<T, U, V, E, C> Compare<(T, U, V)> for C
where C: Compare<T, Error = E, Error = E, Error = E> + Compare<U> + Compare<V>,

§

type Error = E

§

fn compare( &self, a: &(T, U, V), b: &(T, U, V) ) -> Result<Ordering, <C as Compare<(T, U, V)>>::Error>

§

impl<T, U, V, W, E, C> Compare<(T, U, V, W)> for C
where C: Compare<T, Error = E, Error = E, Error = E, Error = E> + Compare<U> + Compare<V> + Compare<W>,

§

type Error = E

§

fn compare( &self, a: &(T, U, V, W), b: &(T, U, V, W) ) -> Result<Ordering, <C as Compare<(T, U, V, W)>>::Error>

§

impl<T, U, V, W, X, E, C> Compare<(T, U, V, W, X)> for C
where C: Compare<T, Error = E, Error = E, Error = E, Error = E, Error = E> + Compare<U> + Compare<V> + Compare<W> + Compare<X>,

§

type Error = E

§

fn compare( &self, a: &(T, U, V, W, X), b: &(T, U, V, W, X) ) -> Result<Ordering, <C as Compare<(T, U, V, W, X)>>::Error>

§

impl<T, C> Compare<Box<T>> for C
where C: Compare<T>,

§

type Error = <C as Compare<T>>::Error

§

fn compare( &self, a: &Box<T>, b: &Box<T> ) -> Result<Ordering, <C as Compare<Box<T>>>::Error>

§

impl<T, C> Compare<Option<T>> for C
where C: Compare<T>,

§

type Error = <C as Compare<T>>::Error

§

fn compare( &self, a: &Option<T>, b: &Option<T> ) -> Result<Ordering, <C as Compare<Option<T>>>::Error>

§

impl<T, C> Compare<Rc<T>> for C
where C: Compare<T>,

§

type Error = <C as Compare<T>>::Error

§

fn compare( &self, a: &Rc<T>, b: &Rc<T> ) -> Result<Ordering, <C as Compare<Rc<T>>>::Error>

§

impl<T, C> Compare<Vec<T>> for C
where C: Compare<T>,

§

type Error = <C as Compare<T>>::Error

§

fn compare( &self, a: &Vec<T>, b: &Vec<T> ) -> Result<Ordering, <C as Compare<Vec<T>>>::Error>

§

impl<T> Downcast for T
where T: Any,

§

fn into_any(self: Box<T>) -> Box<dyn Any>

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.
§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.
§

fn as_any(&self) -> &(dyn Any + 'static)

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.
§

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.
§

impl<T> DowncastSync for T
where T: Any + Send + Sync,

§

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Send + Sync>

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait.
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<E, T, U> IntoVal<E, T> for U
where E: Env, T: FromVal<E, U>,

source§

fn into_val(&self, e: &E) -> T

source§

impl<T> Same for T

§

type Output = T

Should always be Self
source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T> ToString for T
where T: Display + ?Sized,

source§

default fn to_string(&self) -> String

Converts the given value to a String. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<E, T, U> TryIntoVal<E, T> for U
where E: Env, T: TryFromVal<E, U>,

§

type Error = <T as TryFromVal<E, U>>::Error

§

fn try_into_val(&self, env: &E) -> Result<T, <U as TryIntoVal<E, T>>::Error>

§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V

source§

impl<T> DeserializeOwned for T
where T: for<'de> Deserialize<'de>,