Enum stellar_xdr::curr::LiquidityPoolWithdrawResultCode

#[repr(i32)]
pub enum LiquidityPoolWithdrawResultCode {
    Success = 0,
    Malformed = -1,
    NoTrust = -2,
    Underfunded = -3,
    LineFull = -4,
    UnderMinimum = -5,
}

Available on crate feature curr only.

LiquidityPoolWithdrawResultCode is an XDR Enum defines as:

enum LiquidityPoolWithdrawResultCode
{
    // codes considered as "success" for the operation
    LIQUIDITY_POOL_WITHDRAW_SUCCESS = 0,

    // codes considered as "failure" for the operation
    LIQUIDITY_POOL_WITHDRAW_MALFORMED = -1,    // bad input
    LIQUIDITY_POOL_WITHDRAW_NO_TRUST = -2,     // no trust line for one of the
                                               // assets
    LIQUIDITY_POOL_WITHDRAW_UNDERFUNDED = -3,  // not enough balance of the
                                               // pool share
    LIQUIDITY_POOL_WITHDRAW_LINE_FULL = -4,    // would go above limit for one
                                               // of the assets
    LIQUIDITY_POOL_WITHDRAW_UNDER_MINIMUM = -5 // didn't withdraw enough
};

Variants

Success = 0

Malformed = -1

NoTrust = -2

Underfunded = -3

LineFull = -4

UnderMinimum = -5

Implementations

impl LiquidityPoolWithdrawResultCode

pub const VARIANTS: [LiquidityPoolWithdrawResultCode; 6] = _

pub const VARIANTS_STR: [&'static str; 6] = _

pub const fn name(&self) -> &'static str

pub const fn variants() -> [LiquidityPoolWithdrawResultCode; 6]

Trait Implementations

impl<'arbitrary> Arbitrary<'arbitrary> for LiquidityPoolWithdrawResultCode

fn arbitrary(u: &mut Unstructured<'arbitrary>) -> Result<Self>

Generate an arbitrary value of Self from the given unstructured data.

fn arbitrary_take_rest(u: Unstructured<'arbitrary>) -> Result<Self>

Generate an arbitrary value of Self from the entirety of the given unstructured data.

fn size_hint(depth: usize) -> (usize, Option<usize>)

Get a size hint for how many bytes out of an Unstructured this type needs to construct itself.

impl Clone for LiquidityPoolWithdrawResultCode

fn clone(&self) -> LiquidityPoolWithdrawResultCode

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for LiquidityPoolWithdrawResultCode

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<'de> Deserialize<'de> for LiquidityPoolWithdrawResultCode

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl Discriminant<LiquidityPoolWithdrawResultCode> for LiquidityPoolWithdrawResult

fn discriminant(&self) -> LiquidityPoolWithdrawResultCode

impl Display for LiquidityPoolWithdrawResultCode

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl From<LiquidityPoolWithdrawResultCode> for i32

fn from(e: LiquidityPoolWithdrawResultCode) -> Self

Converts to this type from the input type.

impl Hash for LiquidityPoolWithdrawResultCode

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl Name for LiquidityPoolWithdrawResultCode

fn name(&self) -> &'static str

impl Ord for LiquidityPoolWithdrawResultCode

fn cmp(&self, other: &LiquidityPoolWithdrawResultCode) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized + PartialOrd,

Restrict a value to a certain interval.

impl PartialEq for LiquidityPoolWithdrawResultCode

fn eq(&self, other: &LiquidityPoolWithdrawResultCode) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for LiquidityPoolWithdrawResultCode

fn partial_cmp( &self, other: &LiquidityPoolWithdrawResultCode ) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl ReadXdr for LiquidityPoolWithdrawResultCode

fn read_xdr<R: Read>(r: &mut Limited<R>) -> Result<Self, Error>

Available on crate feature std only.

Read the XDR and construct the type.

fn read_xdr_base64<R: Read>(r: &mut Limited<R>) -> Result<Self, Error>

Available on crate feature base64 only.

Construct the type from the XDR bytes base64 encoded.

fn read_xdr_to_end<R: Read>(r: &mut Limited<R>) -> Result<Self, Error>

Available on crate feature std only.

Read the XDR and construct the type, and consider it an error if the read does not completely consume the read implementation.

fn read_xdr_base64_to_end<R: Read>(r: &mut Limited<R>) -> Result<Self, Error>

Available on crate feature base64 only.

Construct the type from the XDR bytes base64 encoded.

fn read_xdr_into<R: Read>(&mut self, r: &mut Limited<R>) -> Result<(), Error>

Available on crate feature std only.

Read the XDR and construct the type.

fn read_xdr_into_to_end<R: Read>( &mut self, r: &mut Limited<R> ) -> Result<(), Error>

Available on crate feature std only.

Read the XDR into the existing value, and consider it an error if the read does not completely consume the read implementation.

fn read_xdr_iter<R: Read>(r: &mut Limited<R>) -> ReadXdrIter<&mut R, Self>

Available on crate feature std only.

Create an iterator that reads the read implementation as a stream of values that are read into the implementing type.

fn read_xdr_base64_iter<R: Read>( r: &mut Limited<R> ) -> ReadXdrIter<DecoderReader<'_, R>, Self>

Available on crate feature base64 only.

Create an iterator that reads the read implementation as a stream of values that are read into the implementing type.

fn from_xdr(bytes: impl AsRef<[u8]>, limits: Limits) -> Result<Self, Error>

Available on crate feature std only.

Construct the type from the XDR bytes.

fn from_xdr_base64(b64: impl AsRef<[u8]>, limits: Limits) -> Result<Self, Error>

Available on crate feature base64 only.

Construct the type from the XDR bytes base64 encoded.

impl Serialize for LiquidityPoolWithdrawResultCode

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.

impl TryFrom<i32> for LiquidityPoolWithdrawResultCode

type Error = Error

The type returned in the event of a conversion error.

fn try_from(i: i32) -> Result<Self, Error>

Performs the conversion.

impl Variants<LiquidityPoolWithdrawResultCode> for LiquidityPoolWithdrawResult

fn variants() -> Iter<'static, LiquidityPoolWithdrawResultCode>

impl Variants<LiquidityPoolWithdrawResultCode> for LiquidityPoolWithdrawResultCode

fn variants() -> Iter<'static, LiquidityPoolWithdrawResultCode>

impl WriteXdr for LiquidityPoolWithdrawResultCode

fn write_xdr<W: Write>(&self, w: &mut Limited<W>) -> Result<(), Error>

Available on crate feature std only.

fn to_xdr(&self, limits: Limits) -> Result<Vec<u8>, Error>

Available on crate feature std only.

fn to_xdr_base64(&self, limits: Limits) -> Result<String, Error>

Available on crate feature base64 only.

impl Copy for LiquidityPoolWithdrawResultCode

impl Enum for LiquidityPoolWithdrawResultCode

impl Eq for LiquidityPoolWithdrawResultCode

impl StructuralPartialEq for LiquidityPoolWithdrawResultCode

impl Union<LiquidityPoolWithdrawResultCode> for LiquidityPoolWithdrawResult